Commit e8a91c95 authored by Russell King's avatar Russell King Committed by Russell King

[ARM] omap: Fix IO_ADDRESS() macros

OMAP1_IO_ADDRESS(), OMAP2_IO_ADDRESS() and IO_ADDRESS() returns cookies
for use with __raw_{read|write}* for accessing registers.  Therefore,
these macros should return (void __iomem *) cookies, not integer values.

Doing this improves typechecking, and means we can find those places
where, eg, DMA controllers are incorrectly given virtual addresses to
DMA to, or physical addresses are thrown through a virtual to physical
address translation.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent d592dd1a
......@@ -67,8 +67,8 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (char*)IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = (unsigned long)OMAP_UART1_BASE,
.membase = IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = OMAP_UART1_BASE,
.irq = INT_UART1,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
......@@ -76,8 +76,8 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
.membase = (char*)IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = (unsigned long)OMAP_UART2_BASE,
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
.irq = INT_UART2,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
......@@ -85,8 +85,8 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
.membase = (char*)IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = (unsigned long)OMAP_UART3_BASE,
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
.irq = INT_UART3,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
......
......@@ -18,7 +18,7 @@
#ifndef __ASSEMBLER__
#define OMAP_CM_REGADDR(module, reg) \
(void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
#else
#define OMAP2420_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
......
......@@ -64,10 +64,8 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned gpmc_cs_map;
static void __iomem *gpmc_base =
(void __iomem *) IO_ADDRESS(GPMC_BASE);
static void __iomem *gpmc_cs_base =
(void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
static void __iomem *gpmc_base = IO_ADDRESS(GPMC_BASE);
static void __iomem *gpmc_cs_base = IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
static struct clk *gpmc_fck;
......
......@@ -21,11 +21,11 @@
#include <mach/cpu.h>
#if defined(CONFIG_ARCH_OMAP2420)
#define TAP_BASE io_p2v(0x48014000)
#define TAP_BASE IO_ADDRESS(0x48014000)
#elif defined(CONFIG_ARCH_OMAP2430)
#define TAP_BASE io_p2v(0x4900A000)
#define TAP_BASE IO_ADDRESS(0x4900A000)
#elif defined(CONFIG_ARCH_OMAP34XX)
#define TAP_BASE io_p2v(0x4830A000)
#define TAP_BASE IO_ADDRESS(0x4830A000)
#endif
#define OMAP_TAP_IDCODE 0x0204
......
......@@ -32,7 +32,7 @@
* for each bank.. when in doubt, consult the TRM.
*/
static struct omap_irq_bank {
unsigned long base_reg;
void __iomem *base_reg;
unsigned int nr_irqs;
} __attribute__ ((aligned(4))) irq_banks[] = {
{
......@@ -94,7 +94,7 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
unsigned long tmp;
tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff;
printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx "
printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
"(revision %ld.%ld) with %d interrupts\n",
bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
......
......@@ -18,7 +18,7 @@
#ifndef __ASSEMBLER__
#define OMAP_PRM_REGADDR(module, reg) \
(void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
#else
#define OMAP2420_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
......
......@@ -32,24 +32,24 @@ static struct clk * uart3_fck = NULL;
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (char *)IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = (unsigned long)OMAP_UART1_BASE,
.membase = IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = OMAP_UART1_BASE,
.irq = 72,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP16XX_BASE_BAUD * 16,
}, {
.membase = (char *)IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = (unsigned long)OMAP_UART2_BASE,
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
.irq = 73,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP16XX_BASE_BAUD * 16,
}, {
.membase = (char *)IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = (unsigned long)OMAP_UART3_BASE,
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
.irq = 74,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
......@@ -71,7 +71,7 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
int value)
{
offset <<= p->regshift;
__raw_writeb(value, (unsigned long)(p->membase + offset));
__raw_writeb(value, p->membase + offset);
}
/*
......
......@@ -258,12 +258,12 @@ static void __init __omap2_set_globals(void)
#if defined(CONFIG_ARCH_OMAP2420)
static struct omap_globals omap242x_globals = {
.tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x48014000),
.sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
.sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
.ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
.prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
.cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
.tap = OMAP2_IO_ADDRESS(0x48014000),
.sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
.sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
.ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
.prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
.cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
};
void __init omap2_set_globals_242x(void)
......@@ -276,12 +276,12 @@ void __init omap2_set_globals_242x(void)
#if defined(CONFIG_ARCH_OMAP2430)
static struct omap_globals omap243x_globals = {
.tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4900a000),
.sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
.sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
.ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
.prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
.cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
.tap = OMAP2_IO_ADDRESS(0x4900a000),
.sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
.sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
.ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
.prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
.cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
};
void __init omap2_set_globals_243x(void)
......@@ -294,12 +294,12 @@ void __init omap2_set_globals_243x(void)
#if defined(CONFIG_ARCH_OMAP3430)
static struct omap_globals omap343x_globals = {
.tap = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4830A000),
.sdrc = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
.sms = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
.ctrl = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
.prm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
.cm = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
.tap = OMAP2_IO_ADDRESS(0x4830A000),
.sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
.sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
.ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
.prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
.cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
};
void __init omap2_set_globals_343x(void)
......
......@@ -2297,13 +2297,13 @@ static int __init omap_init_dma(void)
int ch, r;
if (cpu_class_is_omap1()) {
omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP1_DMA_BASE);
omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap24xx()) {
omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP24XX_DMA4_BASE);
omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap34xx()) {
omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP34XX_DMA4_BASE);
omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");
......
......@@ -693,7 +693,7 @@ int __init omap_dm_timer_init(void)
for (i = 0; i < dm_timer_count; i++) {
timer = &dm_timers[i];
timer->io_base = (void __iomem *)io_p2v(timer->phys_base);
timer->io_base = IO_ADDRESS(timer->phys_base);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
if (cpu_class_is_omap2()) {
char clk_name[16];
......
......@@ -19,11 +19,11 @@
#include <mach/io.h>
#define OMAP242X_CTRL_REGADDR(reg) \
(void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
(void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
(void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
/*
* As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
......
......@@ -55,14 +55,13 @@
#if defined(CONFIG_ARCH_OMAP1)
#define IO_PHYS 0xFFFB0000
#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define IO_SIZE 0x40000
#define IO_VIRT (IO_PHYS - IO_OFFSET)
#define IO_ADDRESS(pa) ((pa) - IO_OFFSET)
#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
#define io_p2v(pa) ((pa) - IO_OFFSET)
#define io_v2p(va) ((va) + IO_OFFSET)
#define IO_PHYS 0xFFFB0000
#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define IO_SIZE 0x40000
#define IO_VIRT (IO_PHYS - IO_OFFSET)
#define __IO_ADDRESS(pa) ((pa) - IO_OFFSET)
#define __OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
#define io_v2p(va) ((va) + IO_OFFSET)
#elif defined(CONFIG_ARCH_OMAP2)
......@@ -90,11 +89,10 @@
#endif
#define IO_OFFSET 0x90000000
#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
#define IO_OFFSET 0x90000000
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
/* DSP */
#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */
......@@ -149,9 +147,8 @@
#define IO_OFFSET 0x90000000
#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
/* DSP */
......@@ -167,7 +164,14 @@
#endif
#ifndef __ASSEMBLER__
#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
#define OMAP1_IO_ADDRESS(pa) IOMEM(__OMAP1_IO_ADDRESS(pa))
#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa))
#ifdef __ASSEMBLER__
#define IOMEM(x) x
#else
#define IOMEM(x) ((void __force __iomem *)(x))
/*
* Functions to access the OMAP IO region
......@@ -178,13 +182,13 @@
* - DO NOT use hardcoded virtual addresses to allow changing the
* IO address space again if needed
*/
#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a))
#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a))
#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a))
#define omap_readb(a) __raw_readb(IO_ADDRESS(a))
#define omap_readw(a) __raw_readw(IO_ADDRESS(a))
#define omap_readl(a) __raw_readl(IO_ADDRESS(a))
#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v))
#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v))
#define omap_writeb(v,a) __raw_writeb(v, IO_ADDRESS(a))
#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a))
#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a))
extern void omap1_map_common_io(void);
extern void omap1_init_common_hw(void);
......
......@@ -39,11 +39,11 @@
* Register and offset definitions to be used in PM assembler code
* ----------------------------------------------------------------------------
*/
#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00)
#define CLKGEN_REG_ASM_BASE IO_ADDRESS(0xfffece00)
#define ARM_IDLECT1_ASM_OFFSET 0x04
#define ARM_IDLECT2_ASM_OFFSET 0x08
#define TCMIF_ASM_BASE io_p2v(0xfffecc00)
#define TCMIF_ASM_BASE IO_ADDRESS(0xfffecc00)
#define EMIFS_CONFIG_ASM_OFFSET 0x0c
#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20
......
......@@ -63,9 +63,9 @@
*/
#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
#define OMAP242X_SMS_REGADDR(reg) IO_ADDRESS(OMAP2420_SMS_BASE + reg)
#define OMAP243X_SMS_REGADDR(reg) IO_ADDRESS(OMAP243X_SMS_BASE + reg)
#define OMAP343X_SMS_REGADDR(reg) IO_ADDRESS(OMAP343X_SMS_BASE + reg)
/* SMS register offsets - read/write with sms_{read,write}_reg() */
......
......@@ -212,9 +212,9 @@ static void enable_rfbi_mode(int enable)
dispc_write_reg(DISPC_CONTROL, l);
/* Set bypass mode in RFBI module */
l = __raw_readl(io_p2v(RFBI_CONTROL));
l = __raw_readl(IO_ADDRESS(RFBI_CONTROL));
l |= enable ? 0 : (1 << 1);
__raw_writel(l, io_p2v(RFBI_CONTROL));
__raw_writel(l, IO_ADDRESS(RFBI_CONTROL));
}
static void set_lcd_data_lines(int data_lines)
......@@ -1419,7 +1419,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
}
/* L3 firewall setting: enable access to OCM RAM */
__raw_writel(0x402000b0, io_p2v(0x680050a0));
__raw_writel(0x402000b0, IO_ADDRESS(0x680050a0));
if ((r = alloc_palette_ram()) < 0)
goto fail2;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment