Commit e4b2eb13 authored by Dave Airlie's avatar Dave Airlie

Merge tag 'drm-misc-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for -rc2

- big pile of bridge driver (mostly tc358767), all handled by Archit
  and Andrez
- rockchip dsi fix
- atomic helper regression fix for spurious -EBUSY (Maarten)
- fix deferred fbdev fallout (Maarten)

* tag 'drm-misc-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc:
  drm/bridge: tc358767: fix 1-lane behavior
  drm/bridge: tc358767: fix AUXDATAn registers access
  drm/bridge: tc358767: fix timing calculations
  drm/bridge: tc358767: fix DP0_MISC register set
  drm/bridge: tc358767: filter out too high modes
  drm/bridge: tc358767: do no fail on hi-res displays
  drm/bridge: Fix lvds-encoder since the panel_bridge rework.
  drm/bridge: synopsys/dw-hdmi: Enable cec clock
  drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
  drm/fb_helper: Disable all crtc's when initial setup fails.
  drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
  drm/rockchip: dw-mipi-dsi: fix possible un-balanced runtime PM enable
parents 43f462f1 4dbd6c03
......@@ -372,9 +372,18 @@ struct adv7511 {
};
#ifdef CONFIG_DRM_I2C_ADV7511_CEC
int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
unsigned int offset);
int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511);
void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
#else
static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
{
unsigned int offset = adv7511->type == ADV7533 ?
ADV7533_REG_CEC_OFFSET : 0;
regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
ADV7511_CEC_CTRL_POWER_DOWN);
return 0;
}
#endif
#ifdef CONFIG_DRM_I2C_ADV7533
......
......@@ -300,18 +300,21 @@ static int adv7511_cec_parse_dt(struct device *dev, struct adv7511 *adv7511)
return 0;
}
int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
unsigned int offset)
int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
{
unsigned int offset = adv7511->type == ADV7533 ?
ADV7533_REG_CEC_OFFSET : 0;
int ret = adv7511_cec_parse_dt(dev, adv7511);
if (ret)
return ret;
goto err_cec_parse_dt;
adv7511->cec_adap = cec_allocate_adapter(&adv7511_cec_adap_ops,
adv7511, dev_name(dev), CEC_CAP_DEFAULTS, ADV7511_MAX_ADDRS);
if (IS_ERR(adv7511->cec_adap))
return PTR_ERR(adv7511->cec_adap);
if (IS_ERR(adv7511->cec_adap)) {
ret = PTR_ERR(adv7511->cec_adap);
goto err_cec_alloc;
}
regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset, 0);
/* cec soft reset */
......@@ -329,9 +332,18 @@ int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
((adv7511->cec_clk_freq / 750000) - 1) << 2);
ret = cec_register_adapter(adv7511->cec_adap, dev);
if (ret) {
cec_delete_adapter(adv7511->cec_adap);
adv7511->cec_adap = NULL;
}
return ret;
if (ret)
goto err_cec_register;
return 0;
err_cec_register:
cec_delete_adapter(adv7511->cec_adap);
adv7511->cec_adap = NULL;
err_cec_alloc:
dev_info(dev, "Initializing CEC failed with error %d, disabling CEC\n",
ret);
err_cec_parse_dt:
regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
ADV7511_CEC_CTRL_POWER_DOWN);
return ret == -EPROBE_DEFER ? ret : 0;
}
......@@ -1084,7 +1084,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
struct device *dev = &i2c->dev;
unsigned int main_i2c_addr = i2c->addr << 1;
unsigned int edid_i2c_addr = main_i2c_addr + 4;
unsigned int offset;
unsigned int val;
int ret;
......@@ -1192,24 +1191,16 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
if (adv7511->type == ADV7511)
adv7511_set_link_config(adv7511, &link_config);
ret = adv7511_cec_init(dev, adv7511);
if (ret)
goto err_unregister_cec;
adv7511->bridge.funcs = &adv7511_bridge_funcs;
adv7511->bridge.of_node = dev->of_node;
drm_bridge_add(&adv7511->bridge);
adv7511_audio_init(dev, adv7511);
offset = adv7511->type == ADV7533 ? ADV7533_REG_CEC_OFFSET : 0;
#ifdef CONFIG_DRM_I2C_ADV7511_CEC
ret = adv7511_cec_init(dev, adv7511, offset);
if (ret)
goto err_unregister_cec;
#else
regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
ADV7511_CEC_CTRL_POWER_DOWN);
#endif
return 0;
err_unregister_cec:
......
......@@ -13,13 +13,37 @@
#include <linux/of_graph.h>
struct lvds_encoder {
struct drm_bridge bridge;
struct drm_bridge *panel_bridge;
};
static int lvds_encoder_attach(struct drm_bridge *bridge)
{
struct lvds_encoder *lvds_encoder = container_of(bridge,
struct lvds_encoder,
bridge);
return drm_bridge_attach(bridge->encoder, lvds_encoder->panel_bridge,
bridge);
}
static struct drm_bridge_funcs funcs = {
.attach = lvds_encoder_attach,
};
static int lvds_encoder_probe(struct platform_device *pdev)
{
struct device_node *port;
struct device_node *endpoint;
struct device_node *panel_node;
struct drm_panel *panel;
struct drm_bridge *bridge;
struct lvds_encoder *lvds_encoder;
lvds_encoder = devm_kzalloc(&pdev->dev, sizeof(*lvds_encoder),
GFP_KERNEL);
if (!lvds_encoder)
return -ENOMEM;
/* Locate the panel DT node. */
port = of_graph_get_port_by_id(pdev->dev.of_node, 1);
......@@ -49,20 +73,30 @@ static int lvds_encoder_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
bridge = drm_panel_bridge_add(panel, DRM_MODE_CONNECTOR_LVDS);
if (IS_ERR(bridge))
return PTR_ERR(bridge);
lvds_encoder->panel_bridge =
devm_drm_panel_bridge_add(&pdev->dev,
panel, DRM_MODE_CONNECTOR_LVDS);
if (IS_ERR(lvds_encoder->panel_bridge))
return PTR_ERR(lvds_encoder->panel_bridge);
/* The panel_bridge bridge is attached to the panel's of_node,
* but we need a bridge attached to our of_node for our user
* to look up.
*/
lvds_encoder->bridge.of_node = pdev->dev.of_node;
lvds_encoder->bridge.funcs = &funcs;
drm_bridge_add(&lvds_encoder->bridge);
platform_set_drvdata(pdev, bridge);
platform_set_drvdata(pdev, lvds_encoder);
return 0;
}
static int lvds_encoder_remove(struct platform_device *pdev)
{
struct drm_bridge *bridge = platform_get_drvdata(pdev);
struct lvds_encoder *lvds_encoder = platform_get_drvdata(pdev);
drm_bridge_remove(bridge);
drm_bridge_remove(&lvds_encoder->bridge);
return 0;
}
......
......@@ -138,6 +138,7 @@ struct dw_hdmi {
struct device *dev;
struct clk *isfr_clk;
struct clk *iahb_clk;
struct clk *cec_clk;
struct dw_hdmi_i2c *i2c;
struct hdmi_data_info hdmi_data;
......@@ -2382,6 +2383,26 @@ __dw_hdmi_probe(struct platform_device *pdev,
goto err_isfr;
}
hdmi->cec_clk = devm_clk_get(hdmi->dev, "cec");
if (PTR_ERR(hdmi->cec_clk) == -ENOENT) {
hdmi->cec_clk = NULL;
} else if (IS_ERR(hdmi->cec_clk)) {
ret = PTR_ERR(hdmi->cec_clk);
if (ret != -EPROBE_DEFER)
dev_err(hdmi->dev, "Cannot get HDMI cec clock: %d\n",
ret);
hdmi->cec_clk = NULL;
goto err_iahb;
} else {
ret = clk_prepare_enable(hdmi->cec_clk);
if (ret) {
dev_err(hdmi->dev, "Cannot enable HDMI cec clock: %d\n",
ret);
goto err_iahb;
}
}
/* Product and revision IDs */
hdmi->version = (hdmi_readb(hdmi, HDMI_DESIGN_ID) << 8)
| (hdmi_readb(hdmi, HDMI_REVISION_ID) << 0);
......@@ -2518,6 +2539,8 @@ __dw_hdmi_probe(struct platform_device *pdev,
cec_notifier_put(hdmi->cec_notifier);
clk_disable_unprepare(hdmi->iahb_clk);
if (hdmi->cec_clk)
clk_disable_unprepare(hdmi->cec_clk);
err_isfr:
clk_disable_unprepare(hdmi->isfr_clk);
err_res:
......@@ -2541,6 +2564,8 @@ static void __dw_hdmi_remove(struct dw_hdmi *hdmi)
clk_disable_unprepare(hdmi->iahb_clk);
clk_disable_unprepare(hdmi->isfr_clk);
if (hdmi->cec_clk)
clk_disable_unprepare(hdmi->cec_clk);
if (hdmi->i2c)
i2c_del_adapter(&hdmi->i2c->adap);
......
......@@ -97,7 +97,7 @@
#define DP0_ACTIVEVAL 0x0650
#define DP0_SYNCVAL 0x0654
#define DP0_MISC 0x0658
#define TU_SIZE_RECOMMENDED (0x3f << 16) /* LSCLK cycles per TU */
#define TU_SIZE_RECOMMENDED (63) /* LSCLK cycles per TU */
#define BPC_6 (0 << 5)
#define BPC_8 (1 << 5)
......@@ -318,7 +318,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
tmp = (tmp << 8) | buf[i];
i++;
if (((i % 4) == 0) || (i == size)) {
tc_write(DP0_AUXWDATA(i >> 2), tmp);
tc_write(DP0_AUXWDATA((i - 1) >> 2), tmp);
tmp = 0;
}
}
......@@ -603,8 +603,15 @@ static int tc_get_display_props(struct tc_data *tc)
ret = drm_dp_link_probe(&tc->aux, &tc->link.base);
if (ret < 0)
goto err_dpcd_read;
if ((tc->link.base.rate != 162000) && (tc->link.base.rate != 270000))
goto err_dpcd_inval;
if (tc->link.base.rate != 162000 && tc->link.base.rate != 270000) {
dev_dbg(tc->dev, "Falling to 2.7 Gbps rate\n");
tc->link.base.rate = 270000;
}
if (tc->link.base.num_lanes > 2) {
dev_dbg(tc->dev, "Falling to 2 lanes\n");
tc->link.base.num_lanes = 2;
}
ret = drm_dp_dpcd_readb(&tc->aux, DP_MAX_DOWNSPREAD, tmp);
if (ret < 0)
......@@ -637,9 +644,6 @@ static int tc_get_display_props(struct tc_data *tc)
err_dpcd_read:
dev_err(tc->dev, "failed to read DPCD: %d\n", ret);
return ret;
err_dpcd_inval:
dev_err(tc->dev, "invalid DPCD\n");
return -EINVAL;
}
static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
......@@ -655,6 +659,14 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
int lower_margin = mode->vsync_start - mode->vdisplay;
int vsync_len = mode->vsync_end - mode->vsync_start;
/*
* Recommended maximum number of symbols transferred in a transfer unit:
* DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
* (output active video bandwidth in bytes))
* Must be less than tu_size.
*/
max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
dev_dbg(tc->dev, "set mode %dx%d\n",
mode->hdisplay, mode->vdisplay);
dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
......@@ -664,13 +676,18 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
/* LCD Ctl Frame Size */
tc_write(VPCTRL0, (0x40 << 20) /* VSDELAY */ |
/*
* LCD Ctl Frame Size
* datasheet is not clear of vsdelay in case of DPI
* assume we do not need any delay when DPI is a source of
* sync signals
*/
tc_write(VPCTRL0, (0 << 20) /* VSDELAY */ |
OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
tc_write(HTIM01, (left_margin << 16) | /* H back porch */
(hsync_len << 0)); /* Hsync */
tc_write(HTIM02, (right_margin << 16) | /* H front porch */
(mode->hdisplay << 0)); /* width */
tc_write(HTIM01, (ALIGN(left_margin, 2) << 16) | /* H back porch */
(ALIGN(hsync_len, 2) << 0)); /* Hsync */
tc_write(HTIM02, (ALIGN(right_margin, 2) << 16) | /* H front porch */
(ALIGN(mode->hdisplay, 2) << 0)); /* width */
tc_write(VTIM01, (upper_margin << 16) | /* V back porch */
(vsync_len << 0)); /* Vsync */
tc_write(VTIM02, (lower_margin << 16) | /* V front porch */
......@@ -689,7 +706,7 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
/* DP Main Stream Attributes */
vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
tc_write(DP0_VIDSYNCDELAY,
(0x003e << 16) | /* thresh_dly */
(max_tu_symbol << 16) | /* thresh_dly */
(vid_sync_dly << 0));
tc_write(DP0_TOTALVAL, (mode->vtotal << 16) | (mode->htotal));
......@@ -705,14 +722,8 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
/*
* Recommended maximum number of symbols transferred in a transfer unit:
* DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
* (output active video bandwidth in bytes))
* Must be less than tu_size.
