scsi: qla2xxx: Fix premature hw access after PCI error

After a recoverable PCI error has been detected and recovered, qla driver
needs to check to see if the error condition still persist and/or wait
for the OS to give the resume signal.

Sep  8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440
qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx]
Sep  8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60
[qla2xxx]
Sep  8 22:26:03 localhost kernel: Call Trace:
Sep  8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx]
Sep  8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160
[qla2xxx]
Sep  8 22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx]
Sep  8 22:26:03 localhost kernel: ? qla2xxx_pci_mmio_enabled+0xfb/0x120
[qla2xxx]
Sep  8 22:26:03 localhost kernel: ? report_mmio_enabled+0x44/0x80
Sep  8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80
Sep  8 22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90
Sep  8 22:26:03 localhost kernel: ? aer_dev_correctable_show+0xc0/0xc0
Sep  8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240
Sep  8 22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0
Sep  8 22:26:03 localhost kernel: ? process_one_work+0x1a7/0x360
..
Sep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected PCI
disconnect.
Sep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22:
qla27xx_fwdt_entry_t262: dump ram MB failed. Area 5h start 198013h end 198013h
Sep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: Unable to
capture FW dump
Sep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0,
waited 5221 msecs
Sep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-680d:22: mmio
enabled returning.
Sep  8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-d04c:22: MBX
Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5
mb[0-3]=[0xffff 0xffff 0xffff 0xffff]

Link: https://lore.kernel.org/r/20220110050218.3958-6-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/qla2xxx/qla_os.c

@@ -7639,7 +7639,7 @@ qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
 
 	switch (state) {
 	case pci_channel_io_normal:
-		ha->flags.eeh_busy = 0;
+		qla_pci_set_eeh_busy(vha);
 		if (ql2xmqsupport || ql2xnvmeenable) {
 			set_bit(QPAIR_ONLINE_CHECK_NEEDED, &vha->dpc_flags);
 			qla2xxx_wake_dpc(vha);
@@ -7680,9 +7680,16 @@ qla2xxx_pci_mmio_enabled(struct pci_dev *pdev)
 	       "mmio enabled\n");
 
 	ha->pci_error_state = QLA_PCI_MMIO_ENABLED;
+
 	if (IS_QLA82XX(ha))
 		return PCI_ERS_RESULT_RECOVERED;
 
+	if (qla2x00_isp_reg_stat(ha)) {
+		ql_log(ql_log_info, base_vha, 0x803f,
+		    "During mmio enabled, PCI/Register disconnect still detected.\n");
+		goto out;
+	}
+
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	if (IS_QLA2100(ha) || IS_QLA2200(ha)){
 		stat = rd_reg_word(&reg->hccr);
@@ -7704,6 +7711,7 @@ qla2xxx_pci_mmio_enabled(struct pci_dev *pdev)
 		    "RISC paused -- mmio_enabled, Dumping firmware.\n");
 		qla2xxx_dump_fw(base_vha);
 	}
+out:
 	/* set PCI_ERS_RESULT_NEED_RESET to trigger call to qla2xxx_pci_slot_reset */
 	ql_dbg(ql_dbg_aer, base_vha, 0x600d,
 	       "mmio enabled returning.\n");

drivers/scsi/qla2xxx/qla_tmpl.c

@@ -435,8 +435,13 @@ qla27xx_fwdt_entry_t266(struct scsi_qla_host *vha,
 {
 	ql_dbg(ql_dbg_misc, vha, 0xd20a,
 	    "%s: reset risc [%lx]\n", __func__, *len);
-	if (buf)
-		WARN_ON_ONCE(qla24xx_soft_reset(vha->hw) != QLA_SUCCESS);
+	if (buf) {
+		if (qla24xx_soft_reset(vha->hw) != QLA_SUCCESS) {
+			ql_dbg(ql_dbg_async, vha, 0x5001,
+			    "%s: unable to soft reset\n", __func__);
+			return INVALID_ENTRY;
+		}
+	}
 
 	return qla27xx_next_entry(ent);
 }