Commit e8f462d2 authored by Dmitry Torokhov's avatar Dmitry Torokhov

Input: ads7846 - fix cache line sharing issue

We had a report a while back that the ads7846 driver had some issues
when used with DMA-based SPI controllers (like atmel_spi) on systems
where main memory is not DMA-coherent (most non-x86 boards). Allocate
memory potentially used for DMA separately to avoid cache line issues.
Reported-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 2d517cab
......@@ -69,6 +69,17 @@ struct ts_event {
int ignore;
};
/*
* We allocate this separately to avoid cache line sharing issues when
* driver is used with DMA-based SPI controllers (like atmel_spi) on
* systems where main memory is not DMA-coherent (most non-x86 boards).
*/
struct ads7846_packet {
u8 read_x, read_y, read_z1, read_z2, pwrdown;
u16 dummy; /* for the pwrdown read */
struct ts_event tc;
};
struct ads7846 {
struct input_dev *input;
char phys[32];
......@@ -86,9 +97,7 @@ struct ads7846 {
u16 x_plate_ohms;
u16 pressure_max;
u8 read_x, read_y, read_z1, read_z2, pwrdown;
u16 dummy; /* for the pwrdown read */
struct ts_event tc;
struct ads7846_packet *packet;
struct spi_transfer xfer[18];
struct spi_message msg[5];
......@@ -513,16 +522,17 @@ static int get_pendown_state(struct ads7846 *ts)
static void ads7846_rx(void *ads)
{
struct ads7846 *ts = ads;
struct ads7846_packet *packet = ts->packet;
unsigned Rt;
u16 x, y, z1, z2;
/* ads7846_rx_val() did in-place conversion (including byteswap) from
* on-the-wire format as part of debouncing to get stable readings.
*/
x = ts->tc.x;
y = ts->tc.y;
z1 = ts->tc.z1;
z2 = ts->tc.z2;
x = packet->tc.x;
y = packet->tc.y;
z1 = packet->tc.z1;
z2 = packet->tc.z2;
/* range filtering */
if (x == MAX_12BIT)
......@@ -546,10 +556,10 @@ static void ads7846_rx(void *ads)
* the maximum. Don't report it to user space, repeat at least
* once more the measurement
*/
if (ts->tc.ignore || Rt > ts->pressure_max) {
if (packet->tc.ignore || Rt > ts->pressure_max) {
#ifdef VERBOSE
pr_debug("%s: ignored %d pressure %d\n",
ts->spi->dev.bus_id, ts->tc.ignore, Rt);
ts->spi->dev.bus_id, packet->tc.ignore, Rt);
#endif
hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
HRTIMER_MODE_REL);
......@@ -642,6 +652,7 @@ static int ads7846_no_filter(void *ads, int data_idx, int *val)
static void ads7846_rx_val(void *ads)
{
struct ads7846 *ts = ads;
struct ads7846_packet *packet = ts->packet;
struct spi_message *m;
struct spi_transfer *t;
int val;
......@@ -661,7 +672,7 @@ static void ads7846_rx_val(void *ads)
case ADS7846_FILTER_REPEAT:
break;
case ADS7846_FILTER_IGNORE:
ts->tc.ignore = 1;
packet->tc.ignore = 1;
/* Last message will contain ads7846_rx() as the
* completion function.
*/
......@@ -669,7 +680,7 @@ static void ads7846_rx_val(void *ads)
break;
case ADS7846_FILTER_OK:
*(u16 *)t->rx_buf = val;
ts->tc.ignore = 0;
packet->tc.ignore = 0;
m = &ts->msg[++ts->msg_idx];
break;
default:
......@@ -774,7 +785,6 @@ static void ads7846_disable(struct ads7846 *ts)
/* we know the chip's in lowpower mode since we always
* leave it that way after every request
*/
}
/* Must be called with ts->lock held */
......@@ -850,6 +860,7 @@ static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts)
static int __devinit ads7846_probe(struct spi_device *spi)
{
struct ads7846 *ts;
struct ads7846_packet *packet;
struct input_dev *input_dev;
struct ads7846_platform_data *pdata = spi->dev.platform_data;
struct spi_message *m;
......@@ -885,14 +896,16 @@ static int __devinit ads7846_probe(struct spi_device *spi)
return err;
ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL);
input_dev = input_allocate_device();
if (!ts || !input_dev) {
if (!ts || !packet || !input_dev) {
err = -ENOMEM;
goto err_free_mem;
}
dev_set_drvdata(&spi->dev, ts);
ts->packet = packet;
ts->spi = spi;
ts->input = input_dev;
ts->vref_mv = pdata->vref_mv;
......@@ -964,13 +977,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
spi_message_init(m);
/* y- still on; turn on only y+ (and ADC) */
ts->read_y = READ_Y(vref);
x->tx_buf = &ts->read_y;
packet->read_y = READ_Y(vref);
x->tx_buf = &packet->read_y;
x->len = 1;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &ts->tc.y;
x->rx_buf = &packet->tc.y;
x->len = 2;
spi_message_add_tail(x, m);
......@@ -982,12 +995,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
x->delay_usecs = pdata->settle_delay_usecs;
x++;
x->tx_buf = &ts->read_y;
x->tx_buf = &packet->read_y;
x->len = 1;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &ts->tc.y;
x->rx_buf = &packet->tc.y;
x->len = 2;
spi_message_add_tail(x, m);
}
......@@ -1000,13 +1013,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
/* turn y- off, x+ on, then leave in lowpower */
x++;
ts->read_x = READ_X(vref);
x->tx_buf = &ts->read_x;
packet->read_x = READ_X(vref);
x->tx_buf = &packet->read_x;
x->len = 1;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &ts->tc.x;
x->rx_buf = &packet->tc.x;
x->len = 2;
spi_message_add_tail(x, m);
......@@ -1015,12 +1028,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
x->delay_usecs = pdata->settle_delay_usecs;
x++;
x->tx_buf = &ts->read_x;
x->tx_buf = &packet->read_x;
x->len = 1;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &ts->tc.x;
x->rx_buf = &packet->tc.x;
x->len = 2;
spi_message_add_tail(x, m);
}
......@@ -1034,13 +1047,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
spi_message_init(m);
x++;
ts->read_z1 = READ_Z1(vref);
x->tx_buf = &ts->read_z1;
packet->read_z1 = READ_Z1(vref);
x->tx_buf = &packet->read_z1;
x->len = 1;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &ts->tc.z1;
x->rx_buf = &packet->tc.z1;
x->len = 2;
spi_message_add_tail(x, m);
......@@ -1049,12 +1062,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
x->delay_usecs = pdata->settle_delay_usecs;
x++;
x->tx_buf = &ts->read_z1;
x->tx_buf = &packet->read_z1;
x->len = 1;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &ts->tc.z1;
x->rx_buf = &packet->tc.z1;
x->len = 2;
spi_message_add_tail(x, m);
}
......@@ -1066,13 +1079,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
spi_message_init(m);
x++;
ts->read_z2 = READ_Z2(vref);
x->tx_buf = &ts->read_z2;
packet->read_z2 = READ_Z2(vref);
x->tx_buf = &packet->read_z2;
x->len = 1;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &ts->tc.z2;
x->rx_buf = &packet->tc.z2;
x->len = 2;
spi_message_add_tail(x, m);
......@@ -1081,12 +1094,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
x->delay_usecs = pdata->settle_delay_usecs;
x++;
x->tx_buf = &ts->read_z2;
x->tx_buf = &packet->read_z2;
x->len = 1;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &ts->tc.z2;
x->rx_buf = &packet->tc.z2;
x->len = 2;
spi_message_add_tail(x, m);
}
......@@ -1100,13 +1113,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
spi_message_init(m);
x++;
ts->pwrdown = PWRDOWN;
x->tx_buf = &ts->pwrdown;
packet->pwrdown = PWRDOWN;
x->tx_buf = &packet->pwrdown;
x->len = 1;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &ts->dummy;
x->rx_buf = &packet->dummy;
x->len = 2;
CS_CHANGE(*x);
spi_message_add_tail(x, m);
......@@ -1159,6 +1172,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
ts->filter_cleanup(ts->filter_data);
err_free_mem:
input_free_device(input_dev);
kfree(packet);
kfree(ts);
return err;
}
......@@ -1184,6 +1198,7 @@ static int __devexit ads7846_remove(struct spi_device *spi)
if (ts->filter_cleanup)
ts->filter_cleanup(ts->filter_data);
kfree(ts->packet);
kfree(ts);
dev_dbg(&spi->dev, "unregistered touchscreen\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment