Skip to content

L
linux
Commit e10bc84d authored by Yaniv Rosner's avatar Yaniv Rosner Committed by David S. Miller
Browse files
Options

bnx2x: Unify PHY attributes 

Start building the infrastructure for dual media by adding new component
of PHY which will be used all along the function. Modify function to
work with this component instead of the link_params.
Signed-off-by: default avatarYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent db40980f
Hide whitespace changes
Inline Side-by-side
Showing with 916 additions and 1386 deletions
drivers/net/bnx2x/bnx2x_ethtool.c
View file @ e10bc84d
......@@ -811,7 +811,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
struct bnx2x *bp = netdev_priv(dev);
int port = BP_PORT(bp);
int rc = 0;
u32 ext_phy_config;
if (!netif_running(dev))
return -EAGAIN;
......@@ -827,6 +827,10 @@ static int bnx2x_set_eeprom(struct net_device *dev,
!bp->port.pmf)
return -EINVAL;
ext_phy_config =
SHMEM_RD(bp,
dev_info.port_hw_config[port].external_phy_config);
if (eeprom->magic == 0x50485950) {
/* 'PHYP' (0x50485950): prepare phy for FW upgrade */
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
......@@ -834,7 +838,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
bnx2x_acquire_phy_lock(bp);
rc |= bnx2x_link_reset(&bp->link_params,
&bp->link_vars, 0);
if (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config) ==
if (XGXS_EXT_PHY_TYPE(ext_phy_config) ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101)
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
MISC_REGISTERS_GPIO_HIGH, port);
......@@ -855,10 +859,8 @@ static int bnx2x_set_eeprom(struct net_device *dev,
}
} else if (eeprom->magic == 0x53985943) {
/* 'PHYC' (0x53985943): PHY FW upgrade completed */
if (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config) ==
if (XGXS_EXT_PHY_TYPE(ext_phy_config) ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) {
u8 ext_phy_addr =
XGXS_EXT_PHY_ADDR(bp->link_params.ext_phy_config);
/* DSP Remove Download Mode */
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
......@@ -866,7 +868,8 @@ static int bnx2x_set_eeprom(struct net_device *dev,
bnx2x_acquire_phy_lock(bp);
bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
bnx2x_sfx7101_sp_sw_reset(bp,
&bp->link_params.phy[EXT_PHY1]);
/* wait 0.5 sec to allow it to run */
msleep(500);
......
drivers/net/bnx2x/bnx2x_hsi.h
View file @ e10bc84d
......@@ -120,6 +120,23 @@ struct shared_hw_cfg { /* NVRAM Offset */
#define SHARED_HW_CFG_FAN_FAILURE_DISABLED 0x00080000
#define SHARED_HW_CFG_FAN_FAILURE_ENABLED 0x00100000
/* Set the MDC/MDIO access for the first external phy */
#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK 0x1C000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_SHIFT 26
#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_PHY_TYPE 0x00000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC0 0x04000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1 0x08000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH 0x0c000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED 0x10000000
/* Set the MDC/MDIO access for the second external phy */
#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK 0xE0000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_SHIFT 29
#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_PHY_TYPE 0x00000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_EMAC0 0x20000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_EMAC1 0x40000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_BOTH 0x60000000
#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_SWAPPED 0x80000000
u32 power_dissipated; /* 0x11c */
#define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000
#define SHARED_HW_CFG_POWER_DIS_CMN_SHIFT 24
......
drivers/net/bnx2x/bnx2x_link.c
View file @ e10bc84d
This source diff could not be displayed because it is too large. You can view the blob instead.
drivers/net/bnx2x/bnx2x_link.h
View file @ e10bc84d
/* Copyright 2008-2009 Broadcom Corporation
/* Copyright 2008-2010 Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
......@@ -46,9 +46,35 @@
#define SFP_EEPROM_PART_NO_ADDR 0x28
#define SFP_EEPROM_PART_NO_SIZE 16
#define PWR_FLT_ERR_MSG_LEN 250
/* Single Media Direct board is the plain 577xx board with CX4/RJ45 jacks */
#define SINGLE_MEDIA_DIRECT(params) (params->num_phys == 1)
/* Single Media board contains single external phy */
#define SINGLE_MEDIA(params) (params->num_phys == 2)
/***********************************************************/
/* Structs */
/***********************************************************/
#define INT_PHY 0
#define EXT_PHY1 1
#define MAX_PHYS 2
/***********************************************************/
/* bnx2x_phy struct */
/* Defines the required arguments and function per phy */
/***********************************************************/
struct link_vars;
struct link_params;
struct bnx2x_phy;
struct bnx2x_phy {
u32 type;
/* Loaded during init */
u8 addr;
u32 mdio_ctrl;
};
/* Inputs parameters to the CLC */
struct link_params {
......@@ -106,6 +132,11 @@ struct link_params {
#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
#define FEATURE_CONFIG_BCM8727_NOC (1<<3)
/* Will be populated during common init */
struct bnx2x_phy phy[MAX_PHYS];
/* Will be populated during common init */
u8 num_phys;
/* Device pointer passed to all callback functions */
struct bnx2x *bp;
......@@ -155,17 +186,20 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
/* bnx2x_link_update should be called upon link interrupt */
u8 bnx2x_link_update(struct link_params *input, struct link_vars *output);
/* use the following cl45 functions to read/write from external_phy
/* use the following phy functions to read/write from external_phy
In order to use it to read/write internal phy registers, use
DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as
Use ext_phy_type of 0 in case of cl22 over cl45
the register */
u8 bnx2x_cl45_read(struct bnx2x *bp, u8 port, u32 ext_phy_type,
u8 phy_addr, u8 devad, u16 reg, u16 *ret_val);
u8 bnx2x_phy_read(struct link_params *params, u8 phy_addr,
u8 devad, u16 reg, u16 *ret_val);
u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
u8 phy_addr, u8 devad, u16 reg, u16 val);
u8 bnx2x_phy_write(struct link_params *params, u8 phy_addr,
u8 devad, u16 reg, u16 val);
u8 bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
u8 devad, u16 reg, u16 *ret_val);
u8 bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
u8 devad, u16 reg, u16 val);
/* Reads the link_status from the shmem,
and update the link vars accordingly */
void bnx2x_link_status_update(struct link_params *input,
......@@ -198,9 +232,14 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base);
/* Reset the external PHY using GPIO */
void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr);
/* Reset the external of SFX7101 */
void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy);
u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr,
u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params, u16 addr,
u8 byte_cnt, u8 *o_buf);
/* Returns the aggregative supported attributes of the phys on board */
u32 bnx2x_supported_attr(struct link_params *params, u8 phy_idx);
/* Probe the phys on board, and populate them in "params" */
u8 bnx2x_phy_probe(struct link_params *params);
#endif /* BNX2X_LINK_H */
drivers/net/bnx2x/bnx2x_main.c
View file @ e10bc84d
......@@ -4351,7 +4351,6 @@ static int bnx2x_init_port(struct bnx2x *bp)
default:
break;
}
bnx2x__link_reset(bp);
return 0;
......@@ -6984,23 +6983,15 @@ static int bnx2x_mdio_read(struct net_device *netdev, int prtad,
struct bnx2x *bp = netdev_priv(netdev);
u16 value;
int rc;
u32 phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n",
prtad, devad, addr);
if (prtad != bp->mdio.prtad) {
DP(NETIF_MSG_LINK, "prtad missmatch (cmd:0x%x != bp:0x%x)\n",
prtad, bp->mdio.prtad);
return -EINVAL;
}
/* The HW expects different devad if CL22 is used */
devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
bnx2x_acquire_phy_lock(bp);
rc = bnx2x_cl45_read(bp, BP_PORT(bp), phy_type, prtad,
devad, addr, &value);
rc = bnx2x_phy_read(&bp->link_params, prtad, devad, addr, &value);
bnx2x_release_phy_lock(bp);
DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc);
......@@ -7014,24 +7005,16 @@ static int bnx2x_mdio_write(struct net_device *netdev, int prtad, int devad,
u16 addr, u16 value)
{
struct bnx2x *bp = netdev_priv(netdev);
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
int rc;
DP(NETIF_MSG_LINK, "mdio_write: prtad 0x%x, devad 0x%x, addr 0x%x,"
" value 0x%x\n", prtad, devad, addr, value);
if (prtad != bp->mdio.prtad) {
DP(NETIF_MSG_LINK, "prtad missmatch (cmd:0x%x != bp:0x%x)\n",
prtad, bp->mdio.prtad);
return -EINVAL;
}
/* The HW expects different devad if CL22 is used */
devad = (devad == MDIO_DEVAD_NONE) ? DEFAULT_PHY_DEV_ADDR : devad;
bnx2x_acquire_phy_lock(bp);
rc = bnx2x_cl45_write(bp, BP_PORT(bp), ext_phy_type, prtad,
devad, addr, value);
rc = bnx2x_phy_write(&bp->link_params, prtad, devad, addr, value);
bnx2x_release_phy_lock(bp);
return rc;
}
......
drivers/net/bnx2x/bnx2x_reg.h
View file @ e10bc84d
......@@ -5135,18 +5135,22 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
#define MDIO_PMA_REG_8727_MISC_CTRL 0x8309
#define MDIO_PMA_REG_8727_TX_CTRL1 0xca02
#define MDIO_PMA_REG_8727_TX_CTRL2 0xca05
#define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808
#define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e
#define MDIO_PMA_REG_8727_PCS_GP 0xc842
#define MDIO_AN_REG_8727_MISC_CTRL 0x8309
#define MDIO_PMA_REG_8073_CHIP_REV 0xc801
#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820
#define MDIO_PMA_REG_8073_XAUI_WA 0xc841
#define MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL 0xcd08
#define MDIO_PMA_REG_7101_RESET 0xc000
#define MDIO_PMA_REG_7107_LED_CNTL 0xc007
#define MDIO_PMA_REG_7107_LINK_LED_CNTL 0xc009
#define MDIO_PMA_REG_7101_VER1 0xc026
#define MDIO_PMA_REG_7101_VER2 0xc027
......@@ -5210,11 +5214,13 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_AN_REG_CL37_FC_LP 0xffe5
#define MDIO_AN_REG_8073_2_5G 0x8329
#define MDIO_AN_REG_8073_BAM 0x8350
#define MDIO_AN_REG_8727_MISC_CTRL 0x8309
#define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020
#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
#define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1
#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6
#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5
#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7