ASoC: Intel: broadwell: Remove haswell-solution specific code

Remove code specific to sound/soc/intel/haswell. Update BE dai_link
definition to provide seamless transition to catpt solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-12-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/intel/boards/broadwell.c

@@ -14,9 +14,6 @@
 #include <sound/pcm_params.h>
 #include <sound/soc-acpi.h>
 
-#include "../common/sst-dsp.h"
-#include "../haswell/sst-haswell-ipc.h"
-
 #include "../../codecs/rt286.h"
 
 static struct snd_soc_jack broadwell_headset;
@@ -122,27 +119,6 @@ static const struct snd_soc_ops broadwell_rt286_ops = {
 	.hw_params = broadwell_rt286_hw_params,
 };
 
-#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
-static int broadwell_rtd_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
-	struct sst_pdata *pdata = dev_get_platdata(component->dev);
-	struct sst_hsw *broadwell = pdata->dsp;
-	int ret;
-
-	/* Set ADSP SSP port settings */
-	ret = sst_hsw_device_set_config(broadwell, SST_HSW_DEVICE_SSP_0,
-		SST_HSW_DEVICE_MCLK_FREQ_24_MHZ,
-		SST_HSW_DEVICE_CLOCK_MASTER, 9);
-	if (ret < 0) {
-		dev_err(rtd->dev, "error: failed to set device config\n");
-		return ret;
-	}
-
-	return 0;
-}
-#endif
-
 static const unsigned int channels[] = {
 	2,
 };
@@ -189,10 +165,8 @@ SND_SOC_DAILINK_DEF(platform,
 SND_SOC_DAILINK_DEF(codec,
 	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-INT343A:00", "rt286-aif1")));
 
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 SND_SOC_DAILINK_DEF(ssp0_port,
 	    DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
-#endif
 
 /* broadwell digital audio interface glue - connects codec <--> CPU */
 static struct snd_soc_dai_link broadwell_rt286_dais[] = {
@@ -201,9 +175,6 @@ static struct snd_soc_dai_link broadwell_rt286_dais[] = {
 		.name = "System PCM",
 		.stream_name = "System Playback/Capture",
 		.dynamic = 1,
-#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
-		.init = broadwell_rtd_init,
-#endif
 		.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
 		.ops = &broadwell_fe_ops,
 		.dpcm_playback = 1,
@@ -248,11 +219,7 @@ static struct snd_soc_dai_link broadwell_rt286_dais[] = {
 		.ops = &broadwell_rt286_ops,
 		.dpcm_playback = 1,
 		.dpcm_capture = 1,
-#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
-		SND_SOC_DAILINK_REG(dummy, codec, dummy),
-#else
 		SND_SOC_DAILINK_REG(ssp0_port, codec, platform),
-#endif
 	},
 };