net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume()

Commit 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume()
state") introduced a WARN() on resume from system sleep if a PHY is not
in PHY_HALTED state.

Commit 6dbe852c ("net: phy: Don't WARN for PHY_READY state in
mdio_bus_phy_resume()") added an exemption for PHY_READY state from
the WARN().

It turns out PHY_UP state needs to be exempted as well because the
following may happen on suspend:

  mdio_bus_phy_suspend()
    phy_stop_machine()
      phydev->state = PHY_UP  #  if (phydev->state >= PHY_UP)

Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/netdev/2b1a1588-505e-dff3-301d-bfc1fb14d685@samsung.com/Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/8128fdb51eeebc9efbf3776a4097363a1317aaf1.1663905575.git.lukas@wunner.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

drivers/net/phy/phy_device.c

@@ -316,11 +316,13 @@ static __maybe_unused int mdio_bus_phy_resume(struct device *dev)
 
 	phydev->suspended_by_mdio_bus = 0;
 
-	/* If we manged to get here with the PHY state machine in a state neither
-	 * PHY_HALTED nor PHY_READY this is an indication that something went wrong
-	 * and we should most likely be using MAC managed PM and we are not.
+	/* If we managed to get here with the PHY state machine in a state
+	 * neither PHY_HALTED, PHY_READY nor PHY_UP, this is an indication
+	 * that something went wrong and we should most likely be using
+	 * MAC managed PM, but we are not.
 	 */
-	WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY);
+	WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
+		phydev->state != PHY_UP);
 
 	ret = phy_init_hw(phydev);
 	if (ret < 0)