Commit e3b5fde7 authored by Haim Daniel's avatar Haim Daniel Committed by Greg Kroah-Hartman

drivers/staging: refactor dgnc tty registration.

-remove duplicate tty allocation code for serial and printer drivers.
-add missing tty c_ispeed and c_ospeed initialization to 9600.
-fix sparse warning: too long initializer-string for array of char.

This patch was only unit tested due to lack of the actual hardware.
Signed-off-by: default avatarHaim Daniel <haimdaniel@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 052181bb
......@@ -52,19 +52,6 @@
#define dgnc_jiffies_from_ms(a) (((a) * HZ) / 1000)
/*
* Define a local default termios struct. All ports will be created
* with this termios initially. This is the same structure that is defined
* as the default in tty_io.c with the same settings overridden as in serial.c
*
* In short, this should match the internal serial ports' defaults.
*/
#define DEFAULT_IFLAGS (ICRNL | IXON)
#define DEFAULT_OFLAGS (OPOST | ONLCR)
#define DEFAULT_CFLAGS (B9600 | CS8 | CREAD | HUPCL | CLOCAL)
#define DEFAULT_LFLAGS (ISIG | ICANON | ECHO | ECHOE | ECHOK | \
ECHOCTL | ECHOKE | IEXTEN)
#ifndef _POSIX_VDISABLE
#define _POSIX_VDISABLE '\0'
#endif
......
......@@ -51,22 +51,6 @@ static const struct digi_t dgnc_digi_init = {
.digi_term = "ansi" /* default terminal type */
};
/*
* Define a local default termios struct. All ports will be created
* with this termios initially.
*
* This defines a raw port at 9600 baud, 8 data bits, no parity,
* 1 stop bit.
*/
static const struct ktermios default_termios = {
.c_iflag = (DEFAULT_IFLAGS),
.c_oflag = (DEFAULT_OFLAGS),
.c_cflag = (DEFAULT_CFLAGS),
.c_lflag = (DEFAULT_LFLAGS),
.c_cc = INIT_C_CC,
.c_line = 0,
};
static int dgnc_tty_open(struct tty_struct *tty, struct file *file);
static void dgnc_tty_close(struct tty_struct *tty, struct file *file);
static int dgnc_block_til_ready(struct tty_struct *tty, struct file *file,
......@@ -129,6 +113,49 @@ static const struct tty_operations dgnc_tty_ops = {
/* TTY Initialization/Cleanup Functions */
static struct tty_driver *dgnc_tty_create(char *serial_name, uint maxports,
int major, int minor)
{
int rc;
struct tty_driver *drv;
drv = tty_alloc_driver(maxports,
TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV |
TTY_DRIVER_HARDWARE_BREAK);
if (IS_ERR(drv))
return drv;
drv->name = serial_name;
drv->name_base = 0;
drv->major = major;
drv->minor_start = minor;
drv->type = TTY_DRIVER_TYPE_SERIAL;
drv->subtype = SERIAL_TYPE_NORMAL;
drv->init_termios = tty_std_termios;
drv->init_termios.c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL);
drv->init_termios.c_ispeed = 9600;
drv->init_termios.c_ospeed = 9600;
drv->driver_name = DRVSTR;
/*
* Entry points for driver. Called by the kernel from
* tty_io.c and n_tty.c.
*/
tty_set_operations(drv, &dgnc_tty_ops);
rc = tty_register_driver(drv);
if (rc < 0) {
put_tty_driver(drv);
return ERR_PTR(rc);
}
return drv;
}
static void dgnc_tty_free(struct tty_driver *drv)
{
tty_unregister_driver(drv);
put_tty_driver(drv);
}
/**
* dgnc_tty_register() - Init the tty subsystem for this board.
*/
......@@ -136,95 +163,36 @@ int dgnc_tty_register(struct dgnc_board *brd)
{
int rc;
brd->serial_driver = tty_alloc_driver(brd->maxports,
TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV |
TTY_DRIVER_HARDWARE_BREAK);
if (IS_ERR(brd->serial_driver))
return PTR_ERR(brd->serial_driver);
snprintf(brd->serial_name, MAXTTYNAMELEN, "tty_dgnc_%d_",
brd->boardnum);
brd->serial_driver->name = brd->serial_name;
brd->serial_driver->name_base = 0;
brd->serial_driver->major = 0;
brd->serial_driver->minor_start = 0;
brd->serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
brd->serial_driver->subtype = SERIAL_TYPE_NORMAL;
brd->serial_driver->init_termios = default_termios;
brd->serial_driver->driver_name = DRVSTR;
/*
* Entry points for driver. Called by the kernel from
* tty_io.c and n_tty.c.
*/
tty_set_operations(brd->serial_driver, &dgnc_tty_ops);
rc = tty_register_driver(brd->serial_driver);
if (rc < 0) {
dev_dbg(&brd->pdev->dev,
"Can't register tty device (%d)\n", rc);
goto free_serial_driver;
brd->serial_driver = dgnc_tty_create(brd->serial_name,
brd->maxports, 0, 0);
if (IS_ERR(brd->serial_driver)) {
rc = PTR_ERR(brd->serial_driver);
dev_dbg(&brd->pdev->dev, "Can't register tty device (%d)\n",
rc);
return rc;
}
/*
* If we're doing transparent print, we have to do all of the above
* again, separately so we don't get the LD confused about what major
* we are when we get into the dgnc_tty_open() routine.
*/
brd->print_driver = tty_alloc_driver(brd->maxports,
TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV |
TTY_DRIVER_HARDWARE_BREAK);
snprintf(brd->print_name, MAXTTYNAMELEN, "pr_dgnc_%d_", brd->boardnum);
brd->print_driver = dgnc_tty_create(brd->print_name, brd->maxports,
0x80,
brd->serial_driver->major);
if (IS_ERR(brd->print_driver)) {
rc = PTR_ERR(brd->print_driver);
goto unregister_serial_driver;
}
snprintf(brd->print_name, MAXTTYNAMELEN, "pr_dgnc_%d_", brd->boardnum);
brd->print_driver->name = brd->print_name;
brd->print_driver->name_base = 0;
brd->print_driver->major = brd->serial_driver->major;
brd->print_driver->minor_start = 0x80;
brd->print_driver->type = TTY_DRIVER_TYPE_SERIAL;
brd->print_driver->subtype = SERIAL_TYPE_NORMAL;
brd->print_driver->init_termios = default_termios;
brd->print_driver->driver_name = DRVSTR;
/*
* Entry points for driver. Called by the kernel from
* tty_io.c and n_tty.c.
*/
tty_set_operations(brd->print_driver, &dgnc_tty_ops);
rc = tty_register_driver(brd->print_driver);
if (rc < 0) {
dev_dbg(&brd->pdev->dev,
"Can't register Transparent Print device(%d)\n",
rc);
goto free_print_driver;
"Can't register Transparent Print device(%d)\n", rc);
dgnc_tty_free(brd->serial_driver);
return rc;
}
return 0;
free_print_driver:
put_tty_driver(brd->print_driver);
unregister_serial_driver:
tty_unregister_driver(brd->serial_driver);
free_serial_driver:
put_tty_driver(brd->serial_driver);
return rc;
}
void dgnc_tty_unregister(struct dgnc_board *brd)
{
tty_unregister_driver(brd->print_driver);
tty_unregister_driver(brd->serial_driver);
put_tty_driver(brd->print_driver);
put_tty_driver(brd->serial_driver);
dgnc_tty_free(brd->print_driver);
dgnc_tty_free(brd->serial_driver);
}
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment