Commit e676253b authored by Ricardo Ribalda Delgado's avatar Ricardo Ribalda Delgado Committed by Greg Kroah-Hartman

serial/8250: Add support for RS485 IOCTLs

This patch allow the users of the 8250 infrastructure to define a
handler for RS485 configration.

If no handler is defined the 8250 driver will work as usual.
Signed-off-by: default avatarRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: default avatarAlan Cox <alan@linux.intel.com>
--
v2:Change suggested by Alan "One Thousand Gnomes":
- Move rs485 structure further down on the uart_8250_port structure

 drivers/tty/serial/8250/8250_core.c | 39 +++++++++++++++++++++++++++++++++++++
 include/linux/serial_8250.h         |  3 +++
 2 files changed, 42 insertions(+)
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 27d5775e
......@@ -2843,6 +2843,42 @@ serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
return 0;
}
static int serial8250_ioctl(struct uart_port *port, unsigned int cmd,
unsigned long arg)
{
struct uart_8250_port *up =
container_of(port, struct uart_8250_port, port);
int ret;
struct serial_rs485 rs485_config;
if (!up->rs485_config)
return -ENOIOCTLCMD;
switch (cmd) {
case TIOCSRS485:
if (copy_from_user(&rs485_config, (void __user *)arg,
sizeof(rs485_config)))
return -EFAULT;
ret = up->rs485_config(up, &rs485_config);
if (ret)
return ret;
memcpy(&up->rs485, &rs485_config, sizeof(rs485_config));
return 0;
case TIOCGRS485:
if (copy_to_user((void __user *)arg, &up->rs485,
sizeof(up->rs485)))
return -EFAULT;
return 0;
default:
break;
}
return -ENOIOCTLCMD;
}
static const char *
serial8250_type(struct uart_port *port)
{
......@@ -2872,6 +2908,7 @@ static struct uart_ops serial8250_pops = {
.request_port = serial8250_request_port,
.config_port = serial8250_config_port,
.verify_port = serial8250_verify_port,
.ioctl = serial8250_ioctl,
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = serial8250_get_poll_char,
.poll_put_char = serial8250_put_poll_char,
......@@ -3388,6 +3425,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->port.fifosize = up->port.fifosize;
uart->tx_loadsz = up->tx_loadsz;
uart->capabilities = up->capabilities;
uart->rs485_config = up->rs485_config;
uart->rs485 = up->rs485;
/* Take tx_loadsz from fifosize if it wasn't set separately */
if (uart->port.fifosize && !uart->tx_loadsz)
......
......@@ -96,10 +96,13 @@ struct uart_8250_port {
unsigned char msr_saved_flags;
struct uart_8250_dma *dma;
struct serial_rs485 rs485;
/* 8250 specific callbacks */
int (*dl_read)(struct uart_8250_port *);
void (*dl_write)(struct uart_8250_port *, int);
int (*rs485_config)(struct uart_8250_port *,
struct serial_rs485 *rs485);
};
static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment