Commit e57c4a67 authored by NeilBrown's avatar NeilBrown Committed by Sebastian Reichel

twl4030_charger: use runtime_pm to keep usb phy active while charging.

The twl4030 usb phy needs to be active while we are using
the USB VBUS as a current source for charging.
In particular, the usb3v1 regulator must be enabled and the
PHY_PWR_PHYPWD bit must be set to keep the phy powered.

commit ab37813f
    twl4030_charger: Allow charger to control the regulator that feeds it

gave the charger control over the regulator, but didn't resolve
the PHY_PWR_PHYPWD issue.

Now that both of these are controlled by runtime_pm in
phy-twl4030-usb, we can simply take a runtime_pm reference to the USB
phy whenever the charger wants to use it as a current source.

So this patch reverts the above commit, and adds the necessary
runtime_pm calls.
Acked-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarNeilBrown <neil@brown.name>
Signed-off-by: default avatarSebastian Reichel <sre@kernel.org>
parent b5e57863
......@@ -788,9 +788,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
static struct regulator_consumer_supply usb1v8 = {
.supply = "usb1v8",
};
static struct regulator_consumer_supply usb3v1[] = {
{ .supply = "usb3v1" },
{ .supply = "bci3v1" },
static struct regulator_consumer_supply usb3v1 = {
.supply = "usb3v1",
};
/* First add the regulators so that they can be used by transceiver */
......@@ -818,7 +817,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
return PTR_ERR(child);
child = add_regulator_linked(TWL4030_REG_VUSB3V1,
&usb_fixed, usb3v1, 2,
&usb_fixed, &usb3v1, 1,
features);
if (IS_ERR(child))
return PTR_ERR(child);
......@@ -838,7 +837,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && child) {
usb1v5.dev_name = dev_name(child);
usb1v8.dev_name = dev_name(child);
usb3v1[0].dev_name = dev_name(child);
usb3v1.dev_name = dev_name(child);
}
}
......
......@@ -22,7 +22,6 @@
#include <linux/power_supply.h>
#include <linux/notifier.h>
#include <linux/usb/otg.h>
#include <linux/regulator/machine.h>
#define TWL4030_BCIMSTATEC 0x02
#define TWL4030_BCIICHG 0x08
......@@ -94,7 +93,6 @@ struct twl4030_bci {
struct work_struct work;
int irq_chg;
int irq_bci;
struct regulator *usb_reg;
int usb_enabled;
unsigned long event;
......@@ -208,7 +206,7 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
{
int ret;
if (enable) {
if (enable && !IS_ERR_OR_NULL(bci->transceiver)) {
/* Check for USB charger connected */
if (!twl4030_bci_have_vbus(bci))
return -ENODEV;
......@@ -222,14 +220,9 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
return -EACCES;
}
/* Need to keep regulator on */
/* Need to keep phy powered */
if (!bci->usb_enabled) {
ret = regulator_enable(bci->usb_reg);
if (ret) {
dev_err(bci->dev,
"Failed to enable regulator\n");
return ret;
}
pm_runtime_get_sync(bci->transceiver->dev);
bci->usb_enabled = 1;
}
......@@ -244,7 +237,8 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
} else {
ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0);
if (bci->usb_enabled) {
regulator_disable(bci->usb_reg);
pm_runtime_mark_last_busy(bci->transceiver->dev);
pm_runtime_put_autosuspend(bci->transceiver->dev);
bci->usb_enabled = 0;
}
}
......@@ -609,8 +603,6 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
return ret;
}
bci->usb_reg = regulator_get(bci->dev, "bci3v1");
bci->usb = devm_power_supply_register(&pdev->dev, &twl4030_bci_usb_desc,
NULL);
if (IS_ERR(bci->usb)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment