cpufreq: exynos: Use dev_err/info function instead of pr_err/info

This patch uses dev_err/info function to show accurate log message
with device name instead of pr_err/info function.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/cpufreq/exynos-cpufreq.c

@@ -48,6 +48,7 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 	struct cpufreq_policy *policy = cpufreq_cpu_get(0);
 	unsigned int arm_volt, safe_arm_volt = 0;
 	unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
+	struct device *dev = exynos_info->dev;
 	unsigned int old_freq;
 	int index, old_index;
 	int ret = 0;
@@ -89,8 +90,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 		/* Firstly, voltage up to increase frequency */
 		ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
 		if (ret) {
-			pr_err("%s: failed to set cpu voltage to %d\n",
-				__func__, arm_volt);
+			dev_err(dev, "failed to set cpu voltage to %d\n",
+				arm_volt);
 			return ret;
 		}
 	}
@@ -99,8 +100,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 		ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
 				      safe_arm_volt);
 		if (ret) {
-			pr_err("%s: failed to set cpu voltage to %d\n",
-				__func__, safe_arm_volt);
+			dev_err(dev, "failed to set cpu voltage to %d\n",
+				safe_arm_volt);
 			return ret;
 		}
 	}
@@ -114,8 +115,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 		ret = regulator_set_voltage(arm_regulator, arm_volt,
 				arm_volt);
 		if (ret) {
-			pr_err("%s: failed to set cpu voltage to %d\n",
-				__func__, arm_volt);
+			dev_err(dev, "failed to set cpu voltage to %d\n",
+				arm_volt);
 			goto out;
 		}
 	}
@@ -162,6 +163,8 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 	if (!exynos_info)
 		return -ENOMEM;
 
+	exynos_info->dev = &pdev->dev;
+
 	if (soc_is_exynos4210())
 		ret = exynos4210_cpufreq_init(exynos_info);
 	else if (soc_is_exynos4212() || soc_is_exynos4412())
@@ -175,13 +178,13 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 		goto err_vdd_arm;
 
 	if (exynos_info->set_freq == NULL) {
-		pr_err("%s: No set_freq function (ERR)\n", __func__);
+		dev_err(&pdev->dev, "No set_freq function (ERR)\n");
 		goto err_vdd_arm;
 	}
 
 	arm_regulator = regulator_get(NULL, "vdd_arm");
 	if (IS_ERR(arm_regulator)) {
-		pr_err("%s: failed to get resource vdd_arm\n", __func__);
+		dev_err(&pdev->dev, "failed to get resource vdd_arm\n");
 		goto err_vdd_arm;
 	}
 
@@ -191,7 +194,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 	if (!cpufreq_register_driver(&exynos_driver))
 		return 0;
 
-	pr_err("%s: failed to register cpufreq driver\n", __func__);
+	dev_err(&pdev->dev, "failed to register cpufreq driver\n");
 	regulator_put(arm_regulator);
 err_vdd_arm:
 	kfree(exynos_info);

drivers/cpufreq/exynos-cpufreq.h

@@ -34,6 +34,7 @@ struct apll_freq {
 };
 
 struct exynos_dvfs_info {
+	struct device	*dev;
 	unsigned long	mpll_freq_khz;
 	unsigned int	pll_safe_idx;
 	struct clk	*cpu_clk;