Commit e8deb28c authored by Balaji T K's avatar Balaji T K Committed by Samuel Ortiz

mfd: Add support for twl6030 irq framework

This patch adds support for phoenix interrupt framework. New iInterrupt
status register A, B, C are introduced in Phoenix and are cleared on write.
Due to the differences in interrupt handling with respect to TWL4030,
twl6030-irq.c is created for TWL6030 PMIC
Signed-off-by: default avatarRajendra Nayak <rnayak@ti.com>
Signed-off-by: default avatarBalaji T K <balajitk@ti.com>
Signed-off-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent c4aa6f31
......@@ -472,8 +472,22 @@
#endif
#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
#define TWL6030_IRQ_BASE (OMAP_FPGA_IRQ_END)
#ifdef CONFIG_TWL4030_CORE
#define TWL6030_BASE_NR_IRQS 20
#else
#define TWL6030_BASE_NR_IRQS 0
#endif
#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
/* Total number of interrupts depends on the enabled blocks above */
#define NR_IRQS TWL4030_GPIO_IRQ_END
#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END)
#define TWL_IRQ_END TWL4030_GPIO_IRQ_END
#else
#define TWL_IRQ_END TWL6030_IRQ_END
#endif
#define NR_IRQS TWL_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
......
......@@ -103,10 +103,10 @@ config MENELAUS
cell phones and PDAs.
config TWL4030_CORE
bool "Texas Instruments TWL4030/TPS659x0 Support"
bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS
help
Say yes here if you have TWL4030 family chip on your board.
Say yes here if you have TWL4030 / TWL6030 family chip on your board.
This core driver provides register access and IRQ handling
facilities, and registers devices for the various functions
so that function-specific drivers can bind to them.
......
......@@ -26,7 +26,7 @@ obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o
obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o
......
......@@ -181,6 +181,30 @@
/* Triton Core internal information (END) */
/* subchip/slave 0 0x48 - POWER */
#define TWL6030_BASEADD_RTC 0x0000
#define TWL6030_BASEADD_MEM 0x0017
#define TWL6030_BASEADD_PM_MASTER 0x001F
#define TWL6030_BASEADD_PM_SLAVE_MISC 0x0030 /* PM_RECEIVER */
#define TWL6030_BASEADD_PM_MISC 0x00E2
#define TWL6030_BASEADD_PM_PUPD 0x00F0
/* subchip/slave 1 0x49 - FEATURE */
#define TWL6030_BASEADD_USB 0x0000
#define TWL6030_BASEADD_GPADC_CTRL 0x002E
#define TWL6030_BASEADD_AUX 0x0090
#define TWL6030_BASEADD_PWM 0x00BA
#define TWL6030_BASEADD_GASGAUGE 0x00C0
#define TWL6030_BASEADD_PIH 0x00D0
#define TWL6030_BASEADD_CHARGER 0x00E0
/* subchip/slave 2 0x4A - DFT */
#define TWL6030_BASEADD_DIEID 0x00C0
/* subchip/slave 3 0x4B - AUDIO */
#define TWL6030_BASEADD_AUDIO 0x0000
#define TWL6030_BASEADD_RSV 0x0000
/* Few power values */
#define R_CFG_BOOT 0x05
#define R_PROTECT_KEY 0x0E
......@@ -202,13 +226,21 @@
#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */
#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */
#define TWL5031 BIT(2) /* twl5031 has different registers */
#define TWL6030_CLASS BIT(3) /* TWL6030 class */
/*----------------------------------------------------------------------*/
/* is driver active, bound to a chip? */
static bool inuse;
/* Structure for each TWL4030 Slave */
static unsigned int twl_id;
unsigned int twl_rev(void)
{
return twl_id;
}
EXPORT_SYMBOL(twl_rev);
/* Structure for each TWL4030/TWL6030 Slave */
struct twl_client {
struct i2c_client *client;
u8 address;
......@@ -228,11 +260,12 @@ struct twl_mapping {
unsigned char sid; /* Slave ID */
unsigned char base; /* base address */
};
struct twl_mapping *twl_map;
static struct twl_mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
/*
* NOTE: don't change this table without updating the
* <linux/i2c/twl4030.h> defines for TWL4030_MODULE_*
* <linux/i2c/twl.h> defines for TWL4030_MODULE_*
* so they continue to match the order in this table.
