ARM: zynq: dts: split up device tree

The purpose of the created zynq-7000.dtsi file is to describe the
hardware common to all Zynq 7000-based boards.  Also, get rid of the
zynq-ep107 device tree, since it is not hardware anyone can purchase.

Add a zc702 dts file based on the zynq-7000.dtsi.  Add it to the
dts/Makefile so it is built with the 'dtbs' target.
Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>

arch/arm/boot/dts/Makefile

@@ -103,5 +103,6 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
 dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 	wm8505-ref.dtb \
 	wm8650-mid.dtb
+dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 endif

arch/arm/boot/dts/zynq-ep107.dts → arch/arm/boot/dts/zynq-7000.dtsi

@@ -10,29 +10,16 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
+/include/ "skeleton.dtsi"
 
-/dts-v1/;
 / {
-	model = "Xilinx Zynq EP107";
-	compatible = "xlnx,zynq-ep107";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk";
-		linux,stdout-path = &uart0;
-	};
+	compatible = "xlnx,zynq-7000";
 
 	amba {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		interrupt-parent = <&intc>;
 		ranges;
 
 		intc: interrupt-controller@f8f01000 {

arch/arm/boot/dts/zynq-zc702.dts

+/*
+ *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC702 Development Board";
+	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyPS1,115200 earlyprintk";
+	};
+
+};

arch/arm/mach-zynq/common.c

@@ -115,7 +115,8 @@ static void __init xilinx_map_io(void)
 }
 
 static const char *xilinx_dt_match[] = {
-	"xlnx,zynq-ep107",
+	"xlnx,zynq-zc702",
+	"xlnx,zynq-7000",
 	NULL
 };