staging: brcm80211: store HT operation mode settings from mac80211

The HT operation mode is provided by mac80211 and they are now
stored in the driver.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmsmac/wl_mac80211.c

@@ -357,7 +357,13 @@ wl_ops_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_HT) {
 		/* 802.11n parameters changed */
 		u16 mode = info->ht_operation_mode;
-		WL_NONE("%s: HT mode: 0x%04X (implement)\n", __func__, mode);
+		WL_NONE("%s: HT mode: 0x%04X\n", __func__, mode);
+		wlc_protection_upd(wl->wlc, WLC_PROT_N_CFG,
+			mode & IEEE80211_HT_OP_MODE_PROTECTION);
+		wlc_protection_upd(wl->wlc, WLC_PROT_N_NONGF,
+			mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+		wlc_protection_upd(wl->wlc, WLC_PROT_N_OBSS,
+			mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
 	}
 	if (changed & BSS_CHANGED_BASIC_RATES) {
 		/* Basic rateset changed */

drivers/staging/brcm80211/brcmsmac/wlc_mac80211.h

@@ -29,19 +29,6 @@
 #define	MAXCOREREV		28	/* max # supported core revisions (0 .. MAXCOREREV - 1) */
 #define WLC_MAXMODULES		22	/* max #  wlc_module_register() calls */
 
-/* network protection config */
-#define	WLC_PROT_G_SPEC		1	/* SPEC g protection */
-#define	WLC_PROT_G_OVR		2	/* SPEC g prot override */
-#define	WLC_PROT_G_USER		3	/* gmode specified by user */
-#define	WLC_PROT_OVERLAP	4	/* overlap */
-#define	WLC_PROT_N_USER		10	/* nmode specified by user */
-#define	WLC_PROT_N_CFG		11	/* n protection */
-#define	WLC_PROT_N_CFG_OVR	12	/* n protection override */
-#define	WLC_PROT_N_NONGF	13	/* non-GF protection */
-#define	WLC_PROT_N_NONGF_OVR	14	/* non-GF protection override */
-#define	WLC_PROT_N_PAM_OVR	15	/* n preamble override */
-#define	WLC_PROT_N_OBSS		16	/* non-HT OBSS present */
-
 #define WLC_BITSCNT(x)	bcm_bitcount((u8 *)&(x), sizeof(u8))
 
 /* Maximum wait time for a MAC suspend */
@@ -847,7 +834,6 @@ extern void wlc_set_cwmax(struct wlc_info *wlc, u16 newmax);
 extern void wlc_fifoerrors(struct wlc_info *wlc);
 extern void wlc_pllreq(struct wlc_info *wlc, bool set, mbool req_bit);
 extern void wlc_reset_bmac_done(struct wlc_info *wlc);
-extern void wlc_protection_upd(struct wlc_info *wlc, uint idx, int val);
 extern void wlc_hwtimer_gptimer_set(struct wlc_info *wlc, uint us);
 extern void wlc_hwtimer_gptimer_abort(struct wlc_info *wlc);
 

drivers/staging/brcm80211/brcmsmac/wlc_pub.h

@@ -481,6 +481,19 @@ extern const u8 wme_fifo2ac[];
 #define WLC_USE_COREFLAGS	0xffffffff	/* invalid core flags, use the saved coreflags */
 
 
+/* network protection config */
+#define	WLC_PROT_G_SPEC		1	/* SPEC g protection */
+#define	WLC_PROT_G_OVR		2	/* SPEC g prot override */
+#define	WLC_PROT_G_USER		3	/* gmode specified by user */
+#define	WLC_PROT_OVERLAP	4	/* overlap */
+#define	WLC_PROT_N_USER		10	/* nmode specified by user */
+#define	WLC_PROT_N_CFG		11	/* n protection */
+#define	WLC_PROT_N_CFG_OVR	12	/* n protection override */
+#define	WLC_PROT_N_NONGF	13	/* non-GF protection */
+#define	WLC_PROT_N_NONGF_OVR	14	/* non-GF protection override */
+#define	WLC_PROT_N_PAM_OVR	15	/* n preamble override */
+#define	WLC_PROT_N_OBSS		16	/* non-HT OBSS present */
+
 /* common functions for every port */
 extern void *wlc_attach(void *wl, u16 vendor, u16 device, uint unit,
 			bool piomode, struct osl_info *osh, void *regsva,
@@ -514,6 +527,7 @@ extern int wlc_ioctl(struct wlc_info *wlc, int cmd, void *arg, int len,
 		     struct wlc_if *wlcif);
 /* helper functions */
 extern void wlc_statsupd(struct wlc_info *wlc);
+extern void wlc_protection_upd(struct wlc_info *wlc, uint idx, int val);
 extern int wlc_get_header_len(void);
 extern void wlc_mac_bcn_promisc_change(struct wlc_info *wlc, bool promisc);
 extern void wlc_set_addrmatch(struct wlc_info *wlc, int match_reg_offset,