*/
......@@ -265,6 +298,40 @@ static struct twl_mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
{ 3, TWL4030_BASEADD_SECURED_REG },
};
static struct twl_mapping twl6030_map[] = {
/*
* NOTE: don't change this table without updating the
* <linux/i2c/twl.h> defines for TWL4030_MODULE_*
* so they continue to match the order in this table.
*/
{ SUB_CHIP_ID1, TWL6030_BASEADD_USB },
{ SUB_CHIP_ID3, TWL6030_BASEADD_AUDIO },
{ SUB_CHIP_ID2, TWL6030_BASEADD_DIEID },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID1, TWL6030_BASEADD_PIH },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID1, TWL6030_BASEADD_GPADC_CTRL },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID1, TWL6030_BASEADD_CHARGER },
{ SUB_CHIP_ID1, TWL6030_BASEADD_GASGAUGE },
{ SUB_CHIP_ID1, TWL6030_BASEADD_PWM },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
{ SUB_CHIP_ID0, TWL6030_BASEADD_PM_MASTER },
{ SUB_CHIP_ID0, TWL6030_BASEADD_PM_SLAVE_MISC },
{ SUB_CHIP_ID0, TWL6030_BASEADD_RTC },
{ SUB_CHIP_ID0, TWL6030_BASEADD_MEM },
};
/*----------------------------------------------------------------------*/
/* Exported Functions */
......@@ -292,7 +359,7 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
return -EPERM;
}
sid = twl4030_map[mod_no].sid;
sid = twl_map[mod_no].sid;
twl = &twl_modules[sid];
if (unlikely(!inuse)) {
......@@ -310,7 +377,7 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
msg->flags = 0;
msg->buf = value;
/* over write the first byte of buffer with the register address */
*value = twl4030_map[mod_no].base + reg;
*value = twl_map[mod_no].base + reg;
ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 1);
mutex_unlock(&twl->xfer_lock);
......@@ -349,7 +416,7 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
return -EPERM;
}
sid = twl4030_map[mod_no].sid;
sid = twl_map[mod_no].sid;
twl = &twl_modules[sid];
if (unlikely(!inuse)) {
......@@ -362,7 +429,7 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
msg->addr = twl->address;
msg->len = 1;
msg->flags = 0; /* Read the register value */
val = twl4030_map[mod_no].base + reg;
val = twl_map[mod_no].base + reg;
msg->buf = &val;
/* [MSG2] fill the data rx buffer */
msg = &twl->xfer_msg[1];
......@@ -486,6 +553,7 @@ add_regulator_linked(int num, struct regulator_init_data *pdata,
struct regulator_consumer_supply *consumers,
unsigned num_consumers)
{
unsigned sub_chip_id;
/* regulator framework demands init_data ... */
if (!pdata)
return NULL;
......@@ -496,7 +564,8 @@ add_regulator_linked(int num, struct regulator_init_data *pdata,
}
/* NOTE: we currently ignore regulator IRQs, e.g. for short circuits */
return add_numbered_child(3, "twl_reg", num,
sub_chip_id = twl_map[TWL_MODULE_PM_MASTER].sid;
return add_numbered_child(sub_chip_id, "twl_reg", num,
pdata, sizeof(*pdata), false, 0, 0);
}
......@@ -516,6 +585,7 @@ static int
add_children(struct twl4030_platform_data *pdata, unsigned long features)
{
struct device *child;
unsigned sub_chip_id;
if (twl_has_bci() && pdata->bci &&
!(features & (TPS_SUBSET | TWL5031))) {
......@@ -561,7 +631,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
* Eventually, Linux might become more aware of such
* HW security concerns, and "least privilege".
*/
child = add_child(3, "twl_rtc",
sub_chip_id = twl_map[TWL_MODULE_RTC].sid;
child = add_child(sub_chip_id, "twl_rtc",
NULL, 0,
true, pdata->irq_base + RTC_INTR_OFFSET, 0);
if (IS_ERR(child))
......@@ -812,16 +883,22 @@ static void clocks_init(struct device *dev,
/*----------------------------------------------------------------------*/
int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
int twl_exit_irq(void);
int twl_init_chip_irq(const char *chip);
int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
int twl4030_exit_irq(void);
int twl4030_init_chip_irq(const char *chip);
int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
int twl6030_exit_irq(void);
static int twl_remove(struct i2c_client *client)
{
unsigned i;
int status;
status = twl_exit_irq();
if (twl_class_is_4030())
status = twl4030_exit_irq();
else
status = twl6030_exit_irq();
if (status < 0)
return status;
......@@ -878,6 +955,13 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
mutex_init(&twl->xfer_lock);
}
inuse = true;
if ((id->driver_data) & TWL6030_CLASS) {
twl_id = TWL6030_CLASS_ID;
twl_map = &twl6030_map[0];
} else {
twl_id = TWL4030_CLASS_ID;
twl_map = &twl4030_map[0];
}
/* setup clock framework */
clocks_init(&client->dev, pdata->clock);
......@@ -890,8 +974,15 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (client->irq
&& pdata->irq_base
&& pdata->irq_end > pdata->irq_base) {
twl_init_chip_irq(id->name);
status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
if (twl_class_is_4030()) {
twl4030_init_chip_irq(id->name);
status = twl4030_init_irq(client->irq, pdata->irq_base,
pdata->irq_end);
} else {
status = twl6030_init_irq(client->irq, pdata->irq_base,
pdata->irq_end);
}
if (status < 0)
goto fail;
}
......@@ -910,6 +1001,7 @@ static const struct i2c_device_id twl_ids[] = {
{ "tps65950", 0 }, /* catalog version of twl5030 */
{ "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */
{ "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */
{ "twl6030", TWL6030_CLASS }, /* "Phoenix power chip" */
{ /* end of list */ },
};
MODULE_DEVICE_TABLE(i2c, twl_ids);
......
......@@ -778,7 +778,7 @@ int twl4030_sih_setup(int module)
/* FIXME pass in which interrupt line we'll use ... */
#define twl_irq_line 0
int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
{
static struct irq_chip twl4030_irq_chip;
......@@ -858,7 +858,7 @@ int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
return status;
}
int twl_exit_irq(void)
int twl4030_exit_irq(void)
{
/* FIXME undo twl_init_irq() */
if (twl4030_irq_base) {
......@@ -868,7 +868,7 @@ int twl_exit_irq(void)
return 0;
}
int twl_init_chip_irq(const char *chip)
int twl4030_init_chip_irq(const char *chip)
{
if (!strcmp(chip, "twl5031")) {
sih_modules = sih_modules_twl5031;
......
/*
* twl6030-irq.c - TWL6030 irq support
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
*
* Modifications to defer interrupt handling to a kernel thread:
* Copyright (C) 2006 MontaVista Software, Inc.
*
* Based on tlv320aic23.c:
* Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
*
* Code cleanup and modifications to IRQ handler.
* by syed khasim <x0khasim@ti.com>
*
* TWL6030 specific code and IRQ handling changes by
* Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
* Balaji T K <balajitk@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kthread.h>
#include <linux/i2c/twl.h>
/*
* TWL6030 (unlike its predecessors, which had two level interrupt handling)
* three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C.
* It exposes status bits saying who has raised an interrupt. There are
* three mask registers that corresponds to these status registers, that
* enables/disables these interrupts.
*
* We set up IRQs starting at a platform-specified base. An interrupt map table,
* specifies mapping between interrupt number and the associated module.
*
*/
static int twl6030_interrupt_mapping[24] = {
PWR_INTR_OFFSET, /* Bit 0 PWRON */
PWR_INTR_OFFSET, /* Bit 1 RPWRON */
PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */
RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */
SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */
BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
RSV_INTR_OFFSET, /* Bit 12 Reserved */
MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */
MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */
GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
USBOTG_INTR_OFFSET, /* Bit 18 ID */
USBOTG_INTR_OFFSET, /* Bit 19 VBUS */
CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
CHARGER_INTR_OFFSET, /* Bit 21 EXT_CHRG */
CHARGER_INTR_OFFSET, /* Bit 22 INT_CHRG */
RSV_INTR_OFFSET, /* Bit 23 Reserved */
};
/*----------------------------------------------------------------------*/
static unsigned twl6030_irq_base;
static struct completion irq_event;
/*
* This thread processes interrupts reported by the Primary Interrupt Handler.
*/
static int twl6030_irq_thread(void *data)
{
long irq = (long)data;
static unsigned i2c_errors;
static const unsigned max_i2c_errors = 100;
int ret;
current->flags |= PF_NOFREEZE;
while (!kthread_should_stop()) {
int i;
union {
u8 bytes[4];
u32 int_sts;
} sts;
/* Wait for IRQ, then read PIH irq status (also blocking) */
wait_for_completion_interruptible(&irq_event);
/* read INT_STS_A, B and C in one shot using a burst read */
ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes,
REG_INT_STS_A, 3);
if (ret) {
pr_warning("twl6030: I2C error %d reading PIH ISR\n",
ret);
if (++i2c_errors >= max_i2c_errors) {
printk(KERN_ERR "Maximum I2C error count"
" exceeded. Terminating %s.\n",
__func__);
break;
}
complete(&irq_event);
continue;
}
sts.bytes[3] = 0; /* Only 24 bits are valid*/
for (i = 0; sts.int_sts; sts.int_sts >>= 1, i++) {
local_irq_disable();
if (sts.int_sts & 0x1) {
int module_irq = twl6030_irq_base +
twl6030_interrupt_mapping[i];
struct irq_desc *d = irq_to_desc(module_irq);
if (!d) {
pr_err("twl6030: Invalid SIH IRQ: %d\n",
module_irq);
return -EINVAL;
}
/* These can't be masked ... always warn
* if we get any surprises.
*/
if (d->status & IRQ_DISABLED)
note_interrupt(module_irq, d,
IRQ_NONE);
else
d->handle_irq(module_irq, d);
}
local_irq_enable();
}
ret = twl_i2c_write(TWL_MODULE_PIH, sts.bytes,
REG_INT_STS_A, 3); /* clear INT_STS_A */
if (ret)
pr_warning("twl6030: I2C error in clearing PIH ISR\n");
enable_irq(irq);
}
return 0;
}
/*
* handle_twl6030_int() is the desc->handle method for the twl6030 interrupt.
* This is a chained interrupt, so there is no desc->action method for it.
* Now we need to query the interrupt controller in the twl6030 to determine
* which module is generating the interrupt request. However, we can't do i2c
* transactions in interrupt context, so we must defer that work to a kernel
* thread. All we do here is acknowledge and mask the interrupt and wakeup
* the kernel thread.
*/
static irqreturn_t handle_twl6030_pih(int irq, void *devid)
{
disable_irq_nosync(irq);
complete(devid);
return IRQ_HANDLED;
}
/*----------------------------------------------------------------------*/
static inline void activate_irq(int irq)
{
#ifdef CONFIG_ARM
/* ARM requires an extra step to clear IRQ_NOREQUEST, which it
* sets on behalf of every irq_chip. Also sets IRQ_NOPROBE.
*/
set_irq_flags(irq, IRQF_VALID);
#else
/* same effect on other architectures */
set_irq_noprobe(irq);
#endif
}
/*----------------------------------------------------------------------*/
static unsigned twl6030_irq_next;
/*----------------------------------------------------------------------*/
int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
{
int ret;
u8 unmask_value;
ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,
REG_INT_STS_A + offset);
unmask_value &= (~(bit_mask));
ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value,
REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */
return ret;
}
EXPORT_SYMBOL(twl6030_interrupt_unmask);
int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
{
int ret;
u8 mask_value;
ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,
REG_INT_STS_A + offset);
mask_value |= (bit_mask);
ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value,
REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */
return ret;
}
EXPORT_SYMBOL(twl6030_interrupt_mask);
int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
{
int status = 0;
int i;
struct task_struct *task;
int ret;
u8 mask[4];
static struct irq_chip twl6030_irq_chip;
mask[1] = 0xFF;
mask[2] = 0xFF;
mask[3] = 0xFF;
ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
REG_INT_MSK_LINE_A, 3); /* MASK ALL INT LINES */
ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
REG_INT_MSK_STS_A, 3); /* MASK ALL INT STS */
ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0],
REG_INT_STS_A, 3); /* clear INT_STS_A,B,C */
twl6030_irq_base = irq_base;
/* install an irq handler for each of the modules;
* clone dummy irq_chip since PIH can't *do* anything
*/
twl6030_irq_chip = dummy_irq_chip;
twl6030_irq_chip.name = "twl6030";
twl6030_irq_chip.set_type = NULL;
for (i = irq_base; i < irq_end; i++) {
set_irq_chip_and_handler(i, &twl6030_irq_chip,
handle_simple_irq);
activate_irq(i);
}
twl6030_irq_next = i;
pr_info("twl6030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
irq_num, irq_base, twl6030_irq_next - 1);
/* install an irq handler to demultiplex the TWL6030 interrupt */
init_completion(&irq_event);
task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq");
if (IS_ERR(task)) {
pr_err("twl6030: could not create irq %d thread!\n", irq_num);
status = PTR_ERR(task);
goto fail_kthread;
}
status = request_irq(irq_num, handle_twl6030_pih, IRQF_DISABLED,
"TWL6030-PIH", &irq_event);
if (status < 0) {
pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
goto fail_irq;
}
return status;
fail_irq:
free_irq(irq_num, &irq_event);
fail_kthread:
for (i = irq_base; i < irq_end; i++)
set_irq_chip_and_handler(i, NULL, NULL);
return status;
}
int twl6030_exit_irq(void)
{
if (twl6030_irq_base) {
pr_err("twl6030: can't yet clean up IRQs?\n");
return -ENOSYS;
}
return 0;
}
......@@ -89,6 +89,67 @@
#define BCI_PRES_INTR_OFFSET 9
#define USB_PRES_INTR_OFFSET 10
#define RTC_INTR_OFFSET 11
/*
* Offset from TWL6030_IRQ_BASE / pdata->irq_base
*/
#define PWR_INTR_OFFSET 0
#define HOTDIE_INTR_OFFSET 12
#define SMPSLDO_INTR_OFFSET 13
#define BATDETECT_INTR_OFFSET 14
#define SIMDETECT_INTR_OFFSET 15
#define MMCDETECT_INTR_OFFSET 16
#define GASGAUGE_INTR_OFFSET 17
#define USBOTG_INTR_OFFSET 4
#define CHARGER_INTR_OFFSET 2
#define RSV_INTR_OFFSET 0
/* INT register offsets */
#define REG_INT_STS_A 0x00
#define REG_INT_STS_B 0x01
#define REG_INT_STS_C 0x02
#define REG_INT_MSK_LINE_A 0x03
#define REG_INT_MSK_LINE_B 0x04
#define REG_INT_MSK_LINE_C 0x05
#define REG_INT_MSK_STS_A 0x06
#define REG_INT_MSK_STS_B 0x07
#define REG_INT_MSK_STS_C 0x08
/* MASK INT REG GROUP A */
#define TWL6030_PWR_INT_MASK 0x07
#define TWL6030_RTC_INT_MASK 0x18
#define TWL6030_HOTDIE_INT_MASK 0x20
#define TWL6030_SMPSLDOA_INT_MASK 0xC0
/* MASK INT REG GROUP B */
#define TWL6030_SMPSLDOB_INT_MASK 0x01
#define TWL6030_BATDETECT_INT_MASK 0x02
#define TWL6030_SIMDETECT_INT_MASK 0x04
#define TWL6030_MMCDETECT_INT_MASK 0x08
#define TWL6030_GPADC_INT_MASK 0x60
#define TWL6030_GASGAUGE_INT_MASK 0x80
/* MASK INT REG GROUP C */
#define TWL6030_USBOTG_INT_MASK 0x0F
#define TWL6030_CHARGER_CTRL_INT_MASK 0x10
#define TWL6030_CHARGER_FAULT_INT_MASK 0x60
#define TWL4030_CLASS_ID 0x4030
#define TWL6030_CLASS_ID 0x6030
unsigned int twl_rev(void);
#define GET_TWL_REV (twl_rev())
#define TWL_CLASS_IS(class, id) \
static inline int twl_class_is_ ##class(void) \
{ \
return ((id) == (GET_TWL_REV)) ? 1 : 0; \
}
TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
/*
* Read and write single 8-bit registers
*/
......@@ -104,6 +165,9 @@ int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg);
int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
/*----------------------------------------------------------------------*/
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment