Commit e2f3d75f authored by Tejun Heo's avatar Tejun Heo Committed by Jeff Garzik

libata: skip EH autopsy and recovery during suspend

For some mysterious reason, certain hardware reacts badly to usual EH
actions while the system is going for suspend.  As the devices won't
be needed until the system is resumed, ask EH to skip usual autopsy
and recovery and proceed directly to suspend.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Tested-by: default avatarStephan Diestelhorst <stephan.diestelhorst@amd.com>
Cc: stable@kernel.org
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 992b3fb9
......@@ -5418,6 +5418,7 @@ static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
*/
int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
{
unsigned int ehi_flags = ATA_EHI_QUIET;
int rc;
/*
......@@ -5426,7 +5427,18 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
*/
ata_lpm_enable(host);
rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
/*
* On some hardware, device fails to respond after spun down
* for suspend. As the device won't be used before being
* resumed, we don't need to touch the device. Ask EH to skip
* the usual stuff and proceed directly to suspend.
*
* http://thread.gmane.org/gmane.linux.ide/46764
*/
if (mesg.event == PM_EVENT_SUSPEND)
ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY;
rc = ata_host_request_pm(host, mesg, 0, ehi_flags, 1);
if (rc == 0)
host->dev->power.power_state = mesg;
return rc;
......
......@@ -3235,6 +3235,10 @@ static int ata_eh_skip_recovery(struct ata_link *link)
if (link->flags & ATA_LFLAG_DISABLED)
return 1;
/* skip if explicitly requested */
if (ehc->i.flags & ATA_EHI_NO_RECOVERY)
return 1;
/* thaw frozen port and recover failed devices */
if ((ap->pflags & ATA_PFLAG_FROZEN) || ata_link_nr_enabled(link))
return 0;
......
......@@ -335,6 +335,7 @@ enum {
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */
ATA_EHI_QUIET = (1 << 3), /* be quiet */
ATA_EHI_NO_RECOVERY = (1 << 4), /* no recovery */
ATA_EHI_DID_SOFTRESET = (1 << 16), /* already soft-reset this port */
ATA_EHI_DID_HARDRESET = (1 << 17), /* already soft-reset this port */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment