riscv: dts: starfive: jh7110: add the node and pins configuration for tdm

Add the tdm controller node and pins configuration of tdm for the
StarFive JH7110 SoC.
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi

@@ -315,6 +315,46 @@ GPOEN_DISABLE,
 			slew-rate = <0>;
 		};
 	};
+
+	tdm_pins: tdm-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(61, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_RXD)>;
+			input-enable;
+		};
+
+		sync-pins {
+			pinmux = <GPIOMUX(63, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_SYNC)>;
+			input-enable;
+		};
+
+		pcmclk-pins {
+			pinmux = <GPIOMUX(38, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_CLK)>;
+			input-enable;
+		};
+	};
+};
+
+&tdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tdm_pins>;
+	status = "okay";
 };
 
 &uart0 {
@@ -325,7 +365,6 @@ &uart0 {
 
 &usb0 {
 	dr_mode = "peripheral";
-	status = "okay";
 };
 
 &U74_1 {

arch/riscv/boot/dts/starfive/jh7110.dtsi

@@ -491,6 +491,27 @@ spi2: spi@10080000 {
 			status = "disabled";
 		};
 
+		tdm: tdm@10090000 {
+			compatible = "starfive,jh7110-tdm";
+			reg = <0x0 0x10090000 0x0 0x1000>;
+			clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
+				 <&syscrg JH7110_SYSCLK_TDM_APB>,
+				 <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
+				 <&syscrg JH7110_SYSCLK_TDM_TDM>,
+				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+				 <&tdm_ext>;
+			clock-names = "tdm_ahb", "tdm_apb",
+				      "tdm_internal", "tdm",
+				      "mclk_inner", "tdm_ext";
+			resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
+				 <&syscrg JH7110_SYSRST_TDM_APB>,
+				 <&syscrg JH7110_SYSRST_TDM_CORE>;
+			dmas = <&dma 20>, <&dma 21>;
+			dma-names = "rx","tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
 		usb0: usb@10100000 {
 			compatible = "starfive,jh7110-usb";
 			ranges = <0x0 0x0 0x10100000 0x100000>;