mfd: arizona: Mark additional registers as volatile

Mark some additional registers as volatile. The write sequencer control
registers should not be cached, as we don't ever want their value
synchronised as this might cause a write sequence to be accidentally
initiated.

Additionally, the DAC_COMP registers require special preconditions to
write so there values wouldn't be updated accurately during a register
sync.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/wm5102-tables.c

@@ -246,9 +246,6 @@ const struct regmap_irq_chip wm5102_irq = {
 static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000008, 0x0019 },   /* R8     - Ctrl IF SPI CFG 1 */ 
 	{ 0x00000009, 0x0001 },   /* R9     - Ctrl IF I2C1 CFG 1 */ 
-	{ 0x00000016, 0x0000 },   /* R22    - Write Sequencer Ctrl 0 */ 
-	{ 0x00000017, 0x0000 },   /* R23    - Write Sequencer Ctrl 1 */ 
-	{ 0x00000018, 0x0000 },   /* R24    - Write Sequencer Ctrl 2 */ 
 	{ 0x00000020, 0x0000 },   /* R32    - Tone Generator 1 */ 
 	{ 0x00000021, 0x1000 },   /* R33    - Tone Generator 2 */ 
 	{ 0x00000022, 0x0000 },   /* R34    - Tone Generator 3 */ 
@@ -1882,6 +1879,10 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
 	switch (reg) {
 	case ARIZONA_SOFTWARE_RESET:
 	case ARIZONA_DEVICE_REVISION:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_0:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_1:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_2:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_3:
 	case ARIZONA_OUTPUT_STATUS_1:
 	case ARIZONA_RAW_OUTPUT_STATUS_1:
 	case ARIZONA_SLIMBUS_RX_PORT_STATUS:
@@ -1893,6 +1894,10 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
 	case ARIZONA_FLL1_NCO_TEST_0:
 	case ARIZONA_FLL2_NCO_TEST_0:
+	case ARIZONA_DAC_COMP_1:
+	case ARIZONA_DAC_COMP_2:
+	case ARIZONA_DAC_COMP_3:
+	case ARIZONA_DAC_COMP_4:
 	case ARIZONA_FX_CTRL2:
 	case ARIZONA_INTERRUPT_STATUS_1:
 	case ARIZONA_INTERRUPT_STATUS_2:

drivers/mfd/wm5110-tables.c

@@ -666,9 +666,6 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x0000000A, 0x0001 },    /* R10    - Ctrl IF I2C2 CFG 1 */
 	{ 0x0000000B, 0x0036 },    /* R11    - Ctrl IF I2C1 CFG 2 */
 	{ 0x0000000C, 0x0036 },    /* R12    - Ctrl IF I2C2 CFG 2 */
-	{ 0x00000016, 0x0000 },    /* R22    - Write Sequencer Ctrl 0 */
-	{ 0x00000017, 0x0000 },    /* R23    - Write Sequencer Ctrl 1 */
-	{ 0x00000018, 0x0000 },    /* R24    - Write Sequencer Ctrl 2 */
 	{ 0x00000020, 0x0000 },    /* R32    - Tone Generator 1 */
 	{ 0x00000021, 0x1000 },    /* R33    - Tone Generator 2 */
 	{ 0x00000022, 0x0000 },    /* R34    - Tone Generator 3 */
@@ -2815,6 +2812,9 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
 	switch (reg) {
 	case ARIZONA_SOFTWARE_RESET:
 	case ARIZONA_DEVICE_REVISION:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_0:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_1:
+	case ARIZONA_WRITE_SEQUENCER_CTRL_2:
 	case ARIZONA_HAPTICS_STATUS:
 	case ARIZONA_SAMPLE_RATE_1_STATUS:
 	case ARIZONA_SAMPLE_RATE_2_STATUS: