Merge kroah.com:/home/greg/linux/BK/bleeding_edge-2.5

into kroah.com:/home/greg/linux/BK/pci_hp-2.5

drivers/hotplug/Config.help

@@ -40,3 +40,14 @@ CONFIG_HOTPLUG_PCI_IBM
 
   When in doubt, say N.
 
+CONFIG_HOTPLUG_PCI_ACPI
+  Say Y here if you have a system that supports PCI Hotplug using
+  ACPI.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called acpiphp.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+  When in doubt, say N.
+

drivers/hotplug/Config.in

@@ -11,5 +11,6 @@ dep_mbool '    Save configuration into NVRAM on Compaq servers' CONFIG_HOTPLUG_P
 if [ "$CONFIG_X86_IO_APIC" = "y" ]; then
    dep_tristate '  IBM PCI Hotplug driver' CONFIG_HOTPLUG_PCI_IBM $CONFIG_HOTPLUG_PCI $CONFIG_X86_IO_APIC $CONFIG_X86
 fi
+dep_tristate '  ACPI PCI Hotplug driver' CONFIG_HOTPLUG_PCI_ACPI $CONFIG_APCI $CONFIG_HOTPLUG_PCI
 
 endmenu

drivers/hotplug/Makefile

@@ -7,6 +7,7 @@ export-objs	:= pci_hotplug_core.o pci_hotplug_util.o
 obj-$(CONFIG_HOTPLUG_PCI)		+= pci_hotplug.o
 obj-$(CONFIG_HOTPLUG_PCI_COMPAQ)	+= cpqphp.o
 obj-$(CONFIG_HOTPLUG_PCI_IBM)		+= ibmphp.o
+obj-$(CONFIG_HOTPLUG_PCI_ACPI)		+= acpiphp.o
 
 pci_hotplug-objs	:=	pci_hotplug_core.o	\
 				pci_hotplug_util.o
@@ -22,6 +23,18 @@ ibmphp-objs		:=	ibmphp_core.o	\
 				ibmphp_res.o	\
 				ibmphp_hpc.o
 
+acpiphp-objs		:=	acpiphp_core.o	\
+				acpiphp_glue.o	\
+				acpiphp_pci.o	\
+				acpiphp_res.o
+
+ifdef CONFIG_HOTPLUG_PCI_ACPI
+  EXTRA_CFLAGS  += -D_LINUX -I$(TOPDIR)/drivers/acpi
+  ifdef CONFIG_ACPI_DEBUG
+    EXTRA_CFLAGS += -DACPI_DEBUG_OUTPUT
+  endif
+endif
+
 ifeq ($(CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM),y)
 	cpqphp-objs += cpqphp_nvram.o
 endif

