scsi: ufs: core: Perform read back after disabling interrupts

Currently, interrupts are cleared and disabled prior to registering the
interrupt. An mb() is used to complete the clear/disable writes before the
interrupt is registered.

mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure these bits hit the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.

Fixes: 199ef13c ("scsi: ufs: avoid spurious UFS host controller interrupts")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-8-181252004586@redhat.comSigned-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/ufs/core/ufshcd.c

@@ -10616,7 +10616,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	 * Make sure that UFS interrupts are disabled and any pending interrupt
 	 * status is cleared before registering UFS interrupt handler.
 	 */
-	mb();
+	ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
 
 	/* IRQ registration */
 	err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);