Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Documentation/networking/ax25.rst

@@ -7,9 +7,9 @@ AX.25
 To use the amateur radio protocols within Linux you will need to get a
 suitable copy of the AX.25 Utilities. More detailed information about
 AX.25, NET/ROM and ROSE, associated programs and utilities can be
-found on http://www.linux-ax25.org.
+found on https://linux-ax25.in-berlin.de.
 
-There is an active mailing list for discussing Linux amateur radio matters
+There is a mailing list for discussing Linux amateur radio matters
 called linux-hams@vger.kernel.org. To subscribe to it, send a message to
 majordomo@vger.kernel.org with the words "subscribe linux-hams" in the body
 of the message, the subject field is ignored.  You don't need to be

Documentation/process/embargoed-hardware-issues.rst

@@ -251,6 +251,7 @@ an involved disclosed party. The current ambassadors list:
   IBM Z		Christian Borntraeger <borntraeger@de.ibm.com>
   Intel		Tony Luck <tony.luck@intel.com>
   Qualcomm	Trilok Soni <tsoni@codeaurora.org>
+  RISC-V	Palmer Dabbelt <palmer@dabbelt.com>
   Samsung	Javier González <javier.gonz@samsung.com>
 
   Microsoft	James Morris <jamorris@linux.microsoft.com>

Documentation/sound/designs/midi-2.0.rst

@@ -74,8 +74,8 @@ topology based on those information.  When the device is older and
 doesn't respond to the new UMP inquiries, the driver falls back and
 builds the topology based on Group Terminal Block (GTB) information
 from the USB descriptor.  Some device might be screwed up by the
-unexpected UMP command; in such a case, pass `midi2_probe=0` option to
-snd-usb-audio driver for skipping the UMP v1.1 inquiries.
+unexpected UMP command; in such a case, pass `midi2_ump_probe=0`
+option to snd-usb-audio driver for skipping the UMP v1.1 inquiries.
 
 When the MIDI 2.0 device is probed, the kernel creates a rawmidi
 device for each UMP Endpoint of the device.  Its device name is

MAINTAINERS

@@ -3344,7 +3344,7 @@ AX.25 NETWORK LAYER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 S:	Maintained
-W:	http://www.linux-ax25.org/
+W:	https://linux-ax25.in-berlin.de
 F:	include/net/ax25.h
 F:	include/uapi/linux/ax25.h
 F:	net/ax25/
@@ -14769,7 +14769,7 @@ NETROM NETWORK LAYER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 S:	Maintained
-W:	http://www.linux-ax25.org/
+W:	https://linux-ax25.in-berlin.de
 F:	include/net/netrom.h
 F:	include/uapi/linux/netrom.h
 F:	net/netrom/
@@ -18620,7 +18620,7 @@ ROSE NETWORK LAYER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 S:	Maintained
-W:	http://www.linux-ax25.org/
+W:	https://linux-ax25.in-berlin.de
 F:	include/net/rose.h
 F:	include/uapi/linux/rose.h
 F:	net/rose/

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Hurr durr I'ma ninja sloth
 
 # *DOCUMENTATION*

arch/arm/xen/enlighten.c

@@ -207,7 +207,7 @@ static void xen_power_off(void)
 
 static irqreturn_t xen_arm_callback(int irq, void *arg)
 {
-	xen_hvm_evtchn_do_upcall();
+	xen_evtchn_do_upcall();
 	return IRQ_HANDLED;
 }
 

arch/powerpc/Kconfig

@@ -255,7 +255,7 @@ config PPC
 	select HAVE_KPROBES
 	select HAVE_KPROBES_ON_FTRACE
 	select HAVE_KRETPROBES
-	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if HAVE_OBJTOOL_MCOUNT
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if HAVE_OBJTOOL_MCOUNT && (!ARCH_USING_PATCHABLE_FUNCTION_ENTRY || (!CC_IS_GCC || GCC_VERSION >= 110100))
 	select HAVE_LIVEPATCH			if HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI				if PERF_EVENTS || (PPC64 && PPC_BOOK3S)

arch/powerpc/kernel/hw_breakpoint.c

@@ -230,13 +230,15 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs)
 	struct arch_hw_breakpoint *info;
 	int i;
 
+	preempt_disable();
+
 	for (i = 0; i < nr_wp_slots(); i++) {
 		struct perf_event *bp = __this_cpu_read(bp_per_reg[i]);
 
 		if (unlikely(bp && counter_arch_bp(bp)->perf_single_step))
 			goto reset;
 	}
-	return;
+	goto out;
 
 reset:
 	regs_set_return_msr(regs, regs->msr & ~MSR_SE);
@@ -245,6 +247,9 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs)
 		__set_breakpoint(i, info);
 		info->perf_single_step = false;
 	}
+
+out:
+	preempt_enable();
 }
 
 static bool is_larx_stcx_instr(int type)
@@ -363,6 +368,11 @@ static void handle_p10dd1_spurious_exception(struct perf_event **bp,
 	}
 }
 
+/*
+ * Handle a DABR or DAWR exception.
+ *
+ * Called in atomic context.
+ */
 int hw_breakpoint_handler(struct die_args *args)
 {
 	bool err = false;
@@ -490,6 +500,8 @@ NOKPROBE_SYMBOL(hw_breakpoint_handler);
 
 /*
  * Handle single-step exceptions following a DABR hit.
+ *
+ * Called in atomic context.
  */
 static int single_step_dabr_instruction(struct die_args *args)
 {
@@ -541,6 +553,8 @@ NOKPROBE_SYMBOL(single_step_dabr_instruction);
 
 /*
  * Handle debug exception notifications.
+ *
+ * Called in atomic context.
  */
 int hw_breakpoint_exceptions_notify(
 		struct notifier_block *unused, unsigned long val, void *data)

arch/powerpc/kernel/hw_breakpoint_constraints.c

@@ -131,8 +131,13 @@ void wp_get_instr_detail(struct pt_regs *regs, ppc_inst_t *instr,
 			 int *type, int *size, unsigned long *ea)
 {
 	struct instruction_op op;
+	int err;
 
-	if (__get_user_instr(*instr, (void __user *)regs->nip))
+	pagefault_disable();
+	err = __get_user_instr(*instr, (void __user *)regs->nip);
+	pagefault_enable();
+
+	if (err)
 		return;
 
 	analyse_instr(&op, regs, *instr);

arch/powerpc/kernel/traps.c

@@ -1512,23 +1512,11 @@ static void do_program_check(struct pt_regs *regs)
 			return;
 		}
 
-		if (cpu_has_feature(CPU_FTR_DEXCR_NPHIE) && user_mode(regs)) {
-			ppc_inst_t insn;
-
-			if (get_user_instr(insn, (void __user *)regs->nip)) {
-				_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
-				return;
-			}
-
-			if (ppc_inst_primary_opcode(insn) == 31 &&
-			    get_xop(ppc_inst_val(insn)) == OP_31_XOP_HASHCHK) {
-				_exception(SIGILL, regs, ILL_ILLOPN, regs->nip);
-				return;
-			}
+		/* User mode considers other cases after enabling IRQs */
+		if (!user_mode(regs)) {
+			_exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip);
+			return;
 		}
-
-		_exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip);
-		return;
 	}
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	if (reason & REASON_TM) {
@@ -1561,16 +1549,44 @@ static void do_program_check(struct pt_regs *regs)
 
 	/*
 	 * If we took the program check in the kernel skip down to sending a
-	 * SIGILL. The subsequent cases all relate to emulating instructions
-	 * which we should only do for userspace. We also do not want to enable
-	 * interrupts for kernel faults because that might lead to further
-	 * faults, and loose the context of the original exception.
+	 * SIGILL. The subsequent cases all relate to user space, such as
+	 * emulating instructions which we should only do for user space. We
+	 * also do not want to enable interrupts for kernel faults because that
+	 * might lead to further faults, and loose the context of the original
+	 * exception.
 	 */
 	if (!user_mode(regs))
 		goto sigill;
 
 	interrupt_cond_local_irq_enable(regs);
 
+	/*
+	 * (reason & REASON_TRAP) is mostly handled before enabling IRQs,
+	 * except get_user_instr() can sleep so we cannot reliably inspect the
+	 * current instruction in that context. Now that we know we are
+	 * handling a user space trap and can sleep, we can check if the trap
+	 * was a hashchk failure.
+	 */
+	if (reason & REASON_TRAP) {
+		if (cpu_has_feature(CPU_FTR_DEXCR_NPHIE)) {
+			ppc_inst_t insn;
+
+			if (get_user_instr(insn, (void __user *)regs->nip)) {
+				_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+				return;
+			}
+
+			if (ppc_inst_primary_opcode(insn) == 31 &&
+			    get_xop(ppc_inst_val(insn)) == OP_31_XOP_HASHCHK) {
+				_exception(SIGILL, regs, ILL_ILLOPN, regs->nip);
+				return;
+			}
+		}
+
+		_exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip);
+		return;
+	}
+
 	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
 	 * but there seems to be a hardware bug on the 405GP (RevD)
 	 * that means ESR is sometimes set incorrectly - either to

arch/powerpc/perf/hv-24x7.c

@@ -1418,7 +1418,7 @@ static int h_24x7_event_init(struct perf_event *event)
 	}
 
 	domain = event_get_domain(event);
-	if (domain >= HV_PERF_DOMAIN_MAX) {
+	if (domain  == 0 || domain >= HV_PERF_DOMAIN_MAX) {
 		pr_devel("invalid domain %d\n", domain);
 		return -EINVAL;
 	}

arch/powerpc/platforms/82xx/Kconfig

@@ -2,6 +2,7 @@
 menuconfig PPC_82xx
 	bool "82xx-based boards (PQ II)"
 	depends on PPC_BOOK3S_32
+	select FSL_SOC
 
 if PPC_82xx
 
@@ -9,7 +10,6 @@ config EP8248E
 	bool "Embedded Planet EP8248E (a.k.a. CWH-PPC-8248N-VE)"
 	select CPM2
 	select PPC_INDIRECT_PCI if PCI
-	select FSL_SOC
 	select PHYLIB if NETDEVICES
 	select MDIO_BITBANG if PHYLIB
 	help
@@ -22,7 +22,6 @@ config MGCOGE
 	bool "Keymile MGCOGE"
 	select CPM2
 	select PPC_INDIRECT_PCI if PCI
-	select FSL_SOC
 	help
 	  This enables support for the Keymile MGCOGE board.
 

arch/riscv/include/asm/errata_list.h

@@ -105,7 +105,7 @@ asm volatile(ALTERNATIVE(						\
  * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
  *   0000001    01001      rs1       000      00000  0001011
  * dcache.cva rs1 (clean, virtual address)
- *   0000001    00100      rs1       000      00000  0001011
+ *   0000001    00101      rs1       000      00000  0001011
  *
  * dcache.cipa rs1 (clean then invalidate, physical address)
  * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
@@ -118,7 +118,7 @@ asm volatile(ALTERNATIVE(						\
  *   0000000    11001     00000      000      00000  0001011
  */
 #define THEAD_inval_A0	".long 0x0265000b"
-#define THEAD_clean_A0	".long 0x0245000b"
+#define THEAD_clean_A0	".long 0x0255000b"
 #define THEAD_flush_A0	".long 0x0275000b"
 #define THEAD_SYNC_S	".long 0x0190000b"
 

arch/riscv/kernel/elf_kexec.c

@@ -98,7 +98,13 @@ static int elf_find_pbase(struct kimage *image, unsigned long kernel_len,
 	kbuf.image = image;
 	kbuf.buf_min = lowest_paddr;
 	kbuf.buf_max = ULONG_MAX;
-	kbuf.buf_align = PAGE_SIZE;
+
+	/*
+	 * Current riscv boot protocol requires 2MB alignment for
+	 * RV64 and 4MB alignment for RV32
+	 *
+	 */
+	kbuf.buf_align = PMD_SIZE;
 	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
 	kbuf.memsz = ALIGN(kernel_len, PAGE_SIZE);
 	kbuf.top_down = false;

arch/x86/Kconfig

@@ -1945,6 +1945,7 @@ config EFI
 	select UCS2_STRING
 	select EFI_RUNTIME_WRAPPERS
 	select ARCH_USE_MEMREMAP_PROT
+	select EFI_RUNTIME_MAP if KEXEC_CORE
 	help
 	  This enables the kernel to use EFI runtime services that are
 	  available (such as the EFI variable services).
@@ -2020,7 +2021,6 @@ config EFI_MAX_FAKE_MEM
 config EFI_RUNTIME_MAP
 	bool "Export EFI runtime maps to sysfs" if EXPERT
 	depends on EFI
-	default KEXEC_CORE
 	help
 	  Export EFI runtime memory regions to /sys/firmware/efi/runtime-map.
 	  That memory map is required by the 2nd kernel to set up EFI virtual

arch/x86/boot/compressed/ident_map_64.c

@@ -59,6 +59,14 @@ static void *alloc_pgt_page(void *context)
 		return NULL;
 	}
 
+	/* Consumed more tables than expected? */
+	if (pages->pgt_buf_offset == BOOT_PGT_SIZE_WARN) {
+		debug_putstr("pgt_buf running low in " __FILE__ "\n");
+		debug_putstr("Need to raise BOOT_PGT_SIZE?\n");
+		debug_putaddr(pages->pgt_buf_offset);
+		debug_putaddr(pages->pgt_buf_size);
+	}
+
 	entry = pages->pgt_buf + pages->pgt_buf_offset;
 	pages->pgt_buf_offset += PAGE_SIZE;
 

arch/x86/entry/common.c

@@ -294,7 +294,7 @@ static void __xen_pv_evtchn_do_upcall(struct pt_regs *regs)
 
 	inc_irq_stat(irq_hv_callback_count);
 
-	xen_hvm_evtchn_do_upcall();
+	xen_evtchn_do_upcall();
 
 	set_irq_regs(old_regs);
 }

arch/x86/include/asm/boot.h

@@ -40,23 +40,40 @@
 #ifdef CONFIG_X86_64
 # define BOOT_STACK_SIZE	0x4000
 
+/*
+ * Used by decompressor's startup_32() to allocate page tables for identity
+ * mapping of the 4G of RAM in 4-level paging mode:
+ * - 1 level4 table;
+ * - 1 level3 table;
+ * - 4 level2 table that maps everything with 2M pages;
+ *
+ * The additional level5 table needed for 5-level paging is allocated from
+ * trampoline_32bit memory.
+ */
 # define BOOT_INIT_PGT_SIZE	(6*4096)
-# ifdef CONFIG_RANDOMIZE_BASE
+
 /*
- * Assuming all cross the 512GB boundary:
- * 1 page for level4
- * (2+2)*4 pages for kernel, param, cmd_line, and randomized kernel
- * 2 pages for first 2M (video RAM: CONFIG_X86_VERBOSE_BOOTUP).
- * Total is 19 pages.
+ * Total number of page tables kernel_add_identity_map() can allocate,
+ * including page tables consumed by startup_32().
+ *
+ * Worst-case scenario:
+ *  - 5-level paging needs 1 level5 table;
+ *  - KASLR needs to map kernel, boot_params, cmdline and randomized kernel,
+ *    assuming all of them cross 256T boundary:
+ *    + 4*2 level4 table;
+ *    + 4*2 level3 table;
+ *    + 4*2 level2 table;
+ *  - X86_VERBOSE_BOOTUP needs to map the first 2M (video RAM):
+ *    + 1 level4 table;
+ *    + 1 level3 table;
+ *    + 1 level2 table;
+ * Total: 28 tables
+ *
+ * Add 4 spare table in case decompressor touches anything beyond what is
+ * accounted above. Warn if it happens.
  */
-#  ifdef CONFIG_X86_VERBOSE_BOOTUP
-#   define BOOT_PGT_SIZE	(19*4096)
-#  else /* !CONFIG_X86_VERBOSE_BOOTUP */
-#   define BOOT_PGT_SIZE	(17*4096)
-#  endif
-# else /* !CONFIG_RANDOMIZE_BASE */
-#  define BOOT_PGT_SIZE		BOOT_INIT_PGT_SIZE
-# endif
+# define BOOT_PGT_SIZE_WARN	(28*4096)
+# define BOOT_PGT_SIZE		(32*4096)
 
 #else /* !CONFIG_X86_64 */
 # define BOOT_STACK_SIZE	0x1000

arch/x86/include/asm/efi.h

@@ -91,19 +91,6 @@ static inline void efi_fpu_end(void)
 
 #ifdef CONFIG_X86_32
 #define EFI_X86_KERNEL_ALLOC_LIMIT		(SZ_512M - 1)
-
-#define arch_efi_call_virt_setup()					\
-({									\
-	efi_fpu_begin();						\
-	firmware_restrict_branch_speculation_start();			\
-})
-
-#define arch_efi_call_virt_teardown()					\
-({									\
-	firmware_restrict_branch_speculation_end();			\
-	efi_fpu_end();							\
-})
-
 #else /* !CONFIG_X86_32 */
 #define EFI_X86_KERNEL_ALLOC_LIMIT		EFI_ALLOC_LIMIT
 
@@ -116,14 +103,6 @@ extern bool efi_disable_ibt_for_runtime;
 	__efi_call(__VA_ARGS__);					\
 })
 
-#define arch_efi_call_virt_setup()					\
-({									\
-	efi_sync_low_kernel_mappings();					\
-	efi_fpu_begin();						\
-	firmware_restrict_branch_speculation_start();			\
-	efi_enter_mm();							\
-})
-
 #undef arch_efi_call_virt
 #define arch_efi_call_virt(p, f, args...) ({				\
 	u64 ret, ibt = ibt_save(efi_disable_ibt_for_runtime);		\
@@ -132,13 +111,6 @@ extern bool efi_disable_ibt_for_runtime;
 	ret;								\
 })
 
-#define arch_efi_call_virt_teardown()					\
-({									\
-	efi_leave_mm();							\
-	firmware_restrict_branch_speculation_end();			\
-	efi_fpu_end();							\
-})
-
 #ifdef CONFIG_KASAN
 /*
  * CONFIG_KASAN may redefine memset to __memset.  __memset function is present
@@ -168,8 +140,8 @@ extern void efi_delete_dummy_variable(void);
 extern void efi_crash_gracefully_on_page_fault(unsigned long phys_addr);
 extern void efi_free_boot_services(void);
 
-void efi_enter_mm(void);
-void efi_leave_mm(void);
+void arch_efi_call_virt_setup(void);
+void arch_efi_call_virt_teardown(void);
 
 /* kexec external ABI */
 struct efi_setup_data {

arch/x86/include/asm/linkage.h

@@ -8,6 +8,14 @@
 #undef notrace
 #define notrace __attribute__((no_instrument_function))
 
+#ifdef CONFIG_64BIT
+/*
+ * The generic version tends to create spurious ENDBR instructions under
+ * certain conditions.
+ */
+#define _THIS_IP_ ({ unsigned long __here; asm ("lea 0(%%rip), %0" : "=r" (__here)); __here; })
+#endif
+
 #ifdef CONFIG_X86_32
 #define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
 #endif /* CONFIG_X86_32 */