Commit e92ce89c authored by Felipe Balbi's avatar Felipe Balbi Committed by Tony Lindgren

arm: omap2: n8x0: move i2c devices to DT

By moving i2c devices to DT we can clean up
i2c_board_info and fix a problem with moving
INTC to irq domain where IRQs can be renumbered
on each boot.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 55601c9f
......@@ -6,3 +6,10 @@ / {
model = "Nokia N810";
compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
};
&i2c2 {
aic3x@18 {
compatible = "tlv320aic3x";
reg = <0x18>;
};
};
......@@ -27,6 +27,12 @@ retu_mfd: retu@1 {
&i2c1 {
clock-frequency = <400000>;
pmic@72 {
compatible = "menelaus";
reg = <0x72>;
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
};
};
&i2c2 {
......
......@@ -33,6 +33,7 @@
#include "mmc.h"
#include "soc.h"
#include "gpmc-onenand.h"
#include "common-board-devices.h"
#define TUSB6010_ASYNC_CS 1
#define TUSB6010_SYNC_CS 4
......@@ -568,29 +569,14 @@ static int n8x0_menelaus_late_init(struct device *dev)
}
#endif
static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
.late_init = n8x0_menelaus_late_init,
};
static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
{
I2C_BOARD_INFO("menelaus", 0x72),
.irq = 7 + OMAP_INTC_START,
.platform_data = &n8x0_menelaus_platform_data,
},
};
static struct aic3x_pdata n810_aic33_data __initdata = {
struct aic3x_pdata n810_aic33_data __initdata = {
.gpio_reset = 118,
};
static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
.platform_data = &n810_aic33_data,
},
};
static int __init n8x0_late_initcall(void)
{
if (!board_caps)
......@@ -612,11 +598,5 @@ void * __init n8x0_legacy_init(void)
board_check_revision();
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
i2c_register_board_info(0, n8x0_i2c_board_info_1,
ARRAY_SIZE(n8x0_i2c_board_info_1));
if (board_is_n810())
i2c_register_board_info(1, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
return &mmc1_data;
}
#ifndef __OMAP_COMMON_BOARD_DEVICES__
#define __OMAP_COMMON_BOARD_DEVICES__
#include <sound/tlv320aic3x.h>
#include <linux/mfd/menelaus.h>
#include "twl-common.h"
#define NAND_BLOCK_SIZE SZ_128K
......@@ -12,4 +14,7 @@ void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct ads7846_platform_data *board_pdata);
void *n8x0_legacy_init(void);
extern struct menelaus_platform_data n8x0_menelaus_platform_data;
extern struct aic3x_pdata n810_aic33_data;
#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
......@@ -336,6 +336,8 @@ static struct pdata_init auxdata_quirks[] __initdata = {
struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_MACH_NOKIA_N8X0
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
#endif
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment