ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC

Note that with 9730 the wiring is different compared to 9514 found on
beagleboard xm for example.

On beagleboard xm we have:

/sys/bus/usb/devices/1-2	hub
/sys/bus/usb/devices/1-2.1	9514

While on omap5-uevm we have:

/sys/bus/usb/devices/1-2	hub
/sys/bus/usb/devices/1-3	9730

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/omap5-uevm.dts

@@ -18,6 +18,10 @@ memory@80000000 {
 		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
 	};
 
+	aliases {
+		ethernet = &ethernet;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led1 {
@@ -164,6 +168,23 @@ OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
 	>;
 };
 
+&usbhsehci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@2 {
+		compatible = "usb424,3503";
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	ethernet: usbether@3 {
+		compatible = "usb424,9730";
+		reg = <3>;
+	};
+};
+
 &wlcore {
 	compatible = "ti,wl1837";
 };