Commit e5f8efa5 authored by Alan Tull's avatar Alan Tull Committed by Greg Kroah-Hartman

ARM: socfpga: fpga bridge driver support

Supports Altera SOCFPGA bridges:
 * fpga2sdram
 * fpga2hps
 * hps2fpga
 * lwhps2fpga

Allows enabling/disabling the bridges through the FPGA
Bridge Framework API functions.

The fpga2sdram driver only supports enabling and disabling
of the ports that been configured early on.  This is due to
a hardware limitation where the read, write, and command
ports on the fpga2sdram bridge can only be reconfigured
while there are no transactions to the sdram, i.e. when
running out of OCRAM before the kernel boots.

Device tree property 'init-val' configures the driver to
enable or disable the bridge during probe.  If the property
does not exist, the driver will leave the bridge in its
current state.
Signed-off-by: default avatarAlan Tull <atull@opensource.altera.com>
Signed-off-by: default avatarMatthew Gerlach <mgerlach@altera.com>
Signed-off-by: default avatarDinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 0fa20cdf
......@@ -40,6 +40,13 @@ config FPGA_BRIDGE
Say Y here if you want to support bridges connected between host
processors and FPGAs or between FPGAs.
config SOCFPGA_FPGA_BRIDGE
tristate "Altera SoCFPGA FPGA Bridges"
depends on ARCH_SOCFPGA && FPGA_BRIDGE
help
Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
devices.
endif # FPGA
endmenu
......@@ -11,6 +11,7 @@ obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
# FPGA Bridge Drivers
obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o
# High Level Interfaces
obj-$(CONFIG_FPGA_REGION) += fpga-region.o
/*
* FPGA to SDRAM Bridge Driver for Altera SoCFPGA Devices
*
* Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* This driver manages a bridge between an FPGA and the SDRAM used by the ARM
* host processor system (HPS).
*
* The bridge contains 4 read ports, 4 write ports, and 6 command ports.
* Reconfiguring these ports requires that no SDRAM transactions occur during
* reconfiguration. The code reconfiguring the ports cannot run out of SDRAM
* nor can the FPGA access the SDRAM during reconfiguration. This driver does
* not support reconfiguring the ports. The ports are configured by code
* running out of on chip ram before Linux is started and the configuration
* is passed in a handoff register in the system manager.
*
* This driver supports enabling and disabling of the configured ports, which
* allows for safe reprogramming of the FPGA, assuming that the new FPGA image
* uses the same port configuration. Bridges must be disabled before
* reprogramming the FPGA and re-enabled after the FPGA has been programmed.
*/
#include <linux/fpga/fpga-bridge.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/regmap.h>
#define ALT_SDR_CTL_FPGAPORTRST_OFST 0x80
#define ALT_SDR_CTL_FPGAPORTRST_PORTRSTN_MSK 0x00003fff
#define ALT_SDR_CTL_FPGAPORTRST_RD_SHIFT 0
#define ALT_SDR_CTL_FPGAPORTRST_WR_SHIFT 4
#define ALT_SDR_CTL_FPGAPORTRST_CTRL_SHIFT 8
/*
* From the Cyclone V HPS Memory Map document:
* These registers are used to store handoff information between the
* preloader and the OS. These 8 registers can be used to store any
* information. The contents of these registers have no impact on
* the state of the HPS hardware.
*/
#define SYSMGR_ISWGRP_HANDOFF3 (0x8C)
#define F2S_BRIDGE_NAME "fpga2sdram"
struct alt_fpga2sdram_data {
struct device *dev;
struct regmap *sdrctl;
int mask;
};
static int alt_fpga2sdram_enable_show(struct fpga_bridge *bridge)
{
struct alt_fpga2sdram_data *priv = bridge->priv;
int value;
regmap_read(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST, &value);
return (value & priv->mask) == priv->mask;
}
static inline int _alt_fpga2sdram_enable_set(struct alt_fpga2sdram_data *priv,
bool enable)
{
