serial: sh-sci: Add pin initialization for SCIFA/SCIFB

Before, the driver relied on initialization by the boot loader, or by
implicit reset state.

Note that unlike on (H)SCIF, the RTS/CTS bits exist only if dedicated
RTS/CTS pins are available, which depends on the SoC and UART instance.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/sh-sci.c

@@ -712,7 +712,21 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag)
 		return;
 	}
 
-	if (sci_getreg(port, SCSPTR)->size) {
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+		u16 ctrl = serial_port_in(port, SCPCR);
+
+		/* Enable RXD and TXD pin functions */
+		ctrl &= ~(SCPCR_RXDC | SCPCR_TXDC);
+		if (to_sci_port(port)->cfg->capabilities & SCIx_HAVE_RTSCTS) {
+			/* RTS# is output, driven 1 */
+			ctrl |= SCPCR_RTSC;
+			serial_port_out(port, SCPDR,
+				serial_port_in(port, SCPDR) | SCPDR_RTSD);
+			/* Enable CTS# pin function */
+			ctrl &= ~SCPCR_CTSC;
+		}
+		serial_port_out(port, SCPCR, ctrl);
+	} else if (sci_getreg(port, SCSPTR)->size) {
 		u16 status = serial_port_in(port, SCSPTR);
 
 		/* RTS# is output, driven 1 */