b43: N-PHY: fix gain in b43_nphy_get_gain_ctl_workaround_ent()

There were no break statements in this switch statement so everything
used the default settings.  Per Walter Harms's suggestion, I've replaced
the switch statement and done a little cleanup.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/tables_nphy.c

@@ -3226,8 +3226,6 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
 {
 	struct nphy_gain_ctl_workaround_entry *e;
 	u8 phy_idx;
-	u8 tr_iso = ghz5 ? dev->dev->bus_sprom->fem.ghz5.tr_iso :
-			   dev->dev->bus_sprom->fem.ghz2.tr_iso;
 
 	if (!ghz5 && dev->phy.rev >= 6 && dev->phy.radio_rev == 11)
 		return &nphy_gain_ctl_wa_phy6_radio11_ghz2;
@@ -3249,6 +3247,10 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
 		    !b43_channel_type_is_40mhz(dev->phy.channel_type))
 			e->cliplo_gain = 0x2d;
 	} else if (!ghz5 && dev->phy.rev >= 5) {
+		static const int gain_data[] = {0x0062, 0x0064, 0x006a, 0x106a,
+						0x106c, 0x1074, 0x107c, 0x207c};
+		u8 tr_iso = dev->dev->bus_sprom->fem.ghz2.tr_iso;
+
 		if (ext_lna) {
 			e->rfseq_init[0] &= ~0x4000;
 			e->rfseq_init[1] &= ~0x4000;
@@ -3256,26 +3258,10 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
 			e->rfseq_init[3] &= ~0x4000;
 			e->init_gain &= ~0x4000;
 		}
-		switch (tr_iso) {
-		case 0:
-			e->cliplo_gain = 0x0062;
-		case 1:
-			e->cliplo_gain = 0x0064;
-		case 2:
-			e->cliplo_gain = 0x006a;
-		case 3:
-			e->cliplo_gain = 0x106a;
-		case 4:
-			e->cliplo_gain = 0x106c;
-		case 5:
-			e->cliplo_gain = 0x1074;
-		case 6:
-			e->cliplo_gain = 0x107c;
-		case 7:
-			e->cliplo_gain = 0x207c;
-		default:
-			e->cliplo_gain = 0x106a;
-		}
+		if (tr_iso > 7)
+			tr_iso = 3;
+		e->cliplo_gain = gain_data[tr_iso];
+
 	} else if (ghz5 && dev->phy.rev == 4 && ext_lna) {
 		e->rfseq_init[0] &= ~0x4000;
 		e->rfseq_init[1] &= ~0x4000;