Commit e78d5b8f authored by Prakash, Sathya's avatar Prakash, Sathya Committed by James Bottomley

[SCSI] mpt fusion: Request I/O resources only when required

This patch modifies the I/O resource allocation behavior of FUSION
driver.  The current version of driver allocates the I/O resources
even if they are not required and this creates trouble in low resource
environments.  This driver now uses
pci_enable_device_mem/pci_enable_device functions to differentiate the
resource allocations.
Signed-off-by: default avatarSathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent 2f7ecc55
......@@ -1470,9 +1470,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
if (mpt_debug_level)
printk(KERN_INFO MYNAM ": mpt_debug_level=%xh\n", mpt_debug_level);
if (pci_enable_device(pdev))
return r;
ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
if (ioc == NULL) {
printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
......@@ -1482,6 +1479,20 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->id = mpt_ids++;
sprintf(ioc->name, "ioc%d", ioc->id);
ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
if (pci_enable_device_mem(pdev)) {
kfree(ioc);
printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
"failed\n", ioc->name);
return r;
}
if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
kfree(ioc);
printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
"MEM failed\n", ioc->name);
return r;
}
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
......@@ -1794,6 +1805,7 @@ mpt_suspend(struct pci_dev *pdev, pm_message_t state)
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
pci_disable_device(pdev);
pci_release_selected_regions(pdev, ioc->bars);
pci_set_power_state(pdev, device_state);
return 0;
......@@ -1810,7 +1822,6 @@ mpt_resume(struct pci_dev *pdev)
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
u32 device_state = pdev->current_state;
int recovery_state;
int err;
printk(MYIOC_s_INFO_FMT
"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
......@@ -1818,9 +1829,18 @@ mpt_resume(struct pci_dev *pdev)
pci_set_power_state(pdev, 0);
pci_restore_state(pdev);
err = pci_enable_device(pdev);
if (err)
return err;
if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) {
ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
IORESOURCE_IO);
if (pci_enable_device(pdev))
return 0;
} else {
ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
if (pci_enable_device_mem(pdev))
return 0;
}
if (pci_request_selected_regions(pdev, ioc->bars, "mpt"))
return 0;
/* enable interrupts */
CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
......@@ -1881,6 +1901,7 @@ mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
* -2 if READY but IOCFacts Failed
* -3 if READY but PrimeIOCFifos Failed
* -4 if READY but IOCInit Failed
* -5 if failed to enable_device and/or request_selected_regions
*/
static int
mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
......@@ -1979,6 +2000,18 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
}
}
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
(ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
pci_release_selected_regions(ioc->pcidev, ioc->bars);
ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
IORESOURCE_IO);
if (pci_enable_device(ioc->pcidev))
return -5;
if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
"mpt"))
return -5;
}
/*
* Device is reset now. It must have de-asserted the interrupt line
* (if it was asserted) and it should be safe to register for the
......@@ -2383,6 +2416,9 @@ mpt_adapter_dispose(MPT_ADAPTER *ioc)
ioc->memmap = NULL;
}
pci_disable_device(ioc->pcidev);
pci_release_selected_regions(ioc->pcidev, ioc->bars);
#if defined(CONFIG_MTRR) && 0
if (ioc->mtrr_reg > 0) {
mtrr_del(ioc->mtrr_reg, 0, 0);
......
......@@ -629,6 +629,7 @@ typedef struct _MPT_ADAPTER
dma_addr_t HostPageBuffer_dma;
int mtrr_reg;
struct pci_dev *pcidev; /* struct pci_dev pointer */
int bars; /* bitmask of BAR's that must be configured */
u8 __iomem *memmap; /* mmap address */
struct Scsi_Host *sh; /* Scsi Host pointer */
SpiCfgData spi_data; /* Scsi config. data */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment