ARM: dts: rockchip: enable gmac on RK3288 evb board

enable gmac in rk3288-evb-rk808.dts

changes since v2:
1. add fixed regulator for PHY
2. remove power-gpio, reset-gpio, phyirq-gpio, pmu_regulator setting
3. add "snps,reset-gpio", "snps,reset-active-low;" "snps,reset-delays-us"
Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/arm/boot/dts/rk3288-evb-rk808.dts

@@ -15,6 +15,13 @@
 
 / {
 	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
 };
 
 &cpu0 {
@@ -152,3 +159,19 @@ vcc_lcd: SWITCH_REG2 {
 		};
 	};
 };
+
+&gmac {
+	phy_regulator = "vcc_phy";
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};

arch/arm/boot/dts/rk3288-evb.dtsi

@@ -90,6 +90,17 @@ vcc_host: vcc-host-regulator {
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_pwr>;
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &emmc {
@@ -178,6 +189,12 @@ host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	eth_phy {
+		eth_phy_pwr: eth-phy-pwr {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &usb_host0_ehci {