return regmap_update_bits(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST,
priv->mask, enable ? priv->mask : 0);
}
static int alt_fpga2sdram_enable_set(struct fpga_bridge *bridge, bool enable)
{
return _alt_fpga2sdram_enable_set(bridge->priv, enable);
}
struct prop_map {
char *prop_name;
u32 *prop_value;
u32 prop_max;
};
static const struct fpga_bridge_ops altera_fpga2sdram_br_ops = {
.enable_set = alt_fpga2sdram_enable_set,
.enable_show = alt_fpga2sdram_enable_show,
};
static const struct of_device_id altera_fpga_of_match[] = {
{ .compatible = "altr,socfpga-fpga2sdram-bridge" },
{},
};
static int alt_fpga_bridge_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct alt_fpga2sdram_data *priv;
u32 enable;
struct regmap *sysmgr;
int ret = 0;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = dev;
priv->sdrctl = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
if (IS_ERR(priv->sdrctl)) {
dev_err(dev, "regmap for altr,sdr-ctl lookup failed.\n");
return PTR_ERR(priv->sdrctl);
}
sysmgr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
if (IS_ERR(priv->sdrctl)) {
dev_err(dev, "regmap for altr,sys-mgr lookup failed.\n");
return PTR_ERR(sysmgr);
}
/* Get f2s bridge configuration saved in handoff register */
regmap_read(sysmgr, SYSMGR_ISWGRP_HANDOFF3, &priv->mask);
ret = fpga_bridge_register(dev, F2S_BRIDGE_NAME,
&altera_fpga2sdram_br_ops, priv);
if (ret)
return ret;
dev_info(dev, "driver initialized with handoff %08x\n", priv->mask);
if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
if (enable > 1) {
dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
} else {
dev_info(dev, "%s bridge\n",
(enable ? "enabling" : "disabling"));
ret = _alt_fpga2sdram_enable_set(priv, enable);
if (ret) {
fpga_bridge_unregister(&pdev->dev);
return ret;
}
}
}
return ret;
}
static int alt_fpga_bridge_remove(struct platform_device *pdev)
{
fpga_bridge_unregister(&pdev->dev);
return 0;
}
MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
static struct platform_driver altera_fpga_driver = {
.probe = alt_fpga_bridge_probe,
.remove = alt_fpga_bridge_remove,
.driver = {
.name = "altera_fpga2sdram_bridge",
.of_match_table = of_match_ptr(altera_fpga_of_match),
},
};
module_platform_driver(altera_fpga_driver);
MODULE_DESCRIPTION("Altera SoCFPGA FPGA to SDRAM Bridge");
MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
MODULE_LICENSE("GPL v2");
/*
* FPGA to/from HPS Bridge Driver for Altera SoCFPGA Devices
*
* Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
*
* Includes this patch from the mailing list:
* fpga: altera-hps2fpga: fix HPS2FPGA bridge visibility to L3 masters
* Signed-off-by: Anatolij Gustschin <agust@denx.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* This driver manages bridges on a Altera SOCFPGA between the ARM host
* processor system (HPS) and the embedded FPGA.
*
* This driver supports enabling and disabling of the configured ports, which
* allows for safe reprogramming of the FPGA, assuming that the new FPGA image
* uses the same port configuration. Bridges must be disabled before
* reprogramming the FPGA and re-enabled after the FPGA has been programmed.
*/
#include <linux/clk.h>
#include <linux/fpga/fpga-bridge.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/spinlock.h>
#define ALT_L3_REMAP_OFST 0x0
#define ALT_L3_REMAP_MPUZERO_MSK 0x00000001
#define ALT_L3_REMAP_H2F_MSK 0x00000008
#define ALT_L3_REMAP_LWH2F_MSK 0x00000010
#define HPS2FPGA_BRIDGE_NAME "hps2fpga"
#define LWHPS2FPGA_BRIDGE_NAME "lwhps2fpga"
#define FPGA2HPS_BRIDGE_NAME "fpga2hps"
struct altera_hps2fpga_data {
const char *name;
struct reset_control *bridge_reset;
struct regmap *l3reg;
unsigned int remap_mask;
struct clk *clk;
};
static int alt_hps2fpga_enable_show(struct fpga_bridge *bridge)
{
struct altera_hps2fpga_data *priv = bridge->priv;
return reset_control_status(priv->bridge_reset);
}
/* The L3 REMAP register is write only, so keep a cached value. */
static unsigned int l3_remap_shadow;
static spinlock_t l3_remap_lock;
static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv,
bool enable)
{
unsigned long flags;
int ret;
/* bring bridge out of reset */
if (enable)
ret = reset_control_deassert(priv->bridge_reset);
else
ret = reset_control_assert(priv->bridge_reset);
if (ret)
return ret;
/* Allow bridge to be visible to L3 masters or not */
if (priv->remap_mask) {
spin_lock_irqsave(&l3_remap_lock, flags);
l3_remap_shadow |= ALT_L3_REMAP_MPUZERO_MSK;
if (enable)
l3_remap_shadow |= priv->remap_mask;
else
l3_remap_shadow &= ~priv->remap_mask;
ret = regmap_write(priv->l3reg, ALT_L3_REMAP_OFST,
l3_remap_shadow);
spin_unlock_irqrestore(&l3_remap_lock, flags);
}
return ret;
}
static int alt_hps2fpga_enable_set(struct fpga_bridge *bridge, bool enable)
{
return _alt_hps2fpga_enable_set(bridge->priv, enable);
}
static const struct fpga_bridge_ops altera_hps2fpga_br_ops = {
.enable_set = alt_hps2fpga_enable_set,
.enable_show = alt_hps2fpga_enable_show,
};
static struct altera_hps2fpga_data hps2fpga_data = {
.name = HPS2FPGA_BRIDGE_NAME,
.remap_mask = ALT_L3_REMAP_H2F_MSK,
};
static struct altera_hps2fpga_data lwhps2fpga_data = {
.name = LWHPS2FPGA_BRIDGE_NAME,
.remap_mask = ALT_L3_REMAP_LWH2F_MSK,
};
static struct altera_hps2fpga_data fpga2hps_data = {
.name = FPGA2HPS_BRIDGE_NAME,
};
static const struct of_device_id altera_fpga_of_match[] = {
{ .compatible = "altr,socfpga-hps2fpga-bridge",
.data = &hps2fpga_data },
{ .compatible = "altr,socfpga-lwhps2fpga-bridge",
.data = &lwhps2fpga_data },
{ .compatible = "altr,socfpga-fpga2hps-bridge",
.data = &fpga2hps_data },
{},
};
static int alt_fpga_bridge_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct altera_hps2fpga_data *priv;
const struct of_device_id *of_id;
u32 enable;
int ret;
of_id = of_match_device(altera_fpga_of_match, dev);
priv = (struct altera_hps2fpga_data *)of_id->data;
priv->bridge_reset = of_reset_control_get_by_index(dev->of_node, 0);
if (IS_ERR(priv->bridge_reset)) {
dev_err(dev, "Could not get %s reset control\n", priv->name);
return PTR_ERR(priv->bridge_reset);
}
if (priv->remap_mask) {
priv->l3reg = syscon_regmap_lookup_by_compatible("altr,l3regs");
if (IS_ERR(priv->l3reg)) {
dev_err(dev, "regmap for altr,l3regs lookup failed\n");
return PTR_ERR(priv->l3reg);
}
}
priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk)) {
dev_err(dev, "no clock specified\n");
return PTR_ERR(priv->clk);
}
ret = clk_prepare_enable(priv->clk);
if (ret) {
dev_err(dev, "could not enable clock\n");
return -EBUSY;
}
spin_lock_init(&l3_remap_lock);
if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
if (enable > 1) {
dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
} else {
dev_info(dev, "%s bridge\n",
(enable ? "enabling" : "disabling"));
ret = _alt_hps2fpga_enable_set(priv, enable);
if (ret) {
fpga_bridge_unregister(&pdev->dev);
return ret;
}
}
}
return fpga_bridge_register(dev, priv->name, &altera_hps2fpga_br_ops,
priv);
}
static int alt_fpga_bridge_remove(struct platform_device *pdev)
{
struct fpga_bridge *bridge = platform_get_drvdata(pdev);
struct altera_hps2fpga_data *priv = bridge->priv;
fpga_bridge_unregister(&pdev->dev);
clk_disable_unprepare(priv->clk);
return 0;
}
MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
static struct platform_driver alt_fpga_bridge_driver = {
.probe = alt_fpga_bridge_probe,
.remove = alt_fpga_bridge_remove,
.driver = {
.name = "altera_hps2fpga_bridge",
.of_match_table = of_match_ptr(altera_fpga_of_match),
},
};
module_platform_driver(alt_fpga_bridge_driver);
MODULE_DESCRIPTION("Altera SoCFPGA HPS to FPGA Bridge");
MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment