[PATCH] PCMCIA: fix drivers broken by recent cleanup

Setting .ConfigBase and .Present is now done at the pcmcia core.

The driver cleanup missed a few places where the driver did set .Present
to PRESENT_OPTION and later to the values from the CIS.  Setting to
PRESENT_OPTION now overrides the values from the CIS.  So just remove
those lines.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/net/pcmcia/3c574_cs.c

@@ -281,7 +281,6 @@ static int tc574_probe(struct pcmcia_device *link)
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
-	link->conf.Present = PRESENT_OPTION;
 
 	/* The EL3-specific entries in the device structure. */
 	dev->hard_start_xmit = &el3_start_xmit;

drivers/net/pcmcia/3c589_cs.c

@@ -195,7 +195,6 @@ static int tc589_probe(struct pcmcia_device *link)
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
-    link->conf.Present = PRESENT_OPTION;
 
     /* The EL3-specific entries in the device structure. */
     SET_MODULE_OWNER(dev);

drivers/net/pcmcia/com20020_cs.c

@@ -173,7 +173,6 @@ static int com20020_probe(struct pcmcia_device *p_dev)
     p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
-    p_dev->conf.Present = PRESENT_OPTION;
 
     p_dev->irq.Instance = info->dev = dev;
     p_dev->priv = info;

drivers/net/pcmcia/xirc2ps_cs.c

@@ -576,7 +576,6 @@ xirc2ps_probe(struct pcmcia_device *link)
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
-    link->conf.Present = PRESENT_OPTION;
     link->irq.Handler = xirc2ps_interrupt;
     link->irq.Instance = dev;
 

drivers/net/wireless/netwave_cs.c

@@ -406,7 +406,6 @@ static int netwave_probe(struct pcmcia_device *link)
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
-    link->conf.Present = PRESENT_OPTION;
 
     /* Netwave private struct init. link/dev/node already taken care of,
      * other stuff zero'd - Jean II */

drivers/net/wireless/ray_cs.c

@@ -331,7 +331,6 @@ static int ray_probe(struct pcmcia_device *p_dev)
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
     p_dev->conf.ConfigIndex = 1;
-    p_dev->conf.Present = PRESENT_OPTION;
 
     p_dev->priv = dev;
     p_dev->irq.Instance = dev;

drivers/net/wireless/wl3501_cs.c

@@ -1928,7 +1928,6 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 	p_dev->conf.Attributes	= CONF_ENABLE_IRQ;
 	p_dev->conf.IntType	= INT_MEMORY_AND_IO;
 	p_dev->conf.ConfigIndex	= 1;
-	p_dev->conf.Present	= PRESENT_OPTION;
 
 	dev = alloc_etherdev(sizeof(struct wl3501_card));
 	if (!dev)

drivers/scsi/pcmcia/nsp_cs.c

@@ -1629,7 +1629,6 @@ static int nsp_cs_probe(struct pcmcia_device *link)
 	/* General socket configuration */
 	link->conf.Attributes	 = CONF_ENABLE_IRQ;
 	link->conf.IntType	 = INT_MEMORY_AND_IO;
-	link->conf.Present	 = PRESENT_OPTION;
 
 	ret = nsp_cs_config(link);
 

drivers/scsi/pcmcia/sym53c500_cs.c

@@ -895,7 +895,6 @@ SYM53C500_probe(struct pcmcia_device *link)
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
-	link->conf.Present = PRESENT_OPTION;
 
 	return SYM53C500_config(link);
 } /* SYM53C500_attach */