Input: remove wait_ms() in place of using msleep()

drivers/input/gameport/ns558.c

@@ -35,6 +35,7 @@
 #include <linux/ioport.h>
 #include <linux/config.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/gameport.h>
 #include <linux/slab.h>
 #include <linux/pnp.h>
@@ -103,7 +104,7 @@ static void ns558_isa_probe(int io)
 		i = 0;
 		goto out;
 	}
-	wait_ms(3);
+	msleep(3);
 /*
  * After some time (4ms) the axes shouldn't change anymore.
  */
@@ -129,7 +130,7 @@ static void ns558_isa_probe(int io)
 		outb(0xff, io & (-1 << i));
 		for (j = b = 0; j < 1000; j++)
 			if (inb(io & (-1 << i)) != inb((io & (-1 << i)) + (1 << i) - 1)) b++;
-		wait_ms(3);
+		msleep(3);
 
 		if (b > 300) {					/* We allow 30% difference */
 			release_region(io & (-1 << i), (1 << i));

drivers/input/gameport/vortex.c

@@ -40,6 +40,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <linux/gameport.h>
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
@@ -93,7 +94,7 @@ static int vortex_open(struct gameport *gameport, int mode)
 	switch (mode) {
 		case GAMEPORT_MODE_COOKED:
 			writeb(0x40, vortex->io + VORTEX_GCR);
-			wait_ms(VORTEX_DATA_WAIT);
+			msleep(VORTEX_DATA_WAIT);
 			return 0;
 		case GAMEPORT_MODE_RAW:
 			writeb(0x00, vortex->io + VORTEX_GCR);

drivers/input/joystick/adi.c

@@ -321,7 +321,7 @@ static void adi_init_digital(struct gameport *gameport)
 
 	for (i = 0; seq[i]; i++) {
 		gameport_trigger(gameport);
-		if (seq[i] > 0) wait_ms(seq[i]);
+		if (seq[i] > 0) msleep(seq[i]);
 		if (seq[i] < 0) mdelay(-seq[i]);
 	}
 }
@@ -513,9 +513,9 @@ static void adi_connect(struct gameport *gameport, struct gameport_dev *dev)
 		return;
 	}
 
-	wait_ms(ADI_INIT_DELAY);
+	msleep(ADI_INIT_DELAY);
 	if (adi_read(port)) {
-		wait_ms(ADI_DATA_DELAY);
+		msleep(ADI_DATA_DELAY);
 		adi_read(port);
 	}
 

drivers/input/joystick/analog.c

@@ -603,18 +603,18 @@ static int analog_init_port(struct gameport *gameport, struct gameport_dev *dev,
 
 		gameport_trigger(gameport);
 		t = gameport_read(gameport);
-		wait_ms(ANALOG_MAX_TIME);
+		msleep(ANALOG_MAX_TIME);
 		port->mask = (gameport_read(gameport) ^ t) & t & 0xf;
 		port->fuzz = (port->speed * ANALOG_FUZZ_MAGIC) / port->loop / 1000 + ANALOG_FUZZ_BITS;
 	
 		for (i = 0; i < ANALOG_INIT_RETRIES; i++) {
 			if (!analog_cooked_read(port)) break;
-			wait_ms(ANALOG_MAX_TIME);
+			msleep(ANALOG_MAX_TIME);
 		}
 
 		u = v = 0;
 
-		wait_ms(ANALOG_MAX_TIME);
+		msleep(ANALOG_MAX_TIME);
 		t = gameport_time(gameport, ANALOG_MAX_TIME * 1000);
 		gameport_trigger(gameport);
 		while ((gameport_read(port->gameport) & port->mask) && (u < t)) u++; 

drivers/input/joystick/gf2k.c

@@ -260,11 +260,11 @@ static void gf2k_connect(struct gameport *gameport, struct gameport_dev *dev)
 
 	gf2k_trigger_seq(gameport, gf2k_seq_reset);
 
-	wait_ms(GF2K_TIMEOUT);
+	msleep(GF2K_TIMEOUT);
 
 	gf2k_trigger_seq(gameport, gf2k_seq_digital);
 
-	wait_ms(GF2K_TIMEOUT);
+	msleep(GF2K_TIMEOUT);
 
 	if (gf2k_read_packet(gameport, GF2K_LENGTH, data) < 12)
 		goto fail2;

include/linux/gameport.h

@@ -118,10 +118,4 @@ static __inline__ int gameport_time(struct gameport *gameport, int time)
 	return (time * gameport->speed) / 1000;
 }
 
-static __inline__ void wait_ms(unsigned int ms)
-{
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(1 + ms * HZ / 1000);
-}
-
 #endif