scsi: hisi_sas: Speed up error handling when internal abort timeout occurs

If an internal task abort timeout occurs, the controller has developed a
fault, and needs to be reset to be recovered.

When this occurs during error handling, the current policy is to allow
error handling to continue, and the inevitable nexus ha reset will handle
the required reset.

However various steps of error handling need to taken before this happens.
These also involve some level of HW interaction, which will also fail with
various timeouts.

Speed up this process by recording a HW fault bit for an internal abort
timeout - when this is set, just automatically error any HW interaction,
and essentially go straight to clear nexus ha (to reset the controller).

Link: https://lore.kernel.org/r/1623058179-80434-6-git-send-email-john.garry@huawei.comSigned-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/hisi_sas/hisi_sas.h

@@ -38,6 +38,7 @@
 #define HISI_SAS_RESET_BIT	0
 #define HISI_SAS_REJECT_CMD_BIT	1
 #define HISI_SAS_PM_BIT		2
+#define HISI_SAS_HW_FAULT_BIT	3
 #define HISI_SAS_MAX_COMMANDS (HISI_SAS_QUEUE_SLOTS)
 #define HISI_SAS_RESERVED_IPTT  96
 #define HISI_SAS_UNRESERVED_IPTT \

drivers/scsi/hisi_sas/hisi_sas_main.c

@@ -1616,6 +1616,7 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 	}
 
 	hisi_sas_controller_reset_done(hisi_hba);
+	clear_bit(HISI_SAS_HW_FAULT_BIT, &hisi_hba->flags);
 	dev_info(dev, "controller reset complete\n");
 
 	return 0;
@@ -2079,6 +2080,9 @@ _hisi_sas_internal_task_abort(struct hisi_hba *hisi_hba,
 	if (!hisi_hba->hw->prep_abort)
 		return TMF_RESP_FUNC_FAILED;
 
+	if (test_bit(HISI_SAS_HW_FAULT_BIT, &hisi_hba->flags))
+		return -EIO;
+
 	task = sas_alloc_slow_task(GFP_KERNEL);
 	if (!task)
 		return -ENOMEM;
@@ -2109,6 +2113,8 @@ _hisi_sas_internal_task_abort(struct hisi_hba *hisi_hba,
 		if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 			struct hisi_sas_slot *slot = task->lldd_task;
 
+			set_bit(HISI_SAS_HW_FAULT_BIT, &hisi_hba->flags);
+
 			if (slot) {
 				struct hisi_sas_cq *cq =
 					&hisi_hba->cq[slot->dlvry_queue];