*/
max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
tc_write(DP0_MISC, (max_tu_symbol << 23) | TU_SIZE_RECOMMENDED | BPC_8);
tc_write(DP0_MISC, (max_tu_symbol << 23) | (TU_SIZE_RECOMMENDED << 16) |
BPC_8);
return 0;
err:
......@@ -808,8 +819,6 @@ static int tc_main_link_setup(struct tc_data *tc)
unsigned int rate;
u32 dp_phy_ctrl;
int timeout;
bool aligned;
bool ready;
u32 value;
int ret;
u8 tmp[8];
......@@ -954,16 +963,15 @@ static int tc_main_link_setup(struct tc_data *tc)
ret = drm_dp_dpcd_read_link_status(aux, tmp + 2);
if (ret < 0)
goto err_dpcd_read;
ready = (tmp[2] == ((DP_CHANNEL_EQ_BITS << 4) | /* Lane1 */
DP_CHANNEL_EQ_BITS)); /* Lane0 */
aligned = tmp[4] & DP_INTERLANE_ALIGN_DONE;
} while ((--timeout) && !(ready && aligned));
} while ((--timeout) &&
!(drm_dp_channel_eq_ok(tmp + 2, tc->link.base.num_lanes)));
if (timeout == 0) {
/* Read DPCD 0x200-0x201 */
ret = drm_dp_dpcd_read(aux, DP_SINK_COUNT, tmp, 2);
if (ret < 0)
goto err_dpcd_read;
dev_err(dev, "channel(s) EQ not ok\n");
dev_info(dev, "0x0200 SINK_COUNT: 0x%02x\n", tmp[0]);
dev_info(dev, "0x0201 DEVICE_SERVICE_IRQ_VECTOR: 0x%02x\n",
tmp[1]);
......@@ -974,10 +982,6 @@ static int tc_main_link_setup(struct tc_data *tc)
dev_info(dev, "0x0206 ADJUST_REQUEST_LANE0_1: 0x%02x\n",
tmp[6]);
if (!ready)
dev_err(dev, "Lane0/1 not ready\n");
if (!aligned)
dev_err(dev, "Lane0/1 not aligned\n");
return -EAGAIN;
}
......@@ -1099,7 +1103,10 @@ static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
static int tc_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
/* Accept any mode */
/* DPI interface clock limitation: upto 154 MHz */
if (mode->clock > 154000)
return MODE_CLOCK_HIGH;
return MODE_OK;
}
......
......@@ -1225,7 +1225,7 @@ drm_atomic_helper_wait_for_vblanks(struct drm_device *dev,
return;
for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
if (!new_crtc_state->active || !new_crtc_state->planes_changed)
if (!new_crtc_state->active)
continue;
ret = drm_crtc_vblank_get(crtc);
......
......@@ -1809,6 +1809,10 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
if (crtc_count == 0 || sizes.fb_width == -1 || sizes.fb_height == -1) {
DRM_INFO("Cannot find any crtc or sizes\n");
/* First time: disable all crtc's.. */
if (!fb_helper->deferred_setup && !READ_ONCE(fb_helper->dev->master))
restore_fbdev_mode(fb_helper);
return -EAGAIN;
}
......
......@@ -1285,8 +1285,6 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
goto err_pllref;
}
pm_runtime_enable(dev);
dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
dsi->dsi_host.dev = dev;
ret = mipi_dsi_host_register(&dsi->dsi_host);
......@@ -1301,6 +1299,7 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
}
dev_set_drvdata(dev, dsi);
pm_runtime_enable(dev);
return 0;
err_mipi_dsi_host:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment