spi: Pull in Atmel fix

Pull in Atmel fix series, only first patch of which is for Linus
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/atmel-quadspi.c

@@ -277,6 +277,9 @@ static int atmel_qspi_find_mode(const struct spi_mem_op *op)
 static bool atmel_qspi_supports_op(struct spi_mem *mem,
 				   const struct spi_mem_op *op)
 {
+	if (!spi_mem_default_supports_op(mem, op))
+		return false;
+
 	if (atmel_qspi_find_mode(op) < 0)
 		return false;
 
@@ -285,12 +288,6 @@ static bool atmel_qspi_supports_op(struct spi_mem *mem,
 		op->dummy.nbytes == 0)
 		return false;
 
-	/* DTR ops not supported. */
-	if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
-		return false;
-	if (op->cmd.nbytes != 1)
-		return false;
-
 	return true;
 }
 

drivers/spi/spi-bcm-qspi.c

@@ -1205,7 +1205,7 @@ static int bcm_qspi_exec_mem_op(struct spi_mem *mem,
 	addr = op->addr.val;
 	len = op->data.nbytes;
 
-	if (bcm_qspi_bspi_ver_three(qspi) == true) {
+	if (has_bspi(qspi) && bcm_qspi_bspi_ver_three(qspi) == true) {
 		/*
 		 * The address coming into this function is a raw flash offset.
 		 * But for BSPI <= V3, we need to convert it to a remapped BSPI
@@ -1224,7 +1224,7 @@ static int bcm_qspi_exec_mem_op(struct spi_mem *mem,
 	    len < 4)
 		mspi_read = true;
 
-	if (mspi_read)
+	if (!has_bspi(qspi) || mspi_read)
 		return bcm_qspi_mspi_exec_mem_op(spi, op);
 
 	ret = bcm_qspi_bspi_set_mode(qspi, op, 0);

drivers/spi/spi-cadence-quadspi.c

@@ -19,6 +19,7 @@
 #include <linux/iopoll.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
+#include <linux/log2.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of.h>
@@ -102,12 +103,6 @@ struct cqspi_driver_platdata {
 #define CQSPI_TIMEOUT_MS			500
 #define CQSPI_READ_TIMEOUT_MS			10
 
-/* Instruction type */
-#define CQSPI_INST_TYPE_SINGLE			0
-#define CQSPI_INST_TYPE_DUAL			1
-#define CQSPI_INST_TYPE_QUAD			2
-#define CQSPI_INST_TYPE_OCTAL			3
-
 #define CQSPI_DUMMY_CLKS_PER_BYTE		8
 #define CQSPI_DUMMY_BYTES_MAX			4
 #define CQSPI_DUMMY_CLKS_MAX			31
@@ -376,10 +371,6 @@ static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op, bool dtr)
 static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata,
 			      const struct spi_mem_op *op)
 {
-	f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE;
-	f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE;
-	f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
-
 	/*
 	 * For an op to be DTR, cmd phase along with every other non-empty
 	 * phase should have dtr field set to 1. If an op phase has zero
@@ -389,32 +380,23 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata,
 		       (!op->addr.nbytes || op->addr.dtr) &&
 		       (!op->data.nbytes || op->data.dtr);
 
-	switch (op->data.buswidth) {
-	case 0:
-		break;
-	case 1:
-		f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
-		break;
-	case 2:
-		f_pdata->data_width = CQSPI_INST_TYPE_DUAL;
-		break;
-	case 4:
-		f_pdata->data_width = CQSPI_INST_TYPE_QUAD;
-		break;
-	case 8:
-		f_pdata->data_width = CQSPI_INST_TYPE_OCTAL;
-		break;
-	default:
-		return -EINVAL;
-	}
+	f_pdata->inst_width = 0;
+	if (op->cmd.buswidth)
+		f_pdata->inst_width = ilog2(op->cmd.buswidth);
+
+	f_pdata->addr_width = 0;
+	if (op->addr.buswidth)
+		f_pdata->addr_width = ilog2(op->addr.buswidth);
+
+	f_pdata->data_width = 0;
+	if (op->data.buswidth)
+		f_pdata->data_width = ilog2(op->data.buswidth);
 
 	/* Right now we only support 8-8-8 DTR mode. */
 	if (f_pdata->dtr) {
 		switch (op->cmd.buswidth) {
 		case 0:
-			break;
 		case 8:
-			f_pdata->inst_width = CQSPI_INST_TYPE_OCTAL;
 			break;
 		default:
 			return -EINVAL;
@@ -422,9 +404,7 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata,
 
 		switch (op->addr.buswidth) {
 		case 0:
-			break;
 		case 8:
-			f_pdata->addr_width = CQSPI_INST_TYPE_OCTAL;
 			break;
 		default:
 			return -EINVAL;
@@ -432,9 +412,7 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata,
 
 		switch (op->data.buswidth) {
 		case 0:
-			break;
 		case 8:
-			f_pdata->data_width = CQSPI_INST_TYPE_OCTAL;
 			break;
 		default:
 			return -EINVAL;
@@ -1437,9 +1415,24 @@ static bool cqspi_supports_mem_op(struct spi_mem *mem,
 	all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr &&
 		    !op->data.dtr;
 
-	/* Mixed DTR modes not supported. */
-	if (!(all_true || all_false))
+	if (all_true) {
+		/* Right now we only support 8-8-8 DTR mode. */
+		if (op->cmd.nbytes && op->cmd.buswidth != 8)
+			return false;
+		if (op->addr.nbytes && op->addr.buswidth != 8)
+			return false;
+		if (op->data.nbytes && op->data.buswidth != 8)
+			return false;
+	} else if (all_false) {
+		/* Only 1-1-X ops are supported without DTR */
+		if (op->cmd.nbytes && op->cmd.buswidth > 1)
+			return false;
+		if (op->addr.nbytes && op->addr.buswidth > 1)
+			return false;
+	} else {
+		/* Mixed DTR modes are not supported. */
 		return false;
+	}
 
 	return spi_mem_default_supports_op(mem, op);
 }

drivers/spi/spi-intel-pci.c

@@ -72,6 +72,7 @@ static const struct pci_device_id intel_spi_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x4da4), (unsigned long)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x51a4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0x54a4), (unsigned long)&cnl_info },
+	{ PCI_VDEVICE(INTEL, 0x7a24), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0x7aa4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info },

drivers/spi/spi-mtk-nor.c

@@ -960,7 +960,17 @@ static int __maybe_unused mtk_nor_suspend(struct device *dev)
 
 static int __maybe_unused mtk_nor_resume(struct device *dev)
 {
-	return pm_runtime_force_resume(dev);
+	struct spi_controller *ctlr = dev_get_drvdata(dev);
+	struct mtk_nor *sp = spi_controller_get_devdata(ctlr);
+	int ret;
+
+	ret = pm_runtime_force_resume(dev);
+	if (ret)
+		return ret;
+
+	mtk_nor_init(sp);
+
+	return 0;
 }
 
 static const struct dev_pm_ops mtk_nor_pm_ops = {

drivers/spi/spi-mxic.c

@@ -813,6 +813,7 @@ static int mxic_spi_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "spi_register_master failed\n");
 		pm_runtime_disable(&pdev->dev);
+		mxic_spi_mem_ecc_remove(mxic);
 	}
 
 	return ret;

drivers/spi/spi-rpc-if.c

@@ -158,14 +158,18 @@ static int rpcif_spi_probe(struct platform_device *pdev)
 
 	error = rpcif_hw_init(rpc, false);
 	if (error)
-		return error;
+		goto out_disable_rpm;
 
 	error = spi_register_controller(ctlr);
 	if (error) {
 		dev_err(&pdev->dev, "spi_register_controller failed\n");
-		rpcif_disable_rpm(rpc);
+		goto out_disable_rpm;
 	}
 
+	return 0;
+
+out_disable_rpm:
+	rpcif_disable_rpm(rpc);
 	return error;
 }
 

drivers/spi/spi.c

@@ -1130,11 +1130,15 @@ static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg)
 
 	if (ctlr->dma_tx)
 		tx_dev = ctlr->dma_tx->device->dev;
+	else if (ctlr->dma_map_dev)
+		tx_dev = ctlr->dma_map_dev;
 	else
 		tx_dev = ctlr->dev.parent;
 
 	if (ctlr->dma_rx)
 		rx_dev = ctlr->dma_rx->device->dev;
+	else if (ctlr->dma_map_dev)
+		rx_dev = ctlr->dma_map_dev;
 	else
 		rx_dev = ctlr->dev.parent;