Merge tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "A bunch of driver fixes with a tiny bit of new IDs"

* tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rk3x: fix a bunch of kernel-doc warnings
  i2c: axxia: use 'struct' for kernel-doc notation
  dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
  i2c: mxs: suppress probe-deferral error message
  i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  i2c: designware: Fix unbalanced suspended flag
  i2c: designware: use casting of u64 in clock multiplication to avoid overflow

Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml

@@ -16,7 +16,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,i2c-r9a09g011  # RZ/V2M
+          - renesas,r9a09g011-i2c  # RZ/V2M
       - const: renesas,rzv2m-i2c
 
   reg:
@@ -66,7 +66,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     i2c0: i2c@a4030000 {
-        compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+        compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
         reg = <0xa4030000 0x80>;
         interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
                      <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;

drivers/i2c/busses/i2c-axxia.c

@@ -118,7 +118,7 @@
 #define SDA_HOLD_TIME		0x90
 
 /**
- * axxia_i2c_dev - I2C device context
+ * struct axxia_i2c_dev - I2C device context
  * @base: pointer to register struct
  * @msg: pointer to current message
  * @msg_r: pointer to current read message (sequence transfer)

drivers/i2c/busses/i2c-designware-common.c

@@ -351,7 +351,8 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 		 *
 		 * If your hardware is free from tHD;STA issue, try this one.
 		 */
-		return DIV_ROUND_CLOSEST(ic_clk * tSYMBOL, MICRO) - 8 + offset;
+		return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * tSYMBOL, MICRO) -
+		       8 + offset;
 	else
 		/*
 		 * Conditional expression:
@@ -367,7 +368,8 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 		 * The reason why we need to take into account "tf" here,
 		 * is the same as described in i2c_dw_scl_lcnt().
 		 */
-		return DIV_ROUND_CLOSEST(ic_clk * (tSYMBOL + tf), MICRO) - 3 + offset;
+		return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * (tSYMBOL + tf), MICRO) -
+		       3 + offset;
 }
 
 u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
@@ -383,7 +385,8 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
 	 * account the fall time of SCL signal (tf).  Default tf value
 	 * should be 0.3 us, for safety.
 	 */
-	return DIV_ROUND_CLOSEST(ic_clk * (tLOW + tf), MICRO) - 1 + offset;
+	return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * (tLOW + tf), MICRO) -
+	       1 + offset;
 }
 
 int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)

drivers/i2c/busses/i2c-designware-pcidrv.c

@@ -396,6 +396,8 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
 	{ PCI_VDEVICE(ATI,  0x73a4), navi_amd },
 	{ PCI_VDEVICE(ATI,  0x73e4), navi_amd },
 	{ PCI_VDEVICE(ATI,  0x73c4), navi_amd },
+	{ PCI_VDEVICE(ATI,  0x7444), navi_amd },
+	{ PCI_VDEVICE(ATI,  0x7464), navi_amd },
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -351,13 +351,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
 		dev_pm_set_driver_flags(&pdev->dev,
-					DPM_FLAG_SMART_PREPARE |
-					DPM_FLAG_MAY_SKIP_RESUME);
+					DPM_FLAG_SMART_PREPARE);
 	} else {
 		dev_pm_set_driver_flags(&pdev->dev,
 					DPM_FLAG_SMART_PREPARE |
-					DPM_FLAG_SMART_SUSPEND |
-					DPM_FLAG_MAY_SKIP_RESUME);
+					DPM_FLAG_SMART_SUSPEND);
 	}
 
 	device_enable_async_suspend(&pdev->dev);
@@ -419,21 +417,8 @@ static int dw_i2c_plat_prepare(struct device *dev)
 	 */
 	return !has_acpi_companion(dev);
 }
-
-static void dw_i2c_plat_complete(struct device *dev)
-{
-	/*
-	 * The device can only be in runtime suspend at this point if it has not
-	 * been resumed throughout the ending system suspend/resume cycle, so if
-	 * the platform firmware might mess up with it, request the runtime PM
-	 * framework to resume it.
-	 */
-	if (pm_runtime_suspended(dev) && pm_resume_via_firmware())
-		pm_request_resume(dev);
-}
 #else
 #define dw_i2c_plat_prepare	NULL
-#define dw_i2c_plat_complete	NULL
 #endif
 
 #ifdef CONFIG_PM
@@ -483,7 +468,6 @@ static int __maybe_unused dw_i2c_plat_resume(struct device *dev)
 
 static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 	.prepare = dw_i2c_plat_prepare,
-	.complete = dw_i2c_plat_complete,
 	SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
 	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL)
 };

drivers/i2c/busses/i2c-mxs.c

@@ -826,8 +826,8 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	/* Setup the DMA */
 	i2c->dmach = dma_request_chan(dev, "rx-tx");
 	if (IS_ERR(i2c->dmach)) {
-		dev_err(dev, "Failed to request dma\n");
-		return PTR_ERR(i2c->dmach);
+		return dev_err_probe(dev, PTR_ERR(i2c->dmach),
+				     "Failed to request dma\n");
 	}
 
 	platform_set_drvdata(pdev, i2c);

drivers/i2c/busses/i2c-rk3x.c

@@ -80,7 +80,7 @@ enum {
 #define DEFAULT_SCL_RATE  (100 * 1000) /* Hz */
 
 /**
- * struct i2c_spec_values:
+ * struct i2c_spec_values - I2C specification values for various modes
  * @min_hold_start_ns: min hold time (repeated) START condition
  * @min_low_ns: min LOW period of the SCL clock
  * @min_high_ns: min HIGH period of the SCL cloc
@@ -136,7 +136,7 @@ static const struct i2c_spec_values fast_mode_plus_spec = {
 };
 
 /**
- * struct rk3x_i2c_calced_timings:
+ * struct rk3x_i2c_calced_timings - calculated V1 timings
  * @div_low: Divider output for low
  * @div_high: Divider output for high
  * @tuning: Used to adjust setup/hold data time,
@@ -159,7 +159,7 @@ enum rk3x_i2c_state {
 };
 
 /**
- * struct rk3x_i2c_soc_data:
+ * struct rk3x_i2c_soc_data - SOC-specific data
  * @grf_offset: offset inside the grf regmap for setting the i2c type
  * @calc_timings: Callback function for i2c timing information calculated
  */
@@ -239,7 +239,8 @@ static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c)
 }
 
 /**
- * Generate a START condition, which triggers a REG_INT_START interrupt.
+ * rk3x_i2c_start - Generate a START condition, which triggers a REG_INT_START interrupt.
+ * @i2c: target controller data
  */
 static void rk3x_i2c_start(struct rk3x_i2c *i2c)
 {
@@ -258,8 +259,8 @@ static void rk3x_i2c_start(struct rk3x_i2c *i2c)
 }
 
 /**
- * Generate a STOP condition, which triggers a REG_INT_STOP interrupt.
- *
+ * rk3x_i2c_stop - Generate a STOP condition, which triggers a REG_INT_STOP interrupt.
+ * @i2c: target controller data
  * @error: Error code to return in rk3x_i2c_xfer
  */
 static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error)
@@ -298,7 +299,8 @@ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error)
 }
 
 /**
- * Setup a read according to i2c->msg
+ * rk3x_i2c_prepare_read - Setup a read according to i2c->msg
+ * @i2c: target controller data
  */
 static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c)
 {
@@ -329,7 +331,8 @@ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c)
 }
 
 /**
- * Fill the transmit buffer with data from i2c->msg
+ * rk3x_i2c_fill_transmit_buf - Fill the transmit buffer with data from i2c->msg
+ * @i2c: target controller data
  */
 static void rk3x_i2c_fill_transmit_buf(struct rk3x_i2c *i2c)
 {
@@ -532,11 +535,10 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
 }
 
 /**
- * Get timing values of I2C specification
- *
+ * rk3x_i2c_get_spec - Get timing values of I2C specification
  * @speed: Desired SCL frequency
  *
- * Returns: Matched i2c spec values.
+ * Return: Matched i2c_spec_values.
  */
 static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
 {
@@ -549,13 +551,12 @@ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
 }
 
 /**
- * Calculate divider values for desired SCL frequency
- *
+ * rk3x_i2c_v0_calc_timings - Calculate divider values for desired SCL frequency
  * @clk_rate: I2C input clock rate
  * @t: Known I2C timing information
  * @t_calc: Caculated rk3x private timings that would be written into regs
  *
- * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
+ * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case
  * a best-effort divider value is returned in divs. If the target rate is
  * too high, we silently use the highest possible rate.
  */
@@ -710,13 +711,12 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
 }
 
 /**
- * Calculate timing values for desired SCL frequency
- *
+ * rk3x_i2c_v1_calc_timings - Calculate timing values for desired SCL frequency
  * @clk_rate: I2C input clock rate
  * @t: Known I2C timing information
  * @t_calc: Caculated rk3x private timings that would be written into regs
  *
- * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case
+ * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case
  * a best-effort divider value is returned in divs. If the target rate is
  * too high, we silently use the highest possible rate.
  * The following formulas are v1's method to calculate timings.
@@ -960,14 +960,14 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
 }
 
 /**
- * Setup I2C registers for an I2C operation specified by msgs, num.
- *
- * Must be called with i2c->lock held.
- *
+ * rk3x_i2c_setup - Setup I2C registers for an I2C operation specified by msgs, num.
+ * @i2c: target controller data
  * @msgs: I2C msgs to process
  * @num: Number of msgs
  *
- * returns: Number of I2C msgs processed or negative in case of error
+ * Must be called with i2c->lock held.
+ *
+ * Return: Number of I2C msgs processed or negative in case of error
  */
 static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num)
 {