drivers/hotplug/acpiphp.h

+/*
+ * ACPI PCI Hot Plug Controller Driver
+ *
+ * Copyright (c) 1995,2001 Compaq Computer Corporation
+ * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (c) 2001 IBM Corp.
+ * Copyright (c) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
+ * Copyright (c) 2002 Takayoshi Kochi (t-kouchi@cq.jp.nec.com)
+ * Copyright (c) 2002 NEC Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gregkh@us.ibm.com>,
+ *		    <h-aono@ap.jp.nec.com>,
+ *		    <t-kouchi@cq.jp.nec.com>
+ *
+ */
+
+#ifndef _ACPIPHP_H
+#define _ACPIPHP_H
+
+#include "include/acpi.h"
+#include "pci_hotplug.h"
+#include "acpi_bus.h"
+
+#define dbg(format, arg...)					\
+	do {							\
+		if (acpiphp_debug)				\
+			printk (KERN_DEBUG "%s: " format "\n",	\
+				MY_NAME , ## arg); 		\
+	} while (0)
+#define err(format, arg...) printk (KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
+#define info(format, arg...) printk (KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
+#define warn(format, arg...) printk (KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
+
+#define SLOT_MAGIC	0x67267322
+/* name size which is used for entries in pcihpfs */
+#define SLOT_NAME_SIZE	32		/* ACPI{_SUN}-{BUS}:{DEV} */
+
+struct acpiphp_bridge;
+struct acpiphp_slot;
+struct pci_resource;
+
+/*
+ * struct slot - slot information for each *physical* slot
+ */
+struct slot {
+	u32 magic;
+	u8 number;
+	struct hotplug_slot	*hotplug_slot;
+	struct list_head	slot_list;
+
+	struct acpiphp_slot	*acpi_slot;
+};
+
+/*
+ * struct pci_resource - describes pci resource (mem, pfmem, io, bus)
+ */
+struct pci_resource {
+	struct pci_resource * next;
+	u64 base;
+	u32 length;
+};
+
+/**
+ * struct hpp_param - ACPI 2.0 _HPP Hot Plug Parameters
+ * @cache_line_size in DWORD
+ * @latency_timer in PCI clock
+ * @enable_SERR 0 or 1
+ * @enable_PERR 0 or 1
+ */
+struct hpp_param {
+	u8 cache_line_size;
+	u8 latency_timer;
+	u8 enable_SERR;
+	u8 enable_PERR;
+};
+
+
+/**
+ * struct acpiphp_bridge - PCI bridge information
+ *
+ * for each bridge device in ACPI namespace
+ */
+struct acpiphp_bridge {
+	struct list_head list;
+	acpi_handle handle;
+	struct acpiphp_slot *slots;
+	int type;
+	int nr_slots;
+
+	u8 seg;
+	u8 bus;
+	u8 sub;
+
+	u32 flags;
+
+	/* This bus (host bridge) or Secondary bus (PCI-to-PCI bridge) */
+	struct pci_bus *pci_bus;
+
+	/* PCI-to-PCI bridge device */
+	struct pci_dev *pci_dev;
+
+	/* ACPI 2.0 _HPP parameters */
+	struct hpp_param hpp;
+
+	spinlock_t res_lock;
+
+	/* available resources on this bus */
+	struct pci_resource *mem_head;
+	struct pci_resource *p_mem_head;
+	struct pci_resource *io_head;
+	struct pci_resource *bus_head;
+};
+
+
+/**
+ * struct acpiphp_slot - PCI slot information
+ *
+ * PCI slot information for each *physical* PCI slot
+ */
+struct acpiphp_slot {
+	struct acpiphp_slot *next;
+	struct acpiphp_bridge *bridge;	/* parent */
+	struct list_head funcs;		/* one slot may have different
+					   objects (i.e. for each function) */
+	struct semaphore crit_sect;
+
+	u32		id;		/* slot id (serial #) for hotplug core */
+	u8		device;		/* pci device# */
+
+	u32		sun;		/* ACPI _SUN (slot unique number) */
+	u32		slotno;		/* slot number relative to bridge */
+	u32		flags;		/* see below */
+};
+
+
+/**
+ * struct acpiphp_func - PCI function information
+ *
+ * PCI function information for each object in ACPI namespace
+ * typically 8 objects per slot (i.e. for each PCI function)
+ */
+struct acpiphp_func {
+	struct acpiphp_slot *slot;	/* parent */
+
+	struct list_head sibling;
+	struct pci_dev *pci_dev;
+
+	acpi_handle	handle;
+
+	u8		function;	/* pci function# */
+	u32		flags;		/* see below */
+
+	/* resources used for this function */
+	struct pci_resource *mem_head;
+	struct pci_resource *p_mem_head;
+	struct pci_resource *io_head;
+	struct pci_resource *bus_head;
+};
+
+
+/* PCI bus bridge HID */
+#define ACPI_PCI_HOST_HID		"PNP0A03"
+
+/* PCI BRIDGE type */
+#define BRIDGE_TYPE_HOST		0
+#define BRIDGE_TYPE_P2P			1
+
+/* ACPI _STA method value (ignore bit 4; battery present) */
+#define ACPI_STA_PRESENT		(0x00000001)
+#define ACPI_STA_ENABLED		(0x00000002)
+#define ACPI_STA_SHOW_IN_UI		(0x00000004)
+#define ACPI_STA_FUNCTIONING		(0x00000008)
+#define ACPI_STA_ALL			(0x0000000f)
+
+/* bridge flags */
+#define BRIDGE_HAS_STA		(0x00000001)
+#define BRIDGE_HAS_EJ0		(0x00000002)
+#define BRIDGE_HAS_HPP		(0x00000004)
+#define BRIDGE_HAS_PS0		(0x00000010)
+#define BRIDGE_HAS_PS1		(0x00000020)
+#define BRIDGE_HAS_PS2		(0x00000040)
+#define BRIDGE_HAS_PS3		(0x00000080)
+
+/* slot flags */
+
+#define SLOT_POWEREDON		(0x00000001)
+#define SLOT_ENABLED		(0x00000002)
+#define SLOT_MULTIFUNCTION	(x000000004)
+
+/* function flags */
+
+#define FUNC_HAS_STA		(0x00000001)
+#define FUNC_HAS_EJ0		(0x00000002)
+#define FUNC_HAS_PS0		(0x00000010)
+#define FUNC_HAS_PS1		(0x00000020)
+#define FUNC_HAS_PS2		(0x00000040)
+#define FUNC_HAS_PS3		(0x00000080)
+
+/* not yet */
+#define SLOT_SUPPORT_66MHZ	(0x00010000)
+#define SLOT_SUPPORT_100MHZ	(0x00020000)
+#define SLOT_SUPPORT_133MHZ	(0x00040000)
+#define SLOT_SUPPORT_PCIX	(0x00080000)
+
+/* function prototypes */
+
+/* acpiphp_glue.c */
+extern int acpiphp_glue_init (void);
+extern void acpiphp_glue_exit (void);
+extern int acpiphp_get_num_slots (void);
+extern struct acpiphp_slot *get_slot_from_id (int id);
+typedef int (*acpiphp_callback)(struct acpiphp_slot *slot, void *data);
+extern int acpiphp_for_each_slot (acpiphp_callback fn, void *data);
+
+extern int acpiphp_check_bridge (struct acpiphp_bridge *bridge);
+extern int acpiphp_enable_slot (struct acpiphp_slot *slot);
+extern int acpiphp_disable_slot (struct acpiphp_slot *slot);
+extern u8 acpiphp_get_power_status (struct acpiphp_slot *slot);
+extern u8 acpiphp_get_attention_status (struct acpiphp_slot *slot);
+extern u8 acpiphp_get_latch_status (struct acpiphp_slot *slot);
+extern u8 acpiphp_get_adapter_status (struct acpiphp_slot *slot);
+
+/* acpiphp_pci.c */
+extern struct pci_dev *acpiphp_allocate_pcidev (struct pci_bus *pbus, int dev, int fn);
+extern int acpiphp_configure_slot (struct acpiphp_slot *slot);
+extern int acpiphp_configure_function (struct acpiphp_func *func);
+extern int acpiphp_unconfigure_function (struct acpiphp_func *func);
+extern int acpiphp_detect_pci_resource (struct acpiphp_bridge *bridge);
+extern int acpiphp_init_func_resource (struct acpiphp_func *func);
+
+/* acpiphp_res.c */
+extern struct pci_resource *acpiphp_get_io_resource (struct pci_resource **head, u32 size);
+extern struct pci_resource *acpiphp_get_max_resource (struct pci_resource **head, u32 size);
+extern struct pci_resource *acpiphp_get_resource (struct pci_resource **head, u32 size);
+extern struct pci_resource *acpiphp_get_resource_with_base (struct pci_resource **head, u64 base, u32 size);
+extern int acpiphp_resource_sort_and_combine (struct pci_resource **head);
+extern struct pci_resource *acpiphp_make_resource (u64 base, u32 length);
+extern void acpiphp_move_resource (struct pci_resource **from, struct pci_resource **to);
+extern void acpiphp_free_resource (struct pci_resource **res);
+extern void acpiphp_dump_resource (struct acpiphp_bridge *bridge); /* debug */
+extern void acpiphp_dump_func_resource (struct acpiphp_func *func); /* debug */
+
+/* variables */
+extern int acpiphp_debug;
+
+#endif /* _ACPIPHP_H */

drivers/hotplug/cpqphp_core.c

@@ -1110,6 +1110,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/*
 	 * Get IO, memory, and IRQ resources for new devices
 	 */
+	// The next line is required for cpqhp_find_available_resources
+	ctrl->interrupt = pdev->irq;
+
 	rc = cpqhp_find_available_resources(ctrl, cpqhp_rom_start);
 	ctrl->add_support = !rc;
 	if (rc) {
@@ -1138,7 +1141,6 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK);
 
 	/* set up the interrupt */
-	ctrl->interrupt = pdev->irq;
 	dbg("HPC interrupt = %d \n", ctrl->interrupt);
 	if (request_irq(ctrl->interrupt,
 			(void (*)(int, void *, struct pt_regs *)) &cpqhp_ctrl_intr,

drivers/hotplug/cpqphp_pci.c

@@ -360,8 +360,8 @@ int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
 	    __FUNCTION__, dev_num, bus_num, int_pin, irq_num);
 	rc = pcibios_set_irq_routing(&fakedev, int_pin - 0x0a, irq_num);
 	dbg("%s: rc %d\n", __FUNCTION__, rc);
-	if (rc)
-		return rc;
+	if (!rc)
+		return !rc;
 
 	// set the Edge Level Control Register (ELCR)
 	temp_word = inb(0x4d0);

drivers/hotplug/ibmphp_core.c

@@ -686,9 +686,10 @@ static int validate (struct slot *slot_cur, int opn)
 int ibmphp_update_slot_info (struct slot *slot_cur)
 {
 	struct hotplug_slot_info *info;
-	char buffer[10];
+	char buffer[30];
 	int rc;
-//	u8 bus_speed;
+	u8 bus_speed;
+	u8 mode;
 
 	info = kmalloc (sizeof (struct hotplug_slot_info), GFP_KERNEL);
 	if (!info) {
@@ -696,7 +697,7 @@ int ibmphp_update_slot_info (struct slot *slot_cur)
 		return -ENOMEM;
 	}
         
-	snprintf (buffer, 10, "%d", slot_cur->number);
+	strncpy (buffer, slot_cur->hotplug_slot->name, 30);
 	info->power_status = SLOT_PWRGD (slot_cur->status);
 	info->attention_status = SLOT_ATTN (slot_cur->status, slot_cur->ext_status);
 	info->latch_status = SLOT_LATCH (slot_cur->status);
@@ -707,21 +708,33 @@ int ibmphp_update_slot_info (struct slot *slot_cur)
                 info->adapter_status = 1;
 //		get_max_adapter_speed_1 (slot_cur->hotplug_slot, &info->max_adapter_speed_status, 0);
 	}
-	/* !!!!!!!!!TO DO: THIS NEEDS TO CHANGE!!!!!!!!!!!!! */
-/*	bus_speed = slot_cur->bus_on->current_speed;
-	bus_speed &= 0x0f;
-                        
-	if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCIX)
-		bus_speed |= 0x80;
-	else if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCI)
-		bus_speed |= 0x40;
-	else
-		bus_speed |= 0x20;
 
-	info->cur_bus_speed_status = bus_speed;
-	info->max_bus_speed_status = slot_cur->hotplug_slot->info->max_bus_speed_status;
+	bus_speed = slot_cur->bus_on->current_speed;
+	mode = slot_cur->bus_on->current_bus_mode;
+
+	switch (bus_speed) {
+	case BUS_SPEED_33:
+		break;
+	case BUS_SPEED_66:
+		if (mode == BUS_MODE_PCIX) 
+			bus_speed += 0x01;
+		else if (mode == BUS_MODE_PCI)
+			;
+		else
+			bus_speed = PCI_SPEED_UNKNOWN;
+		break;
+	case BUS_SPEED_100:
+	case BUS_SPEED_133:
+		bus_speed += 0x01;
+		break;
+	default:
+		bus_speed = PCI_SPEED_UNKNOWN;
+	}
+
+	info->cur_bus_speed = bus_speed;
+	info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed;
 	// To do: bus_names 
-*/	
+	
 	rc = pci_hp_change_slot_info (buffer, info);
 	kfree (info);
 	return rc;
@@ -989,7 +1002,7 @@ static u8 bus_structure_fixup (u8 busno)
 	struct pci_dev *dev;
 	u16 l;
 
-	if (!find_bus (busno) || !(ibmphp_find_same_bus_num (busno)))
+	if (find_bus (busno) || !(ibmphp_find_same_bus_num (busno)))
 		return 1;
 
 	bus = kmalloc (sizeof (*bus), GFP_KERNEL);