ARM: tegra: Enable video decoder on Tegra114

Add Video Decoder Engine node to Tegra114 device-tree.
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

arch/arm/boot/dts/tegra114.dtsi

@@ -17,6 +17,19 @@ memory@80000000 {
 		reg = <0x80000000 0x0>;
 	};
 
+	sram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: sram@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
 	host1x@50000000 {
 		compatible = "nvidia,tegra114-host1x";
 		reg = <0x50000000 0x00028000>;
@@ -253,6 +266,30 @@ gpio: gpio@6000d000 {
 		*/
 	};
 
+	vde@6001a000 {
+		compatible = "nvidia,tegra114-vde";
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x400>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA114_CLK_VDE>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA114_MC_RESET_VDE>;
+		iommus = <&mc TEGRA_SWGROUP_VDE>;
+	};
+
 	apbmisc@70000800 {
 		compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
 		reg = <0x70000800 0x64>, /* Chip revision */