Commit e21de1a8 authored by Ian Abbott's avatar Ian Abbott Committed by Greg Kroah-Hartman

Staging: comedi: pcl818: Tidy up AI command after channel dropout or similar error.

It was causing subsequent commands to fail with -EBUSY.

From: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarFrank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent a71f18d2
......@@ -820,6 +820,27 @@ static irqreturn_t interrupt_pcl818(int irq, void *d)
}
/* rt_printk("I\n"); */
if (devpriv->irq_blocked && devpriv->irq_was_now_closed) {
if ((devpriv->neverending_ai || (!devpriv->neverending_ai &&
devpriv->ai_act_scan > 0)) &&
(devpriv->ai_mode == INT_TYPE_AI1_DMA ||
devpriv->ai_mode == INT_TYPE_AI3_DMA)) {
/* The cleanup from ai_cancel() has been delayed
until now because the card doesn't seem to like
being reprogrammed while a DMA transfer is in
progress.
*/
struct comedi_subdevice *s = dev->subdevices + 0;
devpriv->ai_act_scan = 0;
devpriv->neverending_ai = 0;
pcl818_ai_cancel(dev, s);
}
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
return IRQ_HANDLED;
}
switch (devpriv->ai_mode) {
case INT_TYPE_AI1_DMA:
case INT_TYPE_AI3_DMA:
......@@ -843,25 +864,6 @@ static irqreturn_t interrupt_pcl818(int irq, void *d)
if ((!dev->irq) || (!devpriv->irq_free) || (!devpriv->irq_blocked)
|| (!devpriv->ai_mode)) {
if (devpriv->irq_was_now_closed) {
if (devpriv->neverending_ai &&
(devpriv->ai_mode == INT_TYPE_AI1_DMA
|| devpriv->ai_mode ==
INT_TYPE_AI3_DMA)) {
/* we had neverending ai but ai_cancel() has been called
the cleanup from ai_cancel() has been delayed until know
because the card doesn't seem to like being reprogrammed
while a DMA transfer is in progress
*/
struct comedi_subdevice *s = dev->subdevices + 0;
devpriv->ai_mode = devpriv->irq_was_now_closed;
devpriv->irq_was_now_closed = 0;
devpriv->neverending_ai = 0;
pcl818_ai_cancel(dev, s);
}
devpriv->irq_was_now_closed = 0;
return IRQ_HANDLED;
}
comedi_error(dev, "bad IRQ!");
return IRQ_NONE;
}
......@@ -1453,10 +1455,9 @@ static int pcl818_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
{
if (devpriv->irq_blocked > 0) {
rt_printk("pcl818_ai_cancel()\n");
devpriv->irq_was_now_closed = devpriv->ai_mode;
devpriv->ai_mode = 0;
devpriv->irq_was_now_closed = 1;
switch (devpriv->irq_was_now_closed) {
switch (devpriv->ai_mode) {
#ifdef unused
case INT_TYPE_AI1_DMA_RTC:
case INT_TYPE_AI3_DMA_RTC:
......@@ -1465,7 +1466,9 @@ static int pcl818_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
#endif
case INT_TYPE_AI1_DMA:
case INT_TYPE_AI3_DMA:
if (devpriv->neverending_ai) {
if (devpriv->neverending_ai ||
(!devpriv->neverending_ai &&
devpriv->ai_act_scan > 0)) {
/* wait for running dma transfer to end, do cleanup in interrupt */
goto end;
}
......@@ -1494,6 +1497,8 @@ static int pcl818_ai_cancel(struct comedi_device * dev, struct comedi_subdevice
devpriv->irq_blocked = 0;
devpriv->last_int_sub = s;
devpriv->neverending_ai = 0;
devpriv->ai_mode = 0;
devpriv->irq_was_now_closed = 0;
break;
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment