Commit e3ab6013 authored by Tero Kristo's avatar Tero Kristo Committed by Paul Walmsley

ARM: OMAP3: clock: add support for dpll4_set_rate_and_parent

Expand the support of omap4 per-dpll to provide set_rate_and_parent.
This is required for proper behavior of clk_change_rate with
determine_rate support.
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
parent 83501ff0
......@@ -38,6 +38,18 @@
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
/**
* omap3_dpll4_set_rate - set rate for omap3 per-dpll
* @hw: clock to change
* @rate: target rate for clock
* @parent_rate: rate of the parent clock
*
* Check if the current SoC supports the per-dpll reprogram operation
* or not, and then do the rate change if supported. Returns -EINVAL
* if not supported, 0 for success, and potential error codes from the
* clock rate change.
*/
int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
......@@ -54,6 +66,30 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
}
/**
* omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
* @hw: clock to change
* @rate: target rate for clock
* @parent_rate: rate of the parent clock
* @index: parent index, 0 - reference clock, 1 - bypass clock
*
* Check if the current SoC support the per-dpll reprogram operation
* or not, and then do the rate + parent change if supported. Returns
* -EINVAL if not supported, 0 for success, and potential error codes
* from the clock rate change.
*/
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index)
{
if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
index);
}
void __init omap3_clk_lock_dpll5(void)
{
struct clk *dpll5_clk;
......
......@@ -291,6 +291,8 @@ int omap2_clk_disable_autoidle_all(void);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index);
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment