ath9k_hw: Enable manual peak calibration for AR9485

commit e99c60b5 upstream.

Manual peak calibration is currently enabled only for
AR9462 and AR9565. This is also required for AR9485.
The initvals are also modified to disable HW peak calibration.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/wireless/ath/ath9k/ar9003_calib.c

@@ -965,7 +965,7 @@ static void ar9003_hw_do_manual_peak_cal(struct ath_hw *ah,
 {
 	int i;
 
-	if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah))
+	if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah))
 		return;
 
 	for (i = 0; i < AR9300_MAX_CHAINS; i++) {

drivers/net/wireless/ath/ath9k/ar9485_initvals.h

@@ -1020,7 +1020,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = {
 	{0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
 	{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
 	{0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982},
 	{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
 	{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},