Commit e8c24c6f authored by Amit Kucheria's avatar Amit Kucheria Committed by Eduardo Valentin

drivers: thermal: tsens: Add generic support for TSENS v1 IP

qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4
of the TSENS IP, functionality for which is encapsulated inside the
qcom,tsens-v1 compatible.
Signed-off-by: default avatarAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: default avatarEduardo Valentin <edubezval@gmail.com>
parent a9604f28
obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
qcom_tsens-y += tsens.o tsens-common.o tsens-v0_1.o tsens-8960.o tsens-v2.o
qcom_tsens-y += tsens.o tsens-common.o tsens-v0_1.o \
tsens-8960.o tsens-v2.o tsens-v1.o
obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2019, Linaro Limited
*/
#include <linux/bitops.h>
#include <linux/regmap.h>
#include <linux/delay.h>
#include "tsens.h"
/* ----- SROT ------ */
#define SROT_HW_VER_OFF 0x0000
#define SROT_CTRL_OFF 0x0004
/* ----- TM ------ */
#define TM_INT_EN_OFF 0x0000
#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004
#define TM_Sn_STATUS_OFF 0x0044
#define TM_TRDY_OFF 0x0084
/* eeprom layout data for qcs404/405 (v1) */
#define BASE0_MASK 0x000007f8
#define BASE1_MASK 0x0007f800
#define BASE0_SHIFT 3
#define BASE1_SHIFT 11
#define S0_P1_MASK 0x0000003f
#define S1_P1_MASK 0x0003f000
#define S2_P1_MASK 0x3f000000
#define S3_P1_MASK 0x000003f0
#define S4_P1_MASK 0x003f0000
#define S5_P1_MASK 0x0000003f
#define S6_P1_MASK 0x0003f000
#define S7_P1_MASK 0x3f000000
#define S8_P1_MASK 0x000003f0
#define S9_P1_MASK 0x003f0000
#define S0_P2_MASK 0x00000fc0
#define S1_P2_MASK 0x00fc0000
#define S2_P2_MASK_1_0 0xc0000000
#define S2_P2_MASK_5_2 0x0000000f
#define S3_P2_MASK 0x0000fc00
#define S4_P2_MASK 0x0fc00000
#define S5_P2_MASK 0x00000fc0
#define S6_P2_MASK 0x00fc0000
#define S7_P2_MASK_1_0 0xc0000000
#define S7_P2_MASK_5_2 0x0000000f
#define S8_P2_MASK 0x0000fc00
#define S9_P2_MASK 0x0fc00000
#define S0_P1_SHIFT 0
#define S0_P2_SHIFT 6
#define S1_P1_SHIFT 12
#define S1_P2_SHIFT 18
#define S2_P1_SHIFT 24
#define S2_P2_SHIFT_1_0 30
#define S2_P2_SHIFT_5_2 0
#define S3_P1_SHIFT 4
#define S3_P2_SHIFT 10
#define S4_P1_SHIFT 16
#define S4_P2_SHIFT 22
#define S5_P1_SHIFT 0
#define S5_P2_SHIFT 6
#define S6_P1_SHIFT 12
#define S6_P2_SHIFT 18
#define S7_P1_SHIFT 24
#define S7_P2_SHIFT_1_0 30
#define S7_P2_SHIFT_5_2 0
#define S8_P1_SHIFT 4
#define S8_P2_SHIFT 10
#define S9_P1_SHIFT 16
#define S9_P2_SHIFT 22
#define CAL_SEL_MASK 7
#define CAL_SEL_SHIFT 0
static int calibrate_v1(struct tsens_priv *priv)
{
u32 base0 = 0, base1 = 0;
u32 p1[10], p2[10];
u32 mode = 0, lsb = 0, msb = 0;
u32 *qfprom_cdata;
int i;
qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
if (IS_ERR(qfprom_cdata))
return PTR_ERR(qfprom_cdata);
mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
dev_dbg(priv->dev, "calibration mode is %d\n", mode);
switch (mode) {
case TWO_PT_CALIB:
base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT;
p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
/* This value is split over two registers, 2 bits and 4 bits */
lsb = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0;
msb = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2;
p2[2] = msb << 2 | lsb;
p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT;
p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT;
/* This value is split over two registers, 2 bits and 4 bits */
lsb = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0;
msb = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2;
p2[7] = msb << 2 | lsb;
p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT;
p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
for (i = 0; i < priv->num_sensors; i++)
p2[i] = ((base1 + p2[i]) << 2);
/* Fall through */
case ONE_PT_CALIB2:
base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT;
p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT;
p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT;
p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT;
p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT;
for (i = 0; i < priv->num_sensors; i++)
p1[i] = (((base0) + p1[i]) << 2);
break;
default:
for (i = 0; i < priv->num_sensors; i++) {
p1[i] = 500;
p2[i] = 780;
}
break;
}
compute_intercept_slope(priv, p1, p2, mode);
return 0;
}
/* v1.x: qcs404,405 */
static const struct tsens_features tsens_v1_feat = {
.ver_major = VER_1_X,
.crit_int = 0,
.adc = 1,
.srot_split = 1,
.max_sensors = 11,
};
static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
/* ----- SROT ------ */
/* VERSION */
[VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31),
[VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27),
[VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15),
/* CTRL_OFFSET */
[TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0),
[TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1),
[SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 13),
/* ----- TM ------ */
/* INTERRUPT ENABLE */
[INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0),
/* Sn_STATUS */
REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9),
REG_FIELD_FOR_EACH_SENSOR11(VALID, TM_Sn_STATUS_OFF, 14, 14),
REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10),
REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11),
REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12),
/* No CRITICAL field on v1.x */
REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS, TM_Sn_STATUS_OFF, 13, 13),
/* TRDY: 1=ready, 0=in progress */
[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
};
static const struct tsens_ops ops_generic_v1 = {
.init = init_common,
.calibrate = calibrate_v1,
.get_temp = get_temp_tsens_valid,
};
const struct tsens_plat_data data_tsens_v1 = {
.ops = &ops_generic_v1,
.feat = &tsens_v1_feat,
.fields = tsens_v1_regfields,
};
......@@ -63,6 +63,9 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,msm8996-tsens",
.data = &data_8996,
}, {
.compatible = "qcom,tsens-v1",
.data = &data_tsens_v1,
}, {
.compatible = "qcom,tsens-v2",
.data = &data_tsens_v2,
......
......@@ -318,6 +318,9 @@ extern const struct tsens_plat_data data_8960;
/* TSENS v0.1 targets */
extern const struct tsens_plat_data data_8916, data_8974;
/* TSENS v1 targets */
extern const struct tsens_plat_data data_tsens_v1;
/* TSENS v2 targets */
extern const struct tsens_plat_data data_8996, data_tsens_v2;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment