Skip to content

L
linux
Commit e731f314 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...
parents 1f70935f accdab6d
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2671 additions and 18564 deletions
Documentation/devicetree/bindings/arm/omap/prm-inst.txt
View file @ e731f314
......@@ -18,6 +18,7 @@ Required properties:
(base address and length)
Optional properties:
- #power-domain-cells: Should be 0 if the instance is a power domain provider.
- #reset-cells: Should be 1 if the PRM instance in question supports resets.
Example:
......@@ -25,5 +26,6 @@ Example:
prm_dsp2: prm@1b00 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x1b00 0x40>;
#power-domain-cells = <0>;
#reset-cells = <1>;
};
MAINTAINERS
View file @ e731f314
......@@ -2199,8 +2199,8 @@ ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
S: Orphan
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
F: arch/arm/mach-s3c24xx/gta02.h
F: arch/arm/mach-s3c24xx/mach-gta02.c
F: arch/arm/mach-s3c/gta02.h
F: arch/arm/mach-s3c/mach-gta02.c
ARM/Orion SoC/Technologic Systems TS-78xx platform support
M: Alexander Clouter <alex@digriz.org.uk>
......@@ -2379,7 +2379,7 @@ ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene@kernel.org>
M: Krzysztof Kozlowski <krzk@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
F: Documentation/arm/samsung/
......@@ -2389,10 +2389,8 @@ F: arch/arm/boot/dts/exynos*
F: arch/arm/boot/dts/s3c*
F: arch/arm/boot/dts/s5p*
F: arch/arm/mach-exynos*/
F: arch/arm/mach-s3c24*/
F: arch/arm/mach-s3c64xx/
F: arch/arm/mach-s3c/
F: arch/arm/mach-s5p*/
F: arch/arm/plat-samsung/
F: arch/arm64/boot/dts/exynos/
F: drivers/*/*/*s3c24*
F: drivers/*/*s3c24*
......@@ -2403,6 +2401,9 @@ F: drivers/soc/samsung/
F: drivers/tty/serial/samsung*
F: include/linux/soc/samsung/
N: exynos
N: s3c2410
N: s3c64xx
N: s5pv210
ARM/SAMSUNG MOBILE MACHINE SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
......@@ -2421,7 +2422,7 @@ F: drivers/media/platform/s5p-g2d/
ARM/SAMSUNG S5P SERIES HDMI CEC SUBSYSTEM SUPPORT
M: Marek Szyprowski <m.szyprowski@samsung.com>
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
L: linux-media@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/media/s5p-cec.txt
......@@ -3415,7 +3416,7 @@ M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: arch/arm/boot/dts/bcm470*
F: arch/arm/boot/dts/bcm5301x*.dtsi
F: arch/arm/boot/dts/bcm5301*
F: arch/arm/boot/dts/bcm953012*
F: arch/arm/mach-bcm/bcm_5301x.c
......@@ -13447,7 +13448,7 @@ PCI DRIVER FOR SAMSUNG EXYNOS
M: Jingoo Han <jingoohan1@gmail.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
F: drivers/pci/controller/dwc/pci-exynos.c
......@@ -13854,7 +13855,7 @@ M: Tomasz Figa <tomasz.figa@gmail.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
......@@ -15415,7 +15416,7 @@ F: include/linux/mfd/samsung/
SAMSUNG S3C24XX/S3C64XX SOC SERIES CAMIF DRIVER
M: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
L: linux-media@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
F: drivers/media/platform/s3c-camif/
F: include/media/drv-intf/s3c_camif.h
......@@ -15465,7 +15466,7 @@ SAMSUNG SOC CLOCK DRIVERS
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
M: Tomasz Figa <tomasz.figa@gmail.com>
M: Chanwoo Choi <cw00.choi@samsung.com>
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git
F: Documentation/devicetree/bindings/clock/exynos*.txt
......@@ -15473,17 +15474,20 @@ F: Documentation/devicetree/bindings/clock/samsung,s3c*
F: Documentation/devicetree/bindings/clock/samsung,s5p*
F: drivers/clk/samsung/
F: include/dt-bindings/clock/exynos*.h
F: include/linux/clk/samsung.h
F: include/linux/platform_data/clk-s3c2410.h
SAMSUNG SPI DRIVERS
M: Kukjin Kim <kgene@kernel.org>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Andi Shyti <andi@etezian.org>
L: linux-spi@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/spi/spi-samsung.txt
F: drivers/spi/spi-s3c*
F: include/linux/platform_data/spi-s3c64xx.h
F: include/linux/spi/s3c24xx-fiq.h
SAMSUNG SXGBE DRIVERS
M: Byungho An <bh74.an@samsung.com>
......@@ -16001,19 +16005,17 @@ F: drivers/video/fbdev/simplefb.c
F: include/linux/platform_data/simplefb.h
SIMTEC EB110ATX (Chalice CATS)
M: Vincent Sanders <vince@simtec.co.uk>
M: Simtec Linux Team <linux@simtec.co.uk>
S: Supported
W: http://www.simtec.co.uk/products/EB110ATX/
SIMTEC EB2410ITX (BAST)
M: Vincent Sanders <vince@simtec.co.uk>
M: Simtec Linux Team <linux@simtec.co.uk>
S: Supported
W: http://www.simtec.co.uk/products/EB2410ITX/
F: arch/arm/mach-s3c24xx/bast-ide.c
F: arch/arm/mach-s3c24xx/bast-irq.c
F: arch/arm/mach-s3c24xx/mach-bast.c
F: arch/arm/mach-s3c/bast-ide.c
F: arch/arm/mach-s3c/bast-irq.c
F: arch/arm/mach-s3c/mach-bast.c
SIOX
M: Thorsten Scherer <t.scherer@eckelmann.de>
......@@ -18952,7 +18954,7 @@ F: Documentation/devicetree/bindings/mfd/wm831x.txt
F: Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
F: Documentation/devicetree/bindings/sound/wlf,arizona.yaml
F: Documentation/hwmon/wm83??.rst
F: arch/arm/mach-s3c64xx/mach-crag6410*
F: arch/arm/mach-s3c/mach-crag6410*
F: drivers/clk/clk-wm83*.c
F: drivers/extcon/extcon-arizona.c
F: drivers/gpio/gpio-*wm*.c
......
arch/arm/Kconfig
View file @ e731f314
......@@ -268,9 +268,7 @@ config PHYS_OFFSET
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
default 0x00000000 if ARCH_EBSA110 || \
ARCH_FOOTBRIDGE || \
ARCH_INTEGRATOR || \
ARCH_REALVIEW
ARCH_FOOTBRIDGE
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x20000000 if ARCH_S5PV210
default 0xc0000000 if ARCH_SA1100
......@@ -506,11 +504,12 @@ config ARCH_S3C24XX
select GPIOLIB
select GENERIC_IRQ_MULTI_HANDLER
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_IO_H
select S3C2410_WATCHDOG
select SAMSUNG_ATAGS
select USE_OF
select WATCHDOG
help
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
......@@ -639,7 +638,6 @@ source "arch/arm/mach-dove/Kconfig"
source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
......@@ -712,9 +710,7 @@ source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
source "arch/arm/mach-s3c64xx/Kconfig"
source "arch/arm/mach-s3c/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
......
arch/arm/Kconfig.debug
View file @ e731f314
......@@ -1005,7 +1005,7 @@ choice
via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
......@@ -1017,7 +1017,7 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
......@@ -1029,7 +1029,7 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
......@@ -1041,7 +1041,7 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
depends on ARCH_EXYNOS || ARCH_S5PV210
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
......@@ -1086,6 +1086,14 @@ choice
on SA-11x0 UART ports. The kernel will check for the first
enabled UART in a sequence 3-1-2.
config DEBUG_SD5203_UART
bool "Hisilicon SD5203 Debug UART"
depends on ARCH_SD5203
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
on SD5203 UART.
config DEBUG_SOCFPGA_UART0
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART0 for low-level debug"
......@@ -1497,6 +1505,16 @@ config DEBUG_S3C64XX_UART
config DEBUG_S5PV210_UART
bool
config DEBUG_S3C_UART
depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \
DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \
DEBUG_EXYNOS_UART
int
default "0" if DEBUG_S3C_UART0
default "1" if DEBUG_S3C_UART1
default "2" if DEBUG_S3C_UART2
default "3" if DEBUG_S3C_UART3
config DEBUG_OMAP2PLUS_UART
bool
depends on ARCH_OMAP2PLUS
......@@ -1650,6 +1668,7 @@ config DEBUG_UART_PHYS
default 0x11006000 if DEBUG_MT6589_UART0
default 0x11009000 if DEBUG_MT8135_UART3
default 0x16000000 if DEBUG_INTEGRATOR
default 0x1600d000 if DEBUG_SD5203_UART
default 0x18000300 if DEBUG_BCM_5301X
default 0x18000400 if DEBUG_BCM_HR2
default 0x18010000 if DEBUG_SIRFATLAS7_UART0
......@@ -1852,7 +1871,7 @@ config DEBUG_UART_VIRT
default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
default 0xfec90000 if DEBUG_RK32_UART2
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
default 0xfed60000 if DEBUG_RK29_UART0
default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
......
arch/arm/Makefile
View file @ e731f314
......@@ -212,8 +212,7 @@ machine-$(CONFIG_ARCH_REALTEK) += realtek
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
machine-$(CONFIG_PLAT_SAMSUNG) += s3c
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_RENESAS) += shmobile
......@@ -235,13 +234,9 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_EXYNOS) += samsung
plat-$(CONFIG_ARCH_OMAP) += omap
plat-$(CONFIG_ARCH_S3C64XX) += samsung
plat-$(CONFIG_ARCH_S5PV210) += samsung
plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_S3C24XX) += samsung
plat-$(CONFIG_PLAT_VERSATILE) += versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
......
arch/arm/boot/dts/am33xx-l4.dtsi
View file @ e731f314
......@@ -425,7 +425,6 @@ target-module@39000 { /* 0x44e39000, ap 33 02.0 */
target-module@3e000 { /* 0x44e3e000, ap 35 60.0 */
compatible = "ti,sysc-omap4-simple", "ti,sysc";
ti,hwmods = "rtc";
reg = <0x3e074 0x4>,
<0x3e078 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/boot/dts/am33xx.dtsi
View file @ e731f314
......@@ -578,6 +578,7 @@ target-module@56000000 {
<SYSC_IDLE_SMART>;
clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
clock-names = "fck";
power-domains = <&prm_gfx>;
resets = <&prm_gfx 0>;
reset-names = "rstctrl";
#address-cells = <1>;
......@@ -617,6 +618,7 @@ prm_device: prm@f00 {
prm_gfx: prm@1100 {
compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
reg = <0x1100 0x100>;
#power-domain-cells = <0>;
#reset-cells = <1>;
};
};
......
arch/arm/boot/dts/am4372.dtsi
View file @ e731f314
......@@ -517,6 +517,7 @@ target-module@56000000 {
<SYSC_IDLE_SMART>;
clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
clock-names = "fck";
power-domains = <&prm_gfx>;
resets = <&prm_gfx 0>;
reset-names = "rstctrl";
#address-cells = <1>;
......@@ -533,6 +534,7 @@ &prcm {
prm_gfx: prm@400 {
compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
reg = <0x400 0x100>;
#power-domain-cells = <0>;
#reset-cells = <1>;
};
......
arch/arm/boot/dts/am437x-l4.dtsi
View file @ e731f314
......@@ -409,9 +409,8 @@ target-module@39000 { /* 0x44e39000, ap 32 02.0 */
ranges = <0x0 0x39000 0x1000>;
};
target-module@3e000 { /* 0x44e3e000, ap 34 60.0 */
rtc_target: target-module@3e000 { /* 0x44e3e000, ap 34 60.0 */
compatible = "ti,sysc-omap4-simple", "ti,sysc";
ti,hwmods = "rtc";
reg = <0x3e074 0x4>,
<0x3e078 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/boot/dts/am43x-epos-evm.dts
View file @ e731f314
......@@ -833,6 +833,10 @@ &epwmss0 {
status = "okay";
};
&rtc_target {
status = "disabled";
};
&tscadc {
status = "okay";
......
arch/arm/boot/dts/dra7-l4.dtsi
View file @ e731f314
......@@ -3561,7 +3561,6 @@ timer16: timer@0 {
rtctarget: target-module@38000 { /* 0x48838000, ap 29 12.0 */
compatible = "ti,sysc-omap4-simple", "ti,sysc";
ti,hwmods = "rtcss";
reg = <0x38074 0x4>,
<0x38078 0x4>;
reg-names = "rev", "sysc";
......
arch/arm/boot/dts/omap4-l4-abe.dtsi
View file @ e731f314
&l4_abe { /* 0x40100000 */
compatible = "ti,omap4-l4-abe", "simple-bus";
compatible = "ti,omap4-l4-abe", "simple-pm-bus";
reg = <0x40100000 0x400>,
<0x40100400 0x400>;
reg-names = "la", "ap";
power-domains = <&prm_abe>;
/* OMAP4_L4_ABE_CLKCTRL is read-only */
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */
<0x49000000 0x49000000 0x100000>;
segment@0 { /* 0x40100000 */
compatible = "simple-bus";
compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges =
......
arch/arm/boot/dts/omap4.dtsi
View file @ e731f314
......@@ -658,6 +658,12 @@ prm_tesla: prm@400 {
#reset-cells = <1>;
};
prm_abe: prm@500 {
compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
reg = <0x500 0x100>;
#power-domain-cells = <0>;
};
prm_core: prm@700 {
compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
reg = <0x700 0x100>;
......
arch/arm/boot/dts/omap5-l4-abe.dtsi
View file @ e731f314
&l4_abe { /* 0x40100000 */
compatible = "ti,omap5-l4-abe", "simple-bus";
compatible = "ti,omap5-l4-abe", "simple-pm-bus";
reg = <0x40100000 0x400>,
<0x40100400 0x400>;
reg-names = "la", "ap";
power-domains = <&prm_abe>;
/* OMAP5_L4_ABE_CLKCTRL is read-only */
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */
<0x49000000 0x49000000 0x100000>;
segment@0 { /* 0x40100000 */
compatible = "simple-bus";
compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges =
......
arch/arm/boot/dts/omap5.dtsi
View file @ e731f314
......@@ -676,6 +676,12 @@ prm_dsp: prm@400 {
#reset-cells = <1>;
};
prm_abe: prm@500 {
compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
reg = <0x500 0x100>;
#power-domain-cells = <0>;
};
prm_core: prm@700 {
compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
reg = <0x700 0x100>;
......
arch/arm/configs/imx_v4_v5_defconfig
View file @ e731f314
......@@ -20,9 +20,9 @@ CONFIG_MACH_MX27ADS=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_PCA100=y
CONFIG_MACH_IMX27_DT=y
CONFIG_SOC_IMX1=y
CONFIG_SOC_IMX25=y
CONFIG_SOC_IMX27=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
......
arch/arm/configs/imx_v6_v7_defconfig
View file @ e731f314
......@@ -15,20 +15,8 @@ CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_MXC=y
CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_PCM037=y
CONFIG_MACH_PCM037_EET=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
CONFIG_MACH_QONG=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_KZM_ARM11_01=y
CONFIG_MACH_IMX31_DT=y
CONFIG_MACH_IMX35_DT=y
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
CONFIG_SOC_IMX31=y
CONFIG_SOC_IMX35=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
......
arch/arm/configs/multi_v5_defconfig
View file @ e731f314
......@@ -29,8 +29,8 @@ CONFIG_MACH_MX27ADS=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_PCA100=y
CONFIG_MACH_IMX27_DT=y
CONFIG_SOC_IMX25=y
CONFIG_SOC_IMX27=y
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_ARCH_ORION5X=y
......
arch/arm/include/debug/brcmstb.S
View file @ e731f314
......@@ -32,6 +32,8 @@
#define UARTA_7271 UARTA_7268
#define UARTA_7278 REG_PHYS_ADDR_V7(0x40c000)
#define UARTA_7216 UARTA_7278
#define UARTA_72164 UARTA_7278
#define UARTA_72165 UARTA_7278
#define UARTA_7364 REG_PHYS_ADDR(0x40b000)
#define UARTA_7366 UARTA_7364
#define UARTA_74371 REG_PHYS_ADDR(0x406b00)
......@@ -84,17 +86,19 @@ ARM_BE8( rev \rv, \rv )
/* Chip specific detection starts here */
20: checkuart(\rp, \rv, 0x33900000, 3390)
21: checkuart(\rp, \rv, 0x72160000, 7216)
22: checkuart(\rp, \rv, 0x72500000, 7250)
23: checkuart(\rp, \rv, 0x72550000, 7255)
24: checkuart(\rp, \rv, 0x72600000, 7260)
25: checkuart(\rp, \rv, 0x72680000, 7268)
26: checkuart(\rp, \rv, 0x72710000, 7271)
27: checkuart(\rp, \rv, 0x72780000, 7278)
28: checkuart(\rp, \rv, 0x73640000, 7364)
29: checkuart(\rp, \rv, 0x73660000, 7366)
30: checkuart(\rp, \rv, 0x07437100, 74371)
31: checkuart(\rp, \rv, 0x74390000, 7439)
32: checkuart(\rp, \rv, 0x74450000, 7445)
22: checkuart(\rp, \rv, 0x07216400, 72164)
23: checkuart(\rp, \rv, 0x07216500, 72165)
24: checkuart(\rp, \rv, 0x72500000, 7250)
25: checkuart(\rp, \rv, 0x72550000, 7255)
26: checkuart(\rp, \rv, 0x72600000, 7260)
27: checkuart(\rp, \rv, 0x72680000, 7268)
28: checkuart(\rp, \rv, 0x72710000, 7271)
29: checkuart(\rp, \rv, 0x72780000, 7278)
30: checkuart(\rp, \rv, 0x73640000, 7364)
31: checkuart(\rp, \rv, 0x73660000, 7366)
32: checkuart(\rp, \rv, 0x07437100, 74371)
33: checkuart(\rp, \rv, 0x74390000, 7439)
34: checkuart(\rp, \rv, 0x74450000, 7445)
/* No valid UART found */
90: mov \rp, #0
......
arch/arm/mach-at91/pm.c
View file @ e731f314
......@@ -51,10 +51,11 @@ static struct at91_soc_pm soc_pm = {
};
static const match_table_t pm_modes __initconst = {
{ AT91_PM_STANDBY, "standby" },
{ AT91_PM_ULP0, "ulp0" },
{ AT91_PM_ULP1, "ulp1" },
{ AT91_PM_BACKUP, "backup" },
{ AT91_PM_STANDBY, "standby" },
{ AT91_PM_ULP0, "ulp0" },
{ AT91_PM_ULP0_FAST, "ulp0-fast" },
{ AT91_PM_ULP1, "ulp1" },
{ AT91_PM_BACKUP, "backup" },
{ -1, NULL },
};
......@@ -557,11 +558,6 @@ static void at91rm9200_idle(void)
writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
}
static void at91sam9x60_idle(void)
{
cpu_do_idle();
}
static void at91sam9_idle(void)
{
writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
......@@ -789,6 +785,51 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
{ /* sentinel */ },
};
static void __init at91_pm_modes_validate(const int *modes, int len)
{
u8 i, standby = 0, suspend = 0;
int mode;
for (i = 0; i < len; i++) {
if (standby && suspend)
break;
if (modes[i] == soc_pm.data.standby_mode && !standby) {
standby = 1;
continue;
}
if (modes[i] == soc_pm.data.suspend_mode && !suspend) {
suspend = 1;
continue;
}
}
if (!standby) {
if (soc_pm.data.suspend_mode == AT91_PM_STANDBY)
mode = AT91_PM_ULP0;
else
mode = AT91_PM_STANDBY;
pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
pm_modes[soc_pm.data.standby_mode].pattern,
pm_modes[mode].pattern);
soc_pm.data.standby_mode = mode;
}
if (!suspend) {
if (soc_pm.data.standby_mode == AT91_PM_ULP0)
mode = AT91_PM_STANDBY;
else
mode = AT91_PM_ULP0;
pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
pm_modes[soc_pm.data.suspend_mode].pattern,
pm_modes[mode].pattern);
soc_pm.data.suspend_mode = mode;
}
}
static void __init at91_pm_init(void (*pm_idle)(void))
{
struct device_node *pmc_np;
......@@ -800,6 +841,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
soc_pm.data.pmc = of_iomap(pmc_np, 0);
of_node_put(pmc_np);
if (!soc_pm.data.pmc) {
pr_err("AT91: PM not supported, PMC not found\n");
return;
......@@ -830,6 +872,14 @@ void __init at91rm9200_pm_init(void)
if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
return;
/*
* Force STANDBY and ULP0 mode to avoid calling
* at91_pm_modes_validate() which may increase booting time.
* Platform supports anyway only STANDBY and ULP0 modes.
*/
soc_pm.data.standby_mode = AT91_PM_STANDBY;
soc_pm.data.suspend_mode = AT91_PM_ULP0;
at91_dt_ramc();
/*
......@@ -842,12 +892,17 @@ void __init at91rm9200_pm_init(void)
void __init sam9x60_pm_init(void)
{
static const int modes[] __initconst = {
AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
};
if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
return;
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
at91_pm_modes_init();
at91_dt_ramc();
at91_pm_init(at91sam9x60_idle);
at91_pm_init(NULL);
soc_pm.ws_ids = sam9x60_ws_ids;
soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
......@@ -858,26 +913,46 @@ void __init at91sam9_pm_init(void)
if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
return;
/*
* Force STANDBY and ULP0 mode to avoid calling
* at91_pm_modes_validate() which may increase booting time.
* Platform supports anyway only STANDBY and ULP0 modes.
*/
soc_pm.data.standby_mode = AT91_PM_STANDBY;
soc_pm.data.suspend_mode = AT91_PM_ULP0;
at91_dt_ramc();
at91_pm_init(at91sam9_idle);
}
void __init sama5_pm_init(void)
{
static const int modes[] __initconst = {
AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
};
if (!IS_ENABLED(CONFIG_SOC_SAMA5))
return;
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
at91_dt_ramc();
at91_pm_init(NULL);
}
void __init sama5d2_pm_init(void)
{
static const int modes[] __initconst = {
AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
AT91_PM_BACKUP,
};
if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
return;
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
at91_pm_modes_init();
sama5_pm_init();
at91_dt_ramc();
at91_pm_init(NULL);
soc_pm.ws_ids = sama5d2_ws_ids;
soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
......
arch/arm/mach-at91/pm.h
View file @ e731f314
......@@ -19,8 +19,9 @@
#define AT91_PM_STANDBY 0x00
#define AT91_PM_ULP0 0x01
#define AT91_PM_ULP1 0x02
#define AT91_PM_BACKUP 0x03
#define AT91_PM_ULP0_FAST 0x02
#define AT91_PM_ULP1 0x03
#define AT91_PM_BACKUP 0x04
#ifndef __ASSEMBLY__
struct at91_pm_data {
......
arch/arm/mach-at91/pm_suspend.S
View file @ e731f314
......@@ -164,7 +164,22 @@ ENDPROC(at91_backup_mode)
.macro at91_pm_ulp0_mode
ldr pmc, .pmc_base
ldr tmp2, .pm_mode
ldr tmp3, .mckr_offset
/* Check if ULP0 fast variant has been requested. */
cmp tmp2, #AT91_PM_ULP0_FAST
bne 0f
/* Set highest prescaler for power saving */
ldr tmp1, [pmc, tmp3]
bic tmp1, tmp1, #AT91_PMC_PRES
orr tmp1, tmp1, #AT91_PMC_PRES_64
str tmp1, [pmc, tmp3]
wait_mckrdy
b 1f
0:
/* Turn off the crystal oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCEN
......@@ -192,7 +207,18 @@ ENDPROC(at91_backup_mode)
/* Wait for interrupt */
1: at91_cpu_idle
/* Restore RC oscillator state */
/* Check if ULP0 fast variant has been requested. */
cmp tmp2, #AT91_PM_ULP0_FAST
bne 5f
/* Set lowest prescaler for fast resume. */
ldr tmp1, [pmc, tmp3]
bic tmp1, tmp1, #AT91_PMC_PRES
str tmp1, [pmc, tmp3]
wait_mckrdy
b 6f
5: /* Restore RC oscillator state */
ldr tmp1, .saved_osc_status
tst tmp1, #AT91_PMC_MOSCRCS
beq 4f
......@@ -216,6 +242,7 @@ ENDPROC(at91_backup_mode)
str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
6:
.endm
/**
......@@ -473,23 +500,29 @@ ENDPROC(at91_backup_mode)
ENTRY(at91_ulp_mode)
ldr pmc, .pmc_base
ldr tmp2, .mckr_offset
ldr tmp3, .pm_mode
/* Save Master clock setting */
ldr tmp1, [pmc, tmp2]
str tmp1, .saved_mckr
/*
* Set the Master clock source to slow clock
* Set master clock source to:
* - MAINCK if using ULP0 fast variant
* - slow clock, otherwise
*/
bic tmp1, tmp1, #AT91_PMC_CSS
cmp tmp3, #AT91_PM_ULP0_FAST
bne save_mck
orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
save_mck:
str tmp1, [pmc, tmp2]
wait_mckrdy
at91_plla_disable
ldr r0, .pm_mode
cmp r0, #AT91_PM_ULP1
cmp tmp3, #AT91_PM_ULP1
beq ulp1_mode
at91_pm_ulp0_mode
......
arch/arm/mach-bcm/Kconfig
View file @ e731f314
......@@ -208,6 +208,7 @@ config ARCH_BRCMSTB
select ARM_GIC
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
select BCM7038_L1_IRQ
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
select ARCH_HAS_HOLES_MEMORYMODEL
......
arch/arm/mach-davinci/board-dm644x-evm.c
View file @ e731f314
......@@ -548,8 +548,7 @@ static const struct property_entry eeprom_properties[] = {
*/
static struct i2c_client *dm6446evm_msp;
static int dm6446evm_msp_probe(struct i2c_client *client,
const struct i2c_device_id *id)
static int dm6446evm_msp_probe(struct i2c_client *client)
{
dm6446evm_msp = client;
return 0;
......@@ -569,7 +568,7 @@ static const struct i2c_device_id dm6446evm_msp_ids[] = {
static struct i2c_driver dm6446evm_msp_driver = {
.driver.name = "dm6446evm_msp",
.id_table = dm6446evm_msp_ids,
.probe = dm6446evm_msp_probe,
.probe_new = dm6446evm_msp_probe,
.remove = dm6446evm_msp_remove,
};
......
arch/arm/mach-davinci/board-dm646x-evm.c
View file @ e731f314
......@@ -160,8 +160,7 @@ static struct platform_device davinci_aemif_device = {
#define DM646X_EVM_ATA_PWD BIT(1)
/* CPLD Register 0 Client: used for I/O Control */
static int cpld_reg0_probe(struct i2c_client *client,
const struct i2c_device_id *id)
static int cpld_reg0_probe(struct i2c_client *client)
{
if (HAS_ATA) {
u8 data;
......@@ -197,7 +196,7 @@ static const struct i2c_device_id cpld_reg_ids[] = {
static struct i2c_driver dm6467evm_cpld_driver = {
.driver.name = "cpld_reg0",
.id_table = cpld_reg_ids,
.probe = cpld_reg0_probe,
.probe_new = cpld_reg0_probe,
};
/* LEDS */
......@@ -397,8 +396,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
#ifdef CONFIG_I2C
static struct i2c_client *cpld_client;
static int cpld_video_probe(struct i2c_client *client,
const struct i2c_device_id *id)
static int cpld_video_probe(struct i2c_client *client)
{
cpld_client = client;
return 0;
......@@ -419,7 +417,7 @@ static struct i2c_driver cpld_video_driver = {
.driver = {
.name = "cpld_video",
},
.probe = cpld_video_probe,
.probe_new = cpld_video_probe,
.remove = cpld_video_remove,
.id_table = cpld_video_id,
};
......
arch/arm/mach-exynos/Kconfig
View file @ e731f314
......@@ -24,7 +24,6 @@ menuconfig ARCH_EXYNOS
select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
......
arch/arm/mach-exynos/Makefile
View file @ e731f314
......@@ -3,10 +3,6 @@
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
# Core
obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o
obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
......
arch/arm/mach-exynos/common.h
View file @ e731f314
......@@ -24,12 +24,12 @@
#define EXYNOS5800_SOC_ID 0xE5422000
#define EXYNOS5_SOC_MASK 0xFFFFF000
extern unsigned long samsung_cpu_id;
extern unsigned long exynos_cpu_id;
#define IS_SAMSUNG_CPU(name, id, mask) \
static inline int is_samsung_##name(void) \
{ \
return ((samsung_cpu_id & mask) == (id & mask)); \
return ((exynos_cpu_id & mask) == (id & mask)); \
}
IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
......@@ -147,7 +147,7 @@ extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
extern void exynos_set_delayed_reset_assertion(bool enable);
extern unsigned int samsung_rev(void);
extern unsigned int exynos_rev(void);
extern void exynos_core_restart(u32 core_id);
extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);
......
arch/arm/mach-exynos/exynos.c
View file @ e731f314
......@@ -19,11 +19,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#include <plat/cpu.h>
#include "common.h"
#define S3C_ADDR_BASE 0xF6000000
#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x))
#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
static struct platform_device exynos_cpuidle = {
.name = "exynos_cpuidle",
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
......@@ -36,6 +37,14 @@ void __iomem *sysram_base_addr __ro_after_init;
phys_addr_t sysram_base_phys __ro_after_init;
void __iomem *sysram_ns_base_addr __ro_after_init;
unsigned long exynos_cpu_id;
static unsigned int exynos_cpu_rev;
unsigned int exynos_rev(void)
{
return exynos_cpu_rev;
}
void __init exynos_sysram_init(void)
{
struct device_node *node;
......@@ -86,7 +95,11 @@ static void __init exynos_init_io(void)
of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
/* detect cpu id and rev. */
s5p_init_cpu(S5P_VA_CHIPID);
exynos_cpu_id = readl_relaxed(S5P_VA_CHIPID);
exynos_cpu_rev = exynos_cpu_id & 0xFF;
pr_info("Samsung CPU ID: 0x%08lx\n", exynos_cpu_id);
}
/*
......@@ -193,8 +206,8 @@ static void __init exynos_dt_fixup(void)
}
DT_MACHINE_START(EXYNOS_DT, "Samsung Exynos (Flattened Device Tree)")
.l2c_aux_val = 0x3c400000,
.l2c_aux_mask = 0xc20fffff,
.l2c_aux_val = 0x38400000,
.l2c_aux_mask = 0xc60fffff,
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos_init_io,
.init_early = exynos_firmware_init,
......
arch/arm/mach-exynos/include/mach/map.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Exynos - Memory map definitions
*/
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
#include <plat/map-s5p.h>
#define EXYNOS_PA_CHIPID 0x10000000
#endif /* __ASM_ARCH_MAP_H */
arch/arm/mach-exynos/platsmp.c
View file @ e731f314
......@@ -22,8 +22,6 @@
#include <asm/smp_scu.h>
#include <asm/firmware.h>
#include <mach/map.h>
#include "common.h"
extern void exynos4_secondary_startup(void);
......@@ -188,7 +186,7 @@ void exynos_scu_enable(void)
static void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
if (soc_is_exynos4210() && exynos_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM5;
return sysram_base_addr;
}
......
arch/arm/mach-exynos/pm.c
View file @ e731f314
......@@ -26,18 +26,18 @@
static inline void __iomem *exynos_boot_vector_addr(void)
{
if (samsung_rev() == EXYNOS4210_REV_1_1)
if (exynos_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM7;
else if (samsung_rev() == EXYNOS4210_REV_1_0)
else if (exynos_rev() == EXYNOS4210_REV_1_0)
return sysram_base_addr + 0x24;
return pmu_base_addr + S5P_INFORM0;
}
static inline void __iomem *exynos_boot_vector_flag(void)
{
if (samsung_rev() == EXYNOS4210_REV_1_1)
if (exynos_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM6;
else if (samsung_rev() == EXYNOS4210_REV_1_0)
else if (exynos_rev() == EXYNOS4210_REV_1_0)
return sysram_base_addr + 0x20;
return pmu_base_addr + S5P_INFORM1;
}
......
arch/arm/mach-hisi/Kconfig
View file @ e731f314
# SPDX-License-Identifier: GPL-2.0-only
config ARCH_HISI
bool "Hisilicon SoC Support"
depends on ARCH_MULTI_V7
depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
select ARM_AMBA
select ARM_GIC
select ARM_GIC if ARCH_MULTI_V7
select ARM_TIMER_SP804
select POWER_RESET
select POWER_RESET_HISI
......@@ -15,6 +15,7 @@ menu "Hisilicon platform type"
config ARCH_HI3xxx
bool "Hisilicon Hi36xx family"
depends on ARCH_MULTI_V7
select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
......@@ -25,6 +26,7 @@ config ARCH_HI3xxx
config ARCH_HIP01
bool "Hisilicon HIP01 family"
depends on ARCH_MULTI_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ARM_GLOBAL_TIMER
......@@ -33,6 +35,7 @@ config ARCH_HIP01
config ARCH_HIP04
bool "Hisilicon HiP04 Cortex A15 family"
depends on ARCH_MULTI_V7
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
select MCPM if SMP
......@@ -43,6 +46,7 @@ config ARCH_HIP04
config ARCH_HIX5HD2
bool "Hisilicon X5HD2 family"
depends on ARCH_MULTI_V7
select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
......@@ -50,6 +54,14 @@ config ARCH_HIX5HD2
select PINCTRL_SINGLE
help
Support for Hisilicon HIX5HD2 SoC family
config ARCH_SD5203
bool "Hisilicon SD5203 family"
depends on ARCH_MULTI_V5
select DW_APB_ICTL
help
Support for Hisilicon SD5203 SoC family
endmenu
endif
arch/arm/mach-imx/3ds_debugboard.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/smsc911x.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include "3ds_debugboard.h"
#include "hardware.h"
/* LAN9217 ethernet base address */
#define LAN9217_BASE_ADDR(n) (n + 0x0)
/* External UART */
#define UARTA_BASE_ADDR(n) (n + 0x8000)
#define UARTB_BASE_ADDR(n) (n + 0x10000)
#define BOARD_IO_ADDR(n) (n + 0x20000)
/* LED switchs */
#define LED_SWITCH_REG 0x00
/* buttons */
#define SWITCH_BUTTONS_REG 0x08
/* status, interrupt */
#define INTR_STATUS_REG 0x10
#define INTR_MASK_REG 0x38
#define INTR_RESET_REG 0x20
/* magic word for debug CPLD */
#define MAGIC_NUMBER1_REG 0x40
#define MAGIC_NUMBER2_REG 0x48
/* CPLD code version */
#define CPLD_CODE_VER_REG 0x50
/* magic word for debug CPLD */
#define MAGIC_NUMBER3_REG 0x58
/* module reset register*/
#define MODULE_RESET_REG 0x60
/* CPU ID and Personality ID */
#define MCU_BOARD_ID_REG 0x68
#define MXC_MAX_EXP_IO_LINES 16
/* interrupts like external uart , external ethernet etc*/
#define EXPIO_INT_ENET 0
#define EXPIO_INT_XUART_A 1
#define EXPIO_INT_XUART_B 2
#define EXPIO_INT_BUTTON_A 3
#define EXPIO_INT_BUTTON_B 4
static void __iomem *brd_io;
static struct irq_domain *domain;
static struct resource smsc911x_resources[] = {
{
.flags = IORESOURCE_MEM,
} , {
.flags = IORESOURCE_IRQ,
},
};
static struct smsc911x_platform_config smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
};
static struct platform_device smsc_lan9217_device = {
.name = "smsc911x",
.id = -1,
.dev = {
.platform_data = &smsc911x_config,
},
.num_resources = ARRAY_SIZE(smsc911x_resources),
.resource = smsc911x_resources,
};
static void mxc_expio_irq_handler(struct irq_desc *desc)
{
u32 imr_val;
u32 int_valid;
u32 expio_irq;
/* irq = gpio irq number */
desc->irq_data.chip->irq_mask(&desc->irq_data);
imr_val = imx_readw(brd_io + INTR_MASK_REG);
int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
expio_irq = 0;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
if ((int_valid & 1) == 0)
continue;
generic_handle_irq(irq_find_mapping(domain, expio_irq));
}
desc->irq_data.chip->irq_ack(&desc->irq_data);
desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
/*
* Disable an expio pin's interrupt by setting the bit in the imr.
* Irq is an expio virtual irq number
*/
static void expio_mask_irq(struct irq_data *d)
{
u16 reg;
u32 expio = d->hwirq;
reg = imx_readw(brd_io + INTR_MASK_REG);
reg |= (1 << expio);
imx_writew(reg, brd_io + INTR_MASK_REG);
}
static void expio_ack_irq(struct irq_data *d)
{
u32 expio = d->hwirq;
imx_writew(1 << expio, brd_io + INTR_RESET_REG);
imx_writew(0, brd_io + INTR_RESET_REG);
expio_mask_irq(d);
}
static void expio_unmask_irq(struct irq_data *d)
{
u16 reg;
u32 expio = d->hwirq;
reg = imx_readw(brd_io + INTR_MASK_REG);
reg &= ~(1 << expio);
imx_writew(reg, brd_io + INTR_MASK_REG);
}
static struct irq_chip expio_irq_chip = {
.irq_ack = expio_ack_irq,
.irq_mask = expio_mask_irq,
.irq_unmask = expio_unmask_irq,
};
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
REGULATOR_SUPPLY("vddvario", "smsc911x"),
};
int __init mxc_expio_init(u32 base, u32 intr_gpio)
{
u32 p_irq = gpio_to_irq(intr_gpio);
int irq_base;
int i;
brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
if (brd_io == NULL)
return -ENOMEM;
if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
(imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
(imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
pr_info("3-Stack Debug board not detected\n");
iounmap(brd_io);
brd_io = NULL;
return -ENODEV;
}
pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
readw(brd_io + CPLD_CODE_VER_REG));
/*
* Configure INT line as GPIO input
*/
gpio_request(intr_gpio, "expio_pirq");
gpio_direction_input(intr_gpio);
/* disable the interrupt and clear the status */
imx_writew(0, brd_io + INTR_MASK_REG);
imx_writew(0xFFFF, brd_io + INTR_RESET_REG);
imx_writew(0, brd_io + INTR_RESET_REG);
imx_writew(0x1F, brd_io + INTR_MASK_REG);
irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
WARN_ON(irq_base < 0);
domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
&irq_domain_simple_ops, NULL);
WARN_ON(!domain);
for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
irq_clear_status_flags(i, IRQ_NOREQUEST);
}
irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW);
irq_set_chained_handler(p_irq, mxc_expio_irq_handler);
/* Register Lan device on the debugboard */
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET);
smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET);
platform_device_register(&smsc_lan9217_device);
return 0;
}
arch/arm/mach-imx/3ds_debugboard.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*/
#ifndef __ASM_ARCH_MXC_3DS_DB_H__
#define __ASM_ARCH_MXC_3DS_DB_H__
extern int __init mxc_expio_init(u32 base, u32 intr_gpio);
#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
arch/arm/mach-imx/Kconfig
View file @ e731f314
This diff is collapsed.
arch/arm/mach-imx/Makefile
View file @ e731f314
# SPDX-License-Identifier: GPL-2.0
obj-y := cpu.o system.o irq-common.o
obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o mach-imx31.o
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o mach-imx35.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
......@@ -37,37 +31,6 @@ obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
endif
# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
# i.MX31 based machines
obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o mx31moboard-smartbot.o
obj-$(CONFIG_MACH_QONG) += mach-qong.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
obj-$(CONFIG_MACH_BUG) += mach-bug.o
obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
......@@ -105,5 +68,3 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
obj-$(CONFIG_SOC_VF610) += mach-vf610.o
obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
obj-y += devices/
arch/arm/mach-imx/board-mx31lilly.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
*
* Based on code for mobots boards,
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
#ifndef __ASSEMBLY__
enum mx31lilly_boards {
MX31LILLY_NOBOARD = 0,
MX31LILLY_DB = 1,
};
/*
* This CPU module needs a baseboard to work. After basic initializing
* its own devices, it calls the baseboard's init function.
*/
extern void mx31lilly_db_init(void);
#endif
#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
arch/arm/mach-imx/board-mx31lite.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
*
* Based on code for mobots boards,
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#ifndef __ASSEMBLY__
enum mx31lite_boards {
MX31LITE_NOBOARD = 0,
MX31LITE_DB = 1,
};
/*
* This CPU module needs a baseboard to work. After basic initializing
* its own devices, it calls the baseboard's init function.
*/
extern void mx31lite_db_init(void);
#endif
#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
arch/arm/mach-imx/board-mx31moboard.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
#ifndef __ASSEMBLY__
enum mx31moboard_boards {
MX31NOBOARD = 0,
MX31DEVBOARD = 1,
MX31MARXBOT = 2,
MX31SMARTBOT = 3,
MX31EYEBOT = 4,
};
/*
* This CPU module needs a baseboard to work. After basic initializing
* its own devices, it calls the baseboard's init function.
*/
extern void mx31moboard_devboard_init(void);
extern void mx31moboard_marxbot_init(void);
extern void mx31moboard_smartbot_init(int board);
#endif
#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */
arch/arm/mach-imx/common.h
View file @ e731f314
......@@ -17,29 +17,14 @@ struct device_node;
enum mxc_cpu_pwr_mode;
struct of_device_id;
void mx21_map_io(void);
void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
void imx21_init_early(void);
void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
void mxc_init_irq(void __iomem *);
void mx21_init_irq(void);
void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
void imx21_soc_init(void);
void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
int mx35_clocks_init(void);
struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
void mxc_set_cpu_type(unsigned int type);
void mxc_restart(enum reboot_mode, const char *);
void mxc_arch_reset_init(void __iomem *);
......
arch/arm/mach-imx/cpu-imx27.c
View file @ e731f314
......@@ -9,6 +9,7 @@
*/
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/module.h>
#include "hardware.h"
......@@ -17,16 +18,23 @@ static int mx27_cpu_rev = -1;
static int mx27_cpu_partnumber;
#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
#define SYSCTRL_OFFSET 0x800 /* Offset from CCM base address */
static int mx27_read_cpu_rev(void)
{
void __iomem *ccm_base;
struct device_node *np;
u32 val;
np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
ccm_base = of_iomap(np, 0);
BUG_ON(!ccm_base);
/*
* now we have access to the IO registers. As we need
* the silicon revision very early we read it here to
* avoid any further hooks
*/
val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID));
val = imx_readl(ccm_base + SYSCTRL_OFFSET + SYS_CHIP_ID);
mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
......
arch/arm/mach-imx/cpu-imx31.c
View file @ e731f314
......@@ -6,6 +6,7 @@
*/
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/io.h>
#include "common.h"
......@@ -32,10 +33,16 @@ static struct {
static int mx31_read_cpu_rev(void)
{
void __iomem *iim_base;
struct device_node *np;
u32 i, srev;
np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
iim_base = of_iomap(np, 0);
BUG_ON(!iim_base);
/* read SREV register from IIM module */
srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
srev = imx_readl(iim_base + MXC_IIMSREV);
srev &= 0xff;
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
......
arch/arm/mach-imx/cpu-imx35.c
View file @ e731f314
......@@ -5,6 +5,7 @@
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*/
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/io.h>
#include "hardware.h"
......@@ -14,9 +15,15 @@ static int mx35_cpu_rev = -1;
static int mx35_read_cpu_rev(void)
{
void __iomem *iim_base;
struct device_node *np;
u32 rev;
rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
iim_base = of_iomap(np, 0);
BUG_ON(!iim_base);
rev = imx_readl(iim_base + MXC_IIMSREV);
switch (rev) {
case 0x00:
return IMX_CHIP_REVISION_1_0;
......
arch/arm/mach-imx/devices-imx21.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "devices/devices-common.h"
extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
#define imx21_add_imx21_hcd(pdata) \
imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
#define imx21_add_imx2_wdt() \
imx_add_imx2_wdt(&imx21_imx2_wdt_data)
extern const struct imx_imx_fb_data imx21_imx_fb_data;
#define imx21_add_imx_fb(pdata) \
imx_add_imx_fb(&imx21_imx_fb_data, pdata)
extern const struct imx_imx_i2c_data imx21_imx_i2c_data;
#define imx21_add_imx_i2c(pdata) \
imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
extern const struct imx_imx_keypad_data imx21_imx_keypad_data;
#define imx21_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
extern const struct imx_imx_ssi_data imx21_imx_ssi_data[];
#define imx21_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[];
#define imx21_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata)
#define imx21_add_imx_uart1(pdata) imx21_add_imx_uart(1, pdata)
#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata)
#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata)
extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[];
#define imx21_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
#define imx21_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
#define imx21_add_mxc_w1() \
imx_add_mxc_w1(&imx21_mxc_w1_data)
extern const struct imx_spi_imx_data imx21_cspi_data[];
#define imx21_add_cspi(id, pdata) \
imx_add_spi_imx(&imx21_cspi_data[id], pdata)
#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata)
#define imx21_add_spi_imx1(pdata) imx21_add_cspi(1, pdata)
arch/arm/mach-imx/devices-imx27.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "devices/devices-common.h"
extern const struct imx_fec_data imx27_fec_data;
#define imx27_add_fec(pdata) \
imx_add_fec(&imx27_fec_data, pdata)
extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
#define imx27_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
extern const struct imx_imx27_coda_data imx27_coda_data;
#define imx27_add_coda() \
imx_add_imx27_coda(&imx27_coda_data)
extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
#define imx27_add_imx2_wdt() \
imx_add_imx2_wdt(&imx27_imx2_wdt_data)
extern const struct imx_imx_fb_data imx27_imx_fb_data;
#define imx27_add_imx_fb(pdata) \
imx_add_imx_fb(&imx27_imx_fb_data, pdata)
extern const struct imx_imx_i2c_data imx27_imx_i2c_data[];
#define imx27_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
extern const struct imx_imx_keypad_data imx27_imx_keypad_data;
#define imx27_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
extern const struct imx_imx_ssi_data imx27_imx_ssi_data[];
#define imx27_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
#define imx27_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata)
#define imx27_add_imx_uart1(pdata) imx27_add_imx_uart(1, pdata)
#define imx27_add_imx_uart2(pdata) imx27_add_imx_uart(2, pdata)
#define imx27_add_imx_uart3(pdata) imx27_add_imx_uart(3, pdata)
#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata)
#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata)
extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
#define imx27_add_mx2_camera(pdata) \
imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data;
#define imx27_add_mx2_emmaprp() \
imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data)
extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
#define imx27_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[];
#define imx27_add_mxc_ehci_hs(id, pdata) \
imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[];
#define imx27_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
#define imx27_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
#define imx27_add_mxc_w1() \
imx_add_mxc_w1(&imx27_mxc_w1_data)
extern const struct imx_spi_imx_data imx27_cspi_data[];
#define imx27_add_cspi(id, gtable) \
imx_add_spi_imx(&imx27_cspi_data[id], gtable)
#define imx27_add_spi_imx0(gtable) imx27_add_cspi(0, gtable)
#define imx27_add_spi_imx1(gtable) imx27_add_cspi(1, gtable)
#define imx27_add_spi_imx2(gtable) imx27_add_cspi(2, gtable)
extern const struct imx_pata_imx_data imx27_pata_imx_data;
#define imx27_add_pata_imx() \
imx_add_pata_imx(&imx27_pata_imx_data)
arch/arm/mach-imx/devices-imx31.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "devices/devices-common.h"
extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
#define imx31_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
#define imx31_add_imx2_wdt() \
imx_add_imx2_wdt(&imx31_imx2_wdt_data)
extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
#define imx31_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata)
#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata)
#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata)
extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
#define imx31_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
#define imx31_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
#define imx31_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata)
#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata)
#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata)
#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata)
#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
extern const struct imx_ipu_core_data imx31_ipu_core_data;
#define imx31_add_ipu_core() \
imx_add_ipu_core(&imx31_ipu_core_data)
#define imx31_alloc_mx3_camera(pdata) \
imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
#define imx31_add_mx3_sdc_fb(pdata) \
imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
#define imx31_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
#define imx31_add_mxc_ehci_hs(id, pdata) \
imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
#define imx31_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
#define imx31_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
#define imx31_add_mxc_rtc() \
imx_add_mxc_rtc(&imx31_mxc_rtc_data)
extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
#define imx31_add_mxc_w1() \
imx_add_mxc_w1(&imx31_mxc_w1_data)
extern const struct imx_spi_imx_data imx31_cspi_data[];
#define imx31_add_cspi(id, gtable) \
imx_add_spi_imx(&imx31_cspi_data[id], gtable)
#define imx31_add_spi_imx0(gtable) imx31_add_cspi(0, gtable)
#define imx31_add_spi_imx1(gtable) imx31_add_cspi(1, gtable)
#define imx31_add_spi_imx2(gtable) imx31_add_cspi(2, gtable)
extern const struct imx_pata_imx_data imx31_pata_imx_data;
#define imx31_add_pata_imx() \
imx_add_pata_imx(&imx31_pata_imx_data)
arch/arm/mach-imx/devices-imx35.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "devices/devices-common.h"
extern const struct imx_fec_data imx35_fec_data;
#define imx35_add_fec(pdata) \
imx_add_fec(&imx35_fec_data, pdata)
extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
#define imx35_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
extern const struct imx_flexcan_data imx35_flexcan_data[];
#define imx35_add_flexcan(id) \
imx_add_flexcan(&imx35_flexcan_data[id])
#define imx35_add_flexcan0() imx35_add_flexcan(0)
#define imx35_add_flexcan1() imx35_add_flexcan(1)
extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
#define imx35_add_imx2_wdt() \
imx_add_imx2_wdt(&imx35_imx2_wdt_data)
extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
#define imx35_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata)
#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata)
#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata)
extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
#define imx35_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
#define imx35_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
#define imx35_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata)
#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata)
#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
extern const struct imx_ipu_core_data imx35_ipu_core_data;
#define imx35_add_ipu_core() \
imx_add_ipu_core(&imx35_ipu_core_data)
#define imx35_alloc_mx3_camera(pdata) \
imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
#define imx35_add_mx3_sdc_fb(pdata) \
imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
#define imx35_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
#define imx35_add_mxc_ehci_hs(pdata) \
imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
#define imx35_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data;
#define imx35_add_mxc_rtc() \
imx_add_mxc_rtc(&imx35_mxc_rtc_data)
extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
#define imx35_add_mxc_w1() \
imx_add_mxc_w1(&imx35_mxc_w1_data)
extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
#define imx35_add_sdhci_esdhc_imx(id, pdata) \
imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
extern const struct imx_spi_imx_data imx35_cspi_data[];
#define imx35_add_cspi(id, pdata) \
imx_add_spi_imx(&imx35_cspi_data[id], pdata)
#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata)
#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata)
extern const struct imx_pata_imx_data imx35_pata_imx_data;
#define imx35_add_pata_imx() \
imx_add_pata_imx(&imx35_pata_imx_data)
arch/arm/mach-imx/devices/Kconfig deleted 100644 → 0
View file @ 1f70935f
# SPDX-License-Identifier: GPL-2.0-only
config IMX_HAVE_PLATFORM_FEC
bool
default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35
config IMX_HAVE_PLATFORM_FLEXCAN
bool
config IMX_HAVE_PLATFORM_FSL_USB2_UDC
bool
config IMX_HAVE_PLATFORM_GPIO_KEYS
bool
config IMX_HAVE_PLATFORM_IMX21_HCD
bool
config IMX_HAVE_PLATFORM_IMX27_CODA
bool
default y if SOC_IMX27
config IMX_HAVE_PLATFORM_IMX2_WDT
bool
config IMX_HAVE_PLATFORM_IMX_FB
bool
config IMX_HAVE_PLATFORM_IMX_I2C
bool
config IMX_HAVE_PLATFORM_IMX_KEYPAD
bool
config IMX_HAVE_PLATFORM_PATA_IMX
bool
config IMX_HAVE_PLATFORM_IMX_SSI
bool
config IMX_HAVE_PLATFORM_IMX_UART
bool
config IMX_HAVE_PLATFORM_IPU_CORE
bool
config IMX_HAVE_PLATFORM_MX2_CAMERA
bool
config IMX_HAVE_PLATFORM_MX2_EMMA
bool
config IMX_HAVE_PLATFORM_MXC_EHCI
bool
config IMX_HAVE_PLATFORM_MXC_MMC
bool
config IMX_HAVE_PLATFORM_MXC_NAND
bool
config IMX_HAVE_PLATFORM_MXC_RTC
bool
config IMX_HAVE_PLATFORM_MXC_W1
bool
config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
bool
config IMX_HAVE_PLATFORM_SPI_IMX
bool
arch/arm/mach-imx/devices/Makefile deleted 100644 → 0
View file @ 1f70935f
# SPDX-License-Identifier: GPL-2.0
obj-y := devices.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
obj-y += platform-gpio-mxc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
obj-y += platform-imx-dma.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o
arch/arm/mach-imx/devices/devices-common.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/gpio/machine.h>
#include <linux/platform_data/dma-imx-sdma.h>
extern struct device mxc_aips_bus;
extern struct device mxc_ahb_bus;
static inline struct platform_device *imx_add_platform_device_dmamask(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data, u64 dmamask)
{
struct platform_device_info pdevinfo = {
.name = name,
.id = id,
.res = res,
.num_res = num_resources,
.data = data,
.size_data = size_data,
.dma_mask = dmamask,
};
return platform_device_register_full(&pdevinfo);
}
static inline struct platform_device *imx_add_platform_device(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data)
{
return imx_add_platform_device_dmamask(
name, id, res, num_resources, data, size_data, 0);
}
#include <linux/fec.h>
struct imx_fec_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_fec(
const struct imx_fec_data *data,
const struct fec_platform_data *pdata);
struct imx_flexcan_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_flexcan(
const struct imx_flexcan_data *data);
#include <linux/fsl_devices.h>
struct imx_fsl_usb2_udc_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_fsl_usb2_udc(
const struct imx_fsl_usb2_udc_data *data,
const struct fsl_usb2_platform_data *pdata);
#include <linux/gpio_keys.h>
struct platform_device *__init imx_add_gpio_keys(
const struct gpio_keys_platform_data *pdata);
#include <linux/platform_data/usb-mx2.h>
struct imx_imx21_hcd_data {
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx21_hcd(
const struct imx_imx21_hcd_data *data,
const struct mx21_usbh_platform_data *pdata);
struct imx_imx27_coda_data {
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx27_coda(
const struct imx_imx27_coda_data *data);
struct imx_imx2_wdt_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
};
struct platform_device *__init imx_add_imx2_wdt(
const struct imx_imx2_wdt_data *data);
struct imx_imxdi_rtc_data {
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_imxdi_rtc(
const struct imx_imxdi_rtc_data *data);
#include <linux/platform_data/video-imxfb.h>
struct imx_imx_fb_data {
const char *devid;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx_fb(
const struct imx_imx_fb_data *data,
const struct imx_fb_platform_data *pdata);
#include <linux/platform_data/i2c-imx.h>
struct imx_imx_i2c_data {
const char *devid;
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata);
#include <linux/input/matrix_keypad.h>
struct imx_imx_keypad_data {
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata);
#include <linux/platform_data/asoc-imx-ssi.h>
struct imx_imx_ssi_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
resource_size_t dmatx0;
resource_size_t dmarx0;
resource_size_t dmatx1;
resource_size_t dmarx1;
};
struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata);
#include <linux/platform_data/serial-imx.h>
struct imx_imx_uart_1irq_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx_uart_1irq(
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata);
#include <linux/platform_data/video-mx3fb.h>
#include <linux/platform_data/media/camera-mx3.h>
struct imx_ipu_core_data {
resource_size_t iobase;
resource_size_t synirq;
resource_size_t errirq;
};
struct platform_device *__init imx_add_ipu_core(
const struct imx_ipu_core_data *data);
struct platform_device *__init imx_alloc_mx3_camera(
const struct imx_ipu_core_data *data,
const struct mx3_camera_pdata *pdata);
struct platform_device *__init imx_add_mx3_sdc_fb(
const struct imx_ipu_core_data *data,
struct mx3fb_platform_data *pdata);
#include <linux/platform_data/media/camera-mx2.h>
struct imx_mx2_camera_data {
const char *devid;
resource_size_t iobasecsi;
resource_size_t iosizecsi;
resource_size_t irqcsi;
resource_size_t iobaseemmaprp;
resource_size_t iosizeemmaprp;
resource_size_t irqemmaprp;
};
struct platform_device *__init imx_add_mx2_camera(
const struct imx_mx2_camera_data *data,
const struct mx2_camera_platform_data *pdata);
struct imx_mx2_emma_data {
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_mx2_emmaprp(
const struct imx_mx2_emma_data *data);
#include <linux/platform_data/usb-ehci-mxc.h>
struct imx_mxc_ehci_data {
int id;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata);
#include <linux/platform_data/mmc-mxcmmc.h>
struct imx_mxc_mmc_data {
const char *devid;
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
resource_size_t dmareq;
};
struct platform_device *__init imx_add_mxc_mmc(
const struct imx_mxc_mmc_data *data,
const struct imxmmc_platform_data *pdata);
#include <linux/platform_data/mtd-mxc_nand.h>
struct imx_mxc_nand_data {
const char *devid;
/*
* id is traditionally 0, but -1 is more appropriate. We use -1 for new
* machines but don't change existing devices as the nand device usually
* appears in the kernel command line to pass its partitioning.
*/
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t axibase;
resource_size_t irq;
};
struct platform_device *__init imx_add_mxc_nand(
const struct imx_mxc_nand_data *data,
const struct mxc_nand_platform_data *pdata);
struct imx_pata_imx_data {
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_pata_imx(
const struct imx_pata_imx_data *data);
/* mxc_rtc */
struct imx_mxc_rtc_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_mxc_rtc(
const struct imx_mxc_rtc_data *data);
/* mxc_w1 */
struct imx_mxc_w1_data {
resource_size_t iobase;
};
struct platform_device *__init imx_add_mxc_w1(
const struct imx_mxc_w1_data *data);
#include <linux/platform_data/mmc-esdhc-imx.h>
struct imx_sdhci_esdhc_imx_data {
const char *devid;
int id;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_sdhci_esdhc_imx(
const struct imx_sdhci_esdhc_imx_data *data,
const struct esdhc_platform_data *pdata);
struct imx_spi_imx_data {
const char *devid;
int id;
resource_size_t iobase;
resource_size_t iosize;
int irq;
};
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable);
struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
int irq);
struct platform_device *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
arch/arm/mach-imx/devices/devices.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include "../common.h"
#include "devices-common.h"
struct device mxc_aips_bus = {
.init_name = "mxc_aips",
};
struct device mxc_ahb_bus = {
.init_name = "mxc_ahb",
};
int __init mxc_device_init(void)
{
int ret;
ret = device_register(&mxc_aips_bus);
if (ret < 0)
goto done;
ret = device_register(&mxc_ahb_bus);
done:
return ret;
}
arch/arm/mach-imx/devices/platform-fec.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include <linux/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_fec_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _FEC_BASE_ADDR, \
.irq = soc ## _INT_FEC, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_fec_data imx27_fec_data __initconst =
imx_fec_data_entry_single(MX27, "imx27-fec");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX35
/* i.mx35 has the i.mx27 type fec */
const struct imx_fec_data imx35_fec_data __initconst =
imx_fec_data_entry_single(MX35, "imx27-fec");
#endif
struct platform_device *__init imx_add_fec(
const struct imx_fec_data *data,
const struct fec_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-flexcan.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \
{ \
.id = _id, \
.iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_CAN ## _hwid, \
}
#define imx_flexcan_data_entry(soc, _id, _hwid, _size) \
[_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX35
const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
#define imx35_flexcan_data_entry(_id, _hwid) \
imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K)
imx35_flexcan_data_entry(0, 1),
imx35_flexcan_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_flexcan(
const struct imx_flexcan_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device("flexcan", data->id,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _USB_OTG_BASE_ADDR, \
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_fsl_usb2_udc(
const struct imx_fsl_usb2_udc_data *data,
const struct fsl_usb2_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask(data->devid, -1,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-gpio-mxc.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2011 Linaro Limited
*/
#include "devices-common.h"
#include "../common.h"
struct platform_device *__init mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
{
struct resource res[] = {
{
.start = iobase,
.end = iobase + iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = irq,
.end = irq,
.flags = IORESOURCE_IRQ,
}, {
.start = irq_high,
.end = irq_high,
.flags = IORESOURCE_IRQ,
},
};
unsigned int nres;
nres = irq_high ? ARRAY_SIZE(res) : ARRAY_SIZE(res) - 1;
return platform_device_register_resndata(&mxc_aips_bus, name, id, res, nres, NULL, 0);
}
arch/arm/mach-imx/devices/platform-gpio_keys.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*/
#include <linux/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
struct platform_device *__init imx_add_gpio_keys(
const struct gpio_keys_platform_data *pdata)
{
return imx_add_platform_device("gpio-keys", -1, NULL,
0, pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx-dma.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "devices-common.h"
struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
resource_size_t iobase, int irq)
{
struct resource res[] = {
{
.start = iobase,
.end = iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = irq,
.end = irq,
.flags = IORESOURCE_IRQ,
},
};
return platform_device_register_resndata(&mxc_ahb_bus,
name, -1, res, ARRAY_SIZE(res), NULL, 0);
}
struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata)
{
struct resource res[] = {
{
.start = iobase,
.end = iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = irq,
.end = irq,
.flags = IORESOURCE_IRQ,
},
};
return platform_device_register_resndata(&mxc_ahb_bus, name,
-1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx-fb.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_fb_data_entry_single(soc, _devid, _size) \
{ \
.devid = _devid, \
.iobase = soc ## _LCDC_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_LCDC, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
struct platform_device *__init imx_add_imx_fb(
const struct imx_imx_fb_data *data,
const struct imx_fb_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-imx-i2c.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \
{ \
.devid = _devid, \
.id = _id, \
.iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_I2C ## _hwid, \
}
#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \
[_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
#define imx27_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K)
imx27_imx_i2c_data_entry(0, 1),
imx27_imx_i2c_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
#define imx31_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K)
imx31_imx_i2c_data_entry(0, 1),
imx31_imx_i2c_data_entry(1, 2),
imx31_imx_i2c_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
#define imx35_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K)
imx35_imx_i2c_data_entry(0, 1),
imx35_imx_i2c_data_entry(1, 2),
imx35_imx_i2c_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx-keypad.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_keypad_data_entry_single(soc, _size) \
{ \
.iobase = soc ## _KPP_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_KPP, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX21, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX27, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX31, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX35, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device("imx-keypad", -1,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx-ssi.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \
[_id] = { \
.id = _id, \
.iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_SSI ## _hwid, \
.dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \
.dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \
.dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \
.dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
#define imx21_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K)
imx21_imx_ssi_data_entry(0, 1),
imx21_imx_ssi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
#define imx27_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K)
imx27_imx_ssi_data_entry(0, 1),
imx27_imx_ssi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
#define imx31_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
imx31_imx_ssi_data_entry(0, 1),
imx31_imx_ssi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
#define imx35_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
imx35_imx_ssi_data_entry(0, 1),
imx35_imx_ssi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
#define DMARES(_name) { \
.name = #_name, \
.start = data->dma ## _name, \
.end = data->dma ## _name, \
.flags = IORESOURCE_DMA, \
}
DMARES(tx0),
DMARES(rx0),
DMARES(tx1),
DMARES(rx1),
};
return imx_add_platform_device("imx-ssi", data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx-uart.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \
[_id] = { \
.id = _id, \
.iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irqrx = soc ## _INT_UART ## _hwid ## RX, \
.irqtx = soc ## _INT_UART ## _hwid ## TX, \
.irqrts = soc ## _INT_UART ## _hwid ## RTS, \
}
#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \
[_id] = { \
.id = _id, \
.iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_UART ## _hwid, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
#define imx21_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K)
imx21_imx_uart_data_entry(0, 1),
imx21_imx_uart_data_entry(1, 2),
imx21_imx_uart_data_entry(2, 3),
imx21_imx_uart_data_entry(3, 4),
};
#endif
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
#define imx27_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K)
imx27_imx_uart_data_entry(0, 1),
imx27_imx_uart_data_entry(1, 2),
imx27_imx_uart_data_entry(2, 3),
imx27_imx_uart_data_entry(3, 4),
imx27_imx_uart_data_entry(4, 5),
imx27_imx_uart_data_entry(5, 6),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
#define imx31_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
imx31_imx_uart_data_entry(0, 1),
imx31_imx_uart_data_entry(1, 2),
imx31_imx_uart_data_entry(2, 3),
imx31_imx_uart_data_entry(3, 4),
imx31_imx_uart_data_entry(4, 5),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
#define imx35_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
imx35_imx_uart_data_entry(0, 1),
imx35_imx_uart_data_entry(1, 2),
imx35_imx_uart_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_imx_uart_1irq(
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
/* i.mx21 type uart runs on all i.mx except i.mx1 */
return imx_add_platform_device("imx21-uart", data->id,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx2-wdt.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \
{ \
.id = _id, \
.iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
}
#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size) \
[_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX21
const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_imx2_wdt(
const struct imx_imx2_wdt_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
},
};
return imx_add_platform_device("imx2-wdt", data->id,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-imx21-hcd.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx21_hcd_data_entry_single(soc) \
{ \
.iobase = soc ## _USBOTG_BASE_ADDR, \
.irq = soc ## _INT_USBHOST, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst =
imx_imx21_hcd_data_entry_single(MX21);
#endif /* ifdef CONFIG_SOC_IMX21 */
struct platform_device *__init imx_add_imx21_hcd(
const struct imx_imx21_hcd_data *data,
const struct mx21_usbh_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("imx21-hcd", 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-imx27-coda.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Vista Silicon
* Javier Martin <javier.martin@vista-silicon.com>
*/
#include "../hardware.h"
#include "devices-common.h"
#ifdef CONFIG_SOC_IMX27
const struct imx_imx27_coda_data imx27_coda_data __initconst = {
.iobase = MX27_VPU_BASE_ADDR,
.iosize = SZ_512,
.irq = MX27_INT_VPU,
};
#endif
struct platform_device *__init imx_add_imx27_coda(
const struct imx_imx27_coda_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("coda-imx27", 0, res, 2, NULL,
0, DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-ipu-core.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2011 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_ipu_core_entry_single(soc) \
{ \
.iobase = soc ## _IPU_CTRL_BASE_ADDR, \
.synirq = soc ## _INT_IPU_SYN, \
.errirq = soc ## _INT_IPU_ERR, \
}
#ifdef CONFIG_SOC_IMX31
const struct imx_ipu_core_data imx31_ipu_core_data __initconst =
imx_ipu_core_entry_single(MX31);
#endif
#ifdef CONFIG_SOC_IMX35
const struct imx_ipu_core_data imx35_ipu_core_data __initconst =
imx_ipu_core_entry_single(MX35);
#endif
static struct platform_device *imx_ipu_coredev __initdata;
struct platform_device *__init imx_add_ipu_core(
const struct imx_ipu_core_data *data)
{
/* The resource order is important! */
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + 0x5f,
.flags = IORESOURCE_MEM,
}, {
.start = data->iobase + 0x88,
.end = data->iobase + 0xb3,
.flags = IORESOURCE_MEM,
}, {
.start = data->synirq,
.end = data->synirq,
.flags = IORESOURCE_IRQ,
}, {
.start = data->errirq,
.end = data->errirq,
.flags = IORESOURCE_IRQ,
},
};
return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
res, ARRAY_SIZE(res), NULL, 0);
}
struct platform_device *__init imx_alloc_mx3_camera(
const struct imx_ipu_core_data *data,
const struct mx3_camera_pdata *pdata)
{
struct resource res[] = {
{
.start = data->iobase + 0x60,
.end = data->iobase + 0x87,
.flags = IORESOURCE_MEM,
},
};
int ret = -ENOMEM;
struct platform_device *pdev;
if (IS_ERR_OR_NULL(imx_ipu_coredev))
return ERR_PTR(-ENODEV);
pdev = platform_device_alloc("mx3-camera", 0);
if (!pdev)
return ERR_PTR(-ENOMEM);
pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
if (!pdev->dev.dma_mask)
goto err;
*pdev->dev.dma_mask = DMA_BIT_MASK(32);
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret)
goto err;
if (pdata) {
struct mx3_camera_pdata *copied_pdata;
ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
if (ret) {
err:
kfree(pdev->dev.dma_mask);
platform_device_put(pdev);
return ERR_PTR(-ENODEV);
}
copied_pdata = dev_get_platdata(&pdev->dev);
copied_pdata->dma_dev = &imx_ipu_coredev->dev;
}
return pdev;
}
struct platform_device *__init imx_add_mx3_sdc_fb(
const struct imx_ipu_core_data *data,
struct mx3fb_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase + 0xb4,
.end = data->iobase + 0x1bf,
.flags = IORESOURCE_MEM,
},
};
if (IS_ERR_OR_NULL(imx_ipu_coredev))
return ERR_PTR(-ENODEV);
pdata->dma_dev = &imx_ipu_coredev->dev;
return imx_add_platform_device_dmamask("mx3_sdc_fb", -1,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-mx2-camera.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_mx2_camera_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobasecsi = soc ## _CSI_BASE_ADDR, \
.iosizecsi = SZ_4K, \
.irqcsi = soc ## _INT_CSI, \
}
#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \
{ \
.devid = _devid, \
.iobasecsi = soc ## _CSI_BASE_ADDR, \
.iosizecsi = SZ_32, \
.irqcsi = soc ## _INT_CSI, \
.iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR, \
.iosizeemmaprp = SZ_32, \
.irqemmaprp = soc ## _INT_EMMAPRP, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
#endif /* ifdef CONFIG_SOC_IMX27 */
struct platform_device *__init imx_add_mx2_camera(
const struct imx_mx2_camera_data *data,
const struct mx2_camera_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobasecsi,
.end = data->iobasecsi + data->iosizecsi - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irqcsi,
.end = data->irqcsi,
.flags = IORESOURCE_IRQ,
}, {
.start = data->iobaseemmaprp,
.end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irqemmaprp,
.end = data->irqemmaprp,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask(data->devid, 0,
res, data->iobaseemmaprp ? 4 : 2,
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-mx2-emma.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_mx2_emmaprp_data_entry_single(soc) \
{ \
.iobase = soc ## _EMMAPRP_BASE_ADDR, \
.iosize = SZ_256, \
.irq = soc ## _INT_EMMAPRP, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst =
imx_mx2_emmaprp_data_entry_single(MX27);
#endif /* ifdef CONFIG_SOC_IMX27 */
struct platform_device *__init imx_add_mx2_emmaprp(
const struct imx_mx2_emma_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
res, 2, NULL, 0, DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-mxc-ehci.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \
{ \
.id = _id, \
.iobase = soc ## _USB_ ## hs ## _BASE_ADDR, \
.irq = soc ## _INT_USB_ ## hs, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = {
imx_mxc_ehci_data_entry_single(MX27, 1, HS1),
imx_mxc_ehci_data_entry_single(MX27, 2, HS2),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX31, 0, OTG);
const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = {
imx_mxc_ehci_data_entry_single(MX31, 1, HS1),
imx_mxc_ehci_data_entry_single(MX31, 2, HS2),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX35, 0, OTG);
const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
imx_mxc_ehci_data_entry_single(MX35, 1, HS);
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("mxc-ehci", data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-mxc-mmc.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \
{ \
.devid = _devid, \
.id = _id, \
.iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_SDHC ## _hwid, \
.dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \
}
#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \
[_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX21
const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
#define imx21_mxc_mmc_data_entry(_id, _hwid) \
imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K)
imx21_mxc_mmc_data_entry(0, 1),
imx21_mxc_mmc_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
#define imx27_mxc_mmc_data_entry(_id, _hwid) \
imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K)
imx27_mxc_mmc_data_entry(0, 1),
imx27_mxc_mmc_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
#define imx31_mxc_mmc_data_entry(_id, _hwid) \
imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K)
imx31_mxc_mmc_data_entry(0, 1),
imx31_mxc_mmc_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
struct platform_device *__init imx_add_mxc_mmc(
const struct imx_mxc_mmc_data *data,
const struct imxmmc_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
}, {
.start = data->dmareq,
.end = data->dmareq,
.flags = IORESOURCE_DMA,
},
};
return imx_add_platform_device_dmamask(data->devid, data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-mxc_nand.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \
{ \
.devid = _devid, \
.iobase = soc ## _NFC_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_NFC \
}
#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \
{ \
.devid = _devid, \
.id = -1, \
.iobase = soc ## _NFC_BASE_ADDR, \
.iosize = _size, \
.axibase = soc ## _NFC_AXI_BASE_ADDR, \
.irq = soc ## _INT_NFC \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K);
#endif
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
#endif
struct platform_device *__init imx_add_mxc_nand(
const struct imx_mxc_nand_data *data,
const struct mxc_nand_platform_data *pdata)
{
/* AXI has to come first, that's how the mxc_nand driver expect it */
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
}, {
.start = data->axibase,
.end = data->axibase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
};
return imx_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res) - !data->axibase,
pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-mxc_rtc.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010-2011 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_rtc_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _RTC_BASE_ADDR, \
.irq = soc ## _INT_RTC, \
}
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst =
imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc");
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_mxc_rtc(
const struct imx_mxc_rtc_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device(data->devid, -1,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-mxc_w1.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_w1_data_entry_single(soc) \
{ \
.iobase = soc ## _OWIRE_BASE_ADDR, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst =
imx_mxc_w1_data_entry_single(MX21);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst =
imx_mxc_w1_data_entry_single(MX27);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst =
imx_mxc_w1_data_entry_single(MX31);
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst =
imx_mxc_w1_data_entry_single(MX35);
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_mxc_w1(
const struct imx_mxc_w1_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
return imx_add_platform_device("mxc_w1", 0,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-pata_imx.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
#include "../hardware.h"
#include "devices-common.h"
#define imx_pata_imx_data_entry_single(soc, _size) \
{ \
.iobase = soc ## _ATA_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_ATA, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_pata_imx_data imx27_pata_imx_data __initconst =
imx_pata_imx_data_entry_single(MX27, SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_pata_imx_data imx31_pata_imx_data __initconst =
imx_pata_imx_data_entry_single(MX31, SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
imx_pata_imx_data_entry_single(MX35, SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_pata_imx(
const struct imx_pata_imx_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
},
{
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device("pata_imx", -1,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
*/
#include <linux/platform_data/mmc-esdhc-imx.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
{ \
.devid = _devid, \
.id = _id, \
.iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \
.irq = soc ## _INT_ESDHC ## hwid, \
}
#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \
[id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid)
#ifdef CONFIG_SOC_IMX35
const struct imx_sdhci_esdhc_imx_data
imx35_sdhci_esdhc_imx_data[] __initconst = {
#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \
imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid)
imx35_sdhci_esdhc_imx_data_entry(0, 1),
imx35_sdhci_esdhc_imx_data_entry(1, 2),
imx35_sdhci_esdhc_imx_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
.wp_type = ESDHC_WP_NONE,
.cd_type = ESDHC_CD_NONE,
};
struct platform_device *__init imx_add_sdhci_esdhc_imx(
const struct imx_sdhci_esdhc_imx_data *data,
const struct esdhc_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
/*
* If machine does not provide pdata, use the default one
* which means no WP/CD support
*/
if (!pdata)
pdata = &default_esdhc_pdata;
return imx_add_platform_device_dmamask(data->devid, data->id, res,
ARRAY_SIZE(res), pdata, sizeof(*pdata),
DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-spi_imx.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/gpio/machine.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
{ \
.devid = _devid, \
.id = _id, \
.iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_ ## type ## hwid, \
}
#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \
[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
#ifdef CONFIG_SOC_IMX21
const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
#define imx21_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
imx21_cspi_data_entry(0, 1),
imx21_cspi_data_entry(1, 2),
};
#endif
#ifdef CONFIG_SOC_IMX27
const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
#define imx27_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K)
imx27_cspi_data_entry(0, 1),
imx27_cspi_data_entry(1, 2),
imx27_cspi_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
#define imx31_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
imx31_cspi_data_entry(0, 1),
imx31_cspi_data_entry(1, 2),
imx31_cspi_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
#define imx35_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
imx35_cspi_data_entry(0, 1),
imx35_cspi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
if (gtable)
gpiod_add_lookup_table(gtable);
return imx_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/ehci-imx27.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX27_OTG_SIC_SHIFT 29
#define MX27_OTG_SIC_MASK (0x3 << MX27_OTG_SIC_SHIFT)
#define MX27_OTG_PM_BIT (1 << 24)
#define MX27_H2_SIC_SHIFT 21
#define MX27_H2_SIC_MASK (0x3 << MX27_H2_SIC_SHIFT)
#define MX27_H2_PM_BIT (1 << 16)
#define MX27_H2_DT_BIT (1 << 5)
#define MX27_H1_SIC_SHIFT 13
#define MX27_H1_SIC_MASK (0x3 << MX27_H1_SIC_SHIFT)
#define MX27_H1_PM_BIT (1 << 8)
#define MX27_H1_DT_BIT (1 << 4)
int mx27_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX27_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX27_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX27_H1_DT_BIT;
break;
case 2: /* H2 port */
v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX27_H2_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX27_H2_DT_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}
arch/arm/mach-imx/ehci-imx31.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX31_OTG_SIC_SHIFT 29
#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
#define MX31_OTG_PM_BIT (1 << 24)
#define MX31_H2_SIC_SHIFT 21
#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
#define MX31_H2_PM_BIT (1 << 16)
#define MX31_H2_DT_BIT (1 << 5)
#define MX31_H1_SIC_SHIFT 13
#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
#define MX31_H1_PM_BIT (1 << 8)
#define MX31_H1_DT_BIT (1 << 4)
int mx31_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H1_DT_BIT;
break;
case 2: /* H2 port */
v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H2_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H2_DT_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}
arch/arm/mach-imx/ehci-imx35.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX35_OTG_SIC_SHIFT 29
#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
#define MX35_OTG_PM_BIT (1 << 24)
#define MX35_OTG_PP_BIT (1 << 11)
#define MX35_OTG_OCPOL_BIT (1 << 3)
#define MX35_H1_SIC_SHIFT 21
#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
#define MX35_H1_PP_BIT (1 << 18)
#define MX35_H1_PM_BIT (1 << 16)
#define MX35_H1_IPPUE_UP_BIT (1 << 7)
#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX35_H1_TLL_BIT (1 << 5)
#define MX35_H1_USBTE_BIT (1 << 4)
#define MX35_H1_OCPOL_BIT (1 << 2)
int mx35_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
MX35_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_OTG_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX35_OTG_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX35_OTG_OCPOL_BIT;
break;
case 1: /* H1 port */
v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT |
MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_H1_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX35_H1_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX35_H1_OCPOL_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX35_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX35_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX35_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX35_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}
arch/arm/mach-imx/ehci.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __MACH_IMX_EHCI_H
#define __MACH_IMX_EHCI_H
/* values for portsc field */
#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
#define MXC_EHCI_FORCE_FS (1 << 24)
#define MXC_EHCI_UTMI_8BIT (0 << 28)
#define MXC_EHCI_UTMI_16BIT (1 << 28)
#define MXC_EHCI_SERIAL (1 << 29)
#define MXC_EHCI_MODE_UTMI (0 << 30)
#define MXC_EHCI_MODE_PHILIPS (1 << 30)
#define MXC_EHCI_MODE_ULPI (2 << 30)
#define MXC_EHCI_MODE_SERIAL (3 << 30)
/* values for flags field */
#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
#define MXC_EHCI_INTERFACE_MASK (0xf)
#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
#define MXC_EHCI_TTL_ENABLED (1 << 8)
#define MXC_EHCI_INTERNAL_PHY (1 << 9)
#define MXC_EHCI_IPPUE_DOWN (1 << 10)
#define MXC_EHCI_IPPUE_UP (1 << 11)
#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
#define MXC_USBCTRL_OFFSET 0
#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
#define MXC_USBH2CTRL_OFFSET 0x14
int mx25_initialize_usb_hw(int port, unsigned int flags);
int mx31_initialize_usb_hw(int port, unsigned int flags);
int mx35_initialize_usb_hw(int port, unsigned int flags);
int mx27_initialize_usb_hw(int port, unsigned int flags);
#endif /* __MACH_IMX_EHCI_H */
arch/arm/mach-imx/hardware.h
View file @ e731f314
......@@ -97,7 +97,6 @@
#include "mx31.h"
#include "mx35.h"
#include "mx2x.h"
#include "mx21.h"
#include "mx27.h"
#define imx_map_entry(soc, name, _type) { \
......
arch/arm/mach-imx/imx27-dt.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2012 Sascha Hauer, Pengutronix
*/
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
#include "mx27.h"
static const char * const imx27_dt_board_compat[] __initconst = {
"fsl,imx27",
NULL
};
DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.init_late = imx27_pm_init,
.dt_compat = imx27_dt_board_compat,
MACHINE_END
arch/arm/mach-imx/iomux-imx31.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
* Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include "hardware.h"
#include "iomux-mx3.h"
/*
* IOMUX register (base) addresses
*/
#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
#define IOMUXGPR (IOMUX_BASE + 0x008)
#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C)
#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154)
static DEFINE_SPINLOCK(gpio_mux_lock);
#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
static DECLARE_BITMAP(mxc_pin_alloc_map, NB_PORTS * 32);
/*
* set the mode for a IOMUX pin.
*/
void mxc_iomux_mode(unsigned int pin_mode)
{
u32 field;
u32 l;
u32 mode;
void __iomem *reg;
reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
field = pin_mode & 0x3;
mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
spin_lock(&gpio_mux_lock);
l = imx_readl(reg);
l &= ~(0xff << (field * 8));
l |= mode << (field * 8);
imx_writel(l, reg);
spin_unlock(&gpio_mux_lock);
}
/*
* This function configures the pad value for a IOMUX pin.
*/
void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
{
u32 field, l;
void __iomem *reg;
pin &= IOMUX_PADNUM_MASK;
reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
field = (pin + 2) % 3;
pr_debug("%s: reg offset = 0x%x, field = %d\n",
__func__, (pin + 2) / 3, field);
spin_lock(&gpio_mux_lock);
l = imx_readl(reg);
l &= ~(0x1ff << (field * 10));
l |= config << (field * 10);
imx_writel(l, reg);
spin_unlock(&gpio_mux_lock);
}
/*
* allocs a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
*/
int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
if (pad >= (PIN_MAX + 1)) {
printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n",
pad, label ? label : "?");
return -EINVAL;
}
if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
pad, label ? label : "?");
return -EBUSY;
}
mxc_iomux_mode(pin);
return 0;
}
int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
const char *label)
{
const unsigned int *p = pin_list;
int i;
int ret = -EINVAL;
for (i = 0; i < count; i++) {
ret = mxc_iomux_alloc_pin(*p, label);
if (ret)
goto setup_error;
p++;
}
return 0;
setup_error:
mxc_iomux_release_multiple_pins(pin_list, i);
return ret;
}
void mxc_iomux_release_pin(unsigned int pin)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
if (pad < (PIN_MAX + 1))
clear_bit(pad, mxc_pin_alloc_map);
}
void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
{
const unsigned int *p = pin_list;
int i;
for (i = 0; i < count; i++) {
mxc_iomux_release_pin(*p);
p++;
}
}
/*
* This function enables/disables the general purpose function for a particular
* signal.
*/
void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
{
u32 l;
spin_lock(&gpio_mux_lock);
l = imx_readl(IOMUXGPR);
if (en)
l |= gp;
else
l &= ~gp;
imx_writel(l, IOMUXGPR);
spin_unlock(&gpio_mux_lock);
}
arch/arm/mach-imx/iomux-mx21.h deleted 100644 → 0
View file @ 1f70935f
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
*/
#ifndef __MACH_IOMUX_MX21_H__
#define __MACH_IOMUX_MX21_H__
#include "iomux-mx2x.h"
#include "iomux-v1.h"
/* Primary GPIO pin functions */
#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22)
#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25)
#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5)
#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6)
#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7)
#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8)
#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9)
#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10)
#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11)
#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12)
#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13)
#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16)
#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17)
#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18)
#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19)
#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0)
#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1)
#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2)
#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1)
#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3)
#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7)
#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8)
#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9)
#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10)
#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11)
#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12)
#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13)
#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14)
#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16)
/* Alternate GPIO pin functions */
#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5)
#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6)
#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7)
#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8)
#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9)
#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10)
#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11)
#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12)
#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13)
#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14)
#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15)
#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16)
#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17)
#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18)
#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19)
#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20)
#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21)
#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22)
#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23)
#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29)
#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30)
/* AIN GPIO pin functions */
#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
/* BIN GPIO pin functions */
#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
/* CIN GPIO pin functions */
#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
/* AOUT GPIO pin functions */
#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
#endif /* ifndef __MACH_IOMUX_MX21_H__ */
arch/arm/mach-imx/iomux-mx27.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/iomux-mx2x.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/iomux-mx3.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/iomux-mx35.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/iomux-v1.c deleted 100644 → 0
View file @ 1f70935f
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* arch/arm/plat-mxc/iomux-v1.c
*
* Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
* Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
*
* Common code for i.MX1, i.MX21 and i.MX27
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/gpio.h>
#include <asm/mach/map.h>
#include "hardware.h"
#include "iomux-v1.h"
static void __iomem *imx_iomuxv1_baseaddr;
static unsigned imx_iomuxv1_numports;
static inline unsigned long imx_iomuxv1_readl(unsigned offset)
{
return imx_readl(imx_iomuxv1_baseaddr + offset);
}
static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
{
imx_writel(val, imx_iomuxv1_baseaddr + offset);
}
static inline void imx_iomuxv1_rmwl(unsigned offset,
unsigned long mask, unsigned long value)
{
unsigned long reg = imx_iomuxv1_readl(offset);
reg &= ~mask;
reg |= value;
imx_iomuxv1_writel(reg, offset);
}
static inline void imx_iomuxv1_set_puen(
unsigned int port, unsigned int pin, int on)
{
unsigned long mask = 1 << pin;
imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
}
static inline void imx_iomuxv1_set_ddir(
unsigned int port, unsigned int pin, int out)
{
unsigned long mask = 1 << pin;
imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
}
static inline void imx_iomuxv1_set_gpr(
unsigned int port, unsigned int pin, int af)
{
unsigned long mask = 1 << pin;
imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
}
static inline void imx_iomuxv1_set_gius(
unsigned int port, unsigned int pin, int inuse)
{
unsigned long mask = 1 << pin;
imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
}
static inline void imx_iomuxv1_set_ocr(
unsigned int port, unsigned int pin, unsigned int ocr)
{
unsigned long shift = (pin & 0xf) << 1;
unsigned long mask = 3 << shift;
unsigned long value = ocr << shift;
unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
imx_iomuxv1_rmwl(offset, mask, value);
}
static inline void imx_iomuxv1_set_iconfa(
unsigned int port, unsigned int pin, unsigned int aout)
{
unsigned long shift = (pin & 0xf) << 1;
unsigned long mask = 3 << shift;
unsigned long value = aout << shift;
unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
imx_iomuxv1_rmwl(offset, mask, value);
}
static inline void imx_iomuxv1_set_iconfb(
unsigned int port, unsigned int pin, unsigned int bout)
{
unsigned long shift = (pin & 0xf) << 1;
unsigned long mask = 3 << shift;
unsigned long value = bout << shift;
unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
imx_iomuxv1_rmwl(offset, mask, value);
}
int mxc_gpio_mode(int gpio_mode)
{
unsigned int pin = gpio_mode & GPIO_PIN_MASK;
unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
if (port >= imx_iomuxv1_numports)
return -EINVAL;
/* Pullup enable */
imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
/* Data direction */
imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
/* Primary / alternate function */
imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
/* use as gpio? */
imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
imx_iomuxv1_set_ocr(port, pin, ocr);
imx_iomuxv1_set_iconfa(port, pin, aout);
imx_iomuxv1_set_iconfb(port, pin, bout);
return 0;
}
static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
{
size_t i;
int ret = 0;
for (i = 0; i < count; ++i) {
ret = mxc_gpio_mode(list[i]);
if (ret)
return ret;
}
return ret;
}
int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
const char *label)
{
int ret;
ret = imx_iomuxv1_setup_multiple(pin_list, count);
return ret;
}
int __init imx_iomuxv1_init(void __iomem *base, int numports)
{
imx_iomuxv1_baseaddr = base;
imx_iomuxv1_numports = numports;
return 0;
}
arch/arm/mach-imx/iomux-v1.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/iomux-v3.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/iomux-v3.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-armadillo5x0.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-bug.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-imx27_visstrim_m10.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-imx7ulp.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-imx/mach-kzm_arm11_01.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-mx21ads.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-mx27_3ds.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-mx27ads.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-mx31_3ds.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-mx31ads.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-mx31lilly.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-mx31lite.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-mx31moboard.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-mx35_3ds.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-pca100.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-pcm037.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-pcm037_eet.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-pcm043.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-qong.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mach-vpr200.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mm-imx21.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mm-imx3.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-imx/mx21.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mx27.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-imx/mx31.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-imx/mx31lilly-db.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mx31lite-db.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mx31moboard-devboard.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mx31moboard-marxbot.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mx31moboard-smartbot.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/mx35.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-imx/pcm037.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-imx/pm-imx27.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-imx/ulpi.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-mstar/Kconfig
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap1/include/mach/mux.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/Kconfig
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/am33xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/board-generic.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/clockdomains33xx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/clockdomains81xx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/cm-regbits-33xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/cm-regbits-54xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/cm-regbits-7xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/cm1_54xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/cm1_7xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/cm2_54xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/cm2_7xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/cm33xx.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/cm33xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/cm81xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/display.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/dma.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/l3_2xxx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/l3_3xxx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/l4_2xxx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/omap-iommu.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_33xx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_43xx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_54xx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_81xx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/omap_opp_data.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/omap_phy_internal.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/opp3xxx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/opp4xxx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/pm-debug.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/pm.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/pm.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/pm33xx-core.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/pm34xx.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/powerdomains33xx_data.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/prcm43xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/prcm_mpu54xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/prcm_mpu7xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/prm-regbits-33xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/prm33xx.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/prm33xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/prm54xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/prm7xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/scrm54xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/sleep33xx.S
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/sleep43xx.S
View file @ e731f314
This diff is collapsed.
arch/arm/mach-omap2/ti81xx.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/dma.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/gpio-samsung.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/include/mach/io-s3c24xx.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/include/mach/io.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/include/mach/irqs.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/map.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/pm-common.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/pm-core.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/regs-clock.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/regs-gpio.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c/regs-irq.h 0 → 100644
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s3c24xx/include/mach/fb.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-s3c24xx/include/mach/io.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-s3c24xx/setup-camif.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-s3c64xx/include/mach/hardware.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-s3c64xx/watchdog-reset.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/mach-s5pv210/Kconfig
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s5pv210/Makefile
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s5pv210/pm.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s5pv210/regs-clock.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-s5pv210/s5pv210.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-shmobile/rcar-gen2.h
View file @ e731f314
This diff is collapsed.
arch/arm/mach-shmobile/setup-rcar-gen2.c
View file @ e731f314
This diff is collapsed.
arch/arm/mach-stm32/Makefile.boot
View file @ e731f314
This diff is collapsed.
arch/arm/plat-samsung/include/plat/samsung-time.h deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm/plat-samsung/watchdog-reset.c deleted 100644 → 0
View file @ 1f70935f
This diff is collapsed.
arch/arm64/Kconfig.platforms
View file @ e731f314
This diff is collapsed.
drivers/clk/imx/clk-imx27.c
View file @ e731f314
This diff is collapsed.
drivers/clk/imx/clk-imx31.c
View file @ e731f314
This diff is collapsed.
drivers/clk/imx/clk-imx35.c
View file @ e731f314
This diff is collapsed.
drivers/clk/samsung/clk-s3c2410-dclk.c
View file @ e731f314
This diff is collapsed.
drivers/clk/samsung/clk-s3c2410.c
View file @ e731f314
This diff is collapsed.
drivers/clk/samsung/clk-s3c2412.c
View file @ e731f314
This diff is collapsed.
drivers/clk/samsung/clk-s3c2443.c
View file @ e731f314
This diff is collapsed.
drivers/clk/samsung/clk-s3c64xx.c
View file @ e731f314
This diff is collapsed.
drivers/cpufreq/Kconfig.arm
View file @ e731f314
This diff is collapsed.
drivers/cpufreq/s3c2410-cpufreq.c
View file @ e731f314
This diff is collapsed.
drivers/cpufreq/s3c2412-cpufreq.c
View file @ e731f314
This diff is collapsed.
drivers/cpufreq/s3c2440-cpufreq.c
View file @ e731f314
This diff is collapsed.
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
View file @ e731f314
This diff is collapsed.
drivers/cpufreq/s3c24xx-cpufreq.c
View file @ e731f314
This diff is collapsed.
drivers/hwmon/s3c-hwmon.c
View file @ e731f314
This diff is collapsed.
drivers/input/touchscreen/s3c2410_ts.c
View file @ e731f314
This diff is collapsed.
drivers/irqchip/Makefile
View file @ e731f314
This diff is collapsed.
drivers/mmc/host/Kconfig
View file @ e731f314
This diff is collapsed.
drivers/mmc/host/s3cmci.c
View file @ e731f314
This diff is collapsed.
drivers/power/supply/s3c_adc_battery.c
View file @ e731f314
This diff is collapsed.
drivers/pwm/Kconfig
View file @ e731f314
This diff is collapsed.
drivers/soc/samsung/Kconfig
View file @ e731f314
This diff is collapsed.
drivers/soc/samsung/Makefile
View file @ e731f314
This diff is collapsed.
drivers/soc/ti/omap_prm.c
View file @ e731f314
This diff is collapsed.
drivers/soc/ti/pm33xx.c
View file @ e731f314
This diff is collapsed.
drivers/soc/versatile/soc-integrator.c
View file @ e731f314
This diff is collapsed.
drivers/spi/Kconfig
View file @ e731f314
This diff is collapsed.
drivers/spi/Makefile
View file @ e731f314
This diff is collapsed.
drivers/spi/spi-s3c24xx.c
View file @ e731f314
This diff is collapsed.
drivers/tty/serial/Kconfig
View file @ e731f314
This diff is collapsed.
drivers/usb/gadget/udc/s3c-hsudc.c
View file @ e731f314
This diff is collapsed.
drivers/usb/gadget/udc/s3c2410_udc.c
View file @ e731f314
This diff is collapsed.
drivers/usb/gadget/udc/s3c2410_udc.h
View file @ e731f314
This diff is collapsed.
drivers/video/fbdev/s3c2410fb.c
View file @ e731f314
This diff is collapsed.
drivers/watchdog/Kconfig
View file @ e731f314
This diff is collapsed.
include/linux/clk/samsung.h 0 → 100644
View file @ e731f314
This diff is collapsed.
include/linux/platform_data/clk-s3c2410.h 0 → 100644
View file @ e731f314
This diff is collapsed.
include/linux/platform_data/mmc-s3cmci.h
View file @ e731f314
This diff is collapsed.
include/linux/platform_data/pm33xx.h
View file @ e731f314
This diff is collapsed.
include/linux/platform_data/s3c-hsudc.h
View file @ e731f314
This diff is collapsed.
include/linux/spi/s3c24xx.h
View file @ e731f314
This diff is collapsed.
include/media/drv-intf/s3c_camif.h
View file @ e731f314
This diff is collapsed.
sound/soc/samsung/Kconfig
View file @ e731f314
This diff is collapsed.
sound/soc/samsung/s3c2412-i2s.c
View file @ e731f314
This diff is collapsed.
sound/soc/samsung/s3c24xx-i2s.c
View file @ e731f314
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7