Commit e0243e19 authored by Shannon Nelson's avatar Shannon Nelson Committed by Jakub Kicinski

ionic: use mc sync for multicast filters

We should be using the multicast sync routines for the multicast
filters.  Also, let's just flatten the logic a bit and pull
the small unicast routine back into ionic_set_rx_mode().

Fixes: 1800eee1 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: default avatarShannon Nelson <snelson@pensando.io>
Reviewed-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent a8205ab6
......@@ -1149,15 +1149,6 @@ static void _ionic_lif_rx_mode(struct ionic_lif *lif, unsigned int rx_mode,
}
}
static void ionic_dev_uc_sync(struct net_device *netdev, bool from_ndo)
{
if (from_ndo)
__dev_uc_sync(netdev, ionic_ndo_addr_add, ionic_ndo_addr_del);
else
__dev_uc_sync(netdev, ionic_addr_add, ionic_addr_del);
}
static void ionic_set_rx_mode(struct net_device *netdev, bool from_ndo)
{
struct ionic_lif *lif = netdev_priv(netdev);
......@@ -1177,7 +1168,10 @@ static void ionic_set_rx_mode(struct net_device *netdev, bool from_ndo)
* we remove our overflow flag and check the netdev flags
* to see if we can disable NIC PROMISC
*/
ionic_dev_uc_sync(netdev, from_ndo);
if (from_ndo)
__dev_uc_sync(netdev, ionic_ndo_addr_add, ionic_ndo_addr_del);
else
__dev_uc_sync(netdev, ionic_addr_add, ionic_addr_del);
nfilters = le32_to_cpu(lif->identity->eth.max_ucast_filters);
if (netdev_uc_count(netdev) + 1 > nfilters) {
rx_mode |= IONIC_RX_MODE_F_PROMISC;
......@@ -1189,7 +1183,10 @@ static void ionic_set_rx_mode(struct net_device *netdev, bool from_ndo)
}
/* same for multicast */
ionic_dev_uc_sync(netdev, from_ndo);
if (from_ndo)
__dev_mc_sync(netdev, ionic_ndo_addr_add, ionic_ndo_addr_del);
else
__dev_mc_sync(netdev, ionic_addr_add, ionic_addr_del);
nfilters = le32_to_cpu(lif->identity->eth.max_mcast_filters);
if (netdev_mc_count(netdev) > nfilters) {
rx_mode |= IONIC_RX_MODE_F_ALLMULTI;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment