Commit ea78484b authored by Takashi Iwai's avatar Takashi Iwai

Merge branch 'fix/asoc' into for-linus

parents e03fa055 776065e3
......@@ -40,7 +40,6 @@ struct max98088_cdata {
};
struct max98088_priv {
u8 reg_cache[M98088_REG_CNT];
enum max98088_type devtype;
void *control_data;
struct max98088_pdata *pdata;
......@@ -1588,7 +1587,7 @@ static int max98088_dai2_set_fmt(struct snd_soc_dai *codec_dai,
static void max98088_sync_cache(struct snd_soc_codec *codec)
{
struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int i;
if (!codec->cache_sync)
......@@ -1599,14 +1598,14 @@ static void max98088_sync_cache(struct snd_soc_codec *codec)
/* write back cached values if they're writeable and
* different from the hardware default.
*/
for (i = 1; i < ARRAY_SIZE(max98088->reg_cache); i++) {
for (i = 1; i < codec->driver->reg_cache_size; i++) {
if (!max98088_access[i].writable)
continue;
if (max98088->reg_cache[i] == max98088_reg[i])
if (reg_cache[i] == max98088_reg[i])
continue;
snd_soc_write(codec, i, max98088->reg_cache[i]);
snd_soc_write(codec, i, reg_cache[i]);
}
codec->cache_sync = 0;
......@@ -1951,7 +1950,6 @@ static int max98088_probe(struct snd_soc_codec *codec)
int ret = 0;
codec->cache_sync = 1;
memcpy(codec->reg_cache, max98088_reg, sizeof(max98088_reg));
ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C);
if (ret != 0) {
......
......@@ -41,7 +41,6 @@ static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = {
/* codec private data */
struct wm8523_priv {
enum snd_soc_control_type control_type;
u16 reg_cache[WM8523_REGISTER_COUNT];
struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES];
unsigned int sysclk;
unsigned int rate_constraint_list[WM8523_NUM_RATES];
......@@ -314,6 +313,7 @@ static int wm8523_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int ret, i;
switch (level) {
......@@ -344,7 +344,7 @@ static int wm8523_set_bias_level(struct snd_soc_codec *codec,
/* Sync back default/cached values */
for (i = WM8523_AIF_CTRL1;
i < WM8523_MAX_REGISTER; i++)
snd_soc_write(codec, i, wm8523->reg_cache[i]);
snd_soc_write(codec, i, reg_cache[i]);
msleep(100);
......@@ -414,6 +414,7 @@ static int wm8523_resume(struct snd_soc_codec *codec)
static int wm8523_probe(struct snd_soc_codec *codec)
{
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int ret, i;
codec->hw_write = (hw_write_t)i2c_master_send;
......@@ -470,8 +471,8 @@ static int wm8523_probe(struct snd_soc_codec *codec)
}
/* Change some default settings - latch VU and enable ZC */
wm8523->reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
wm8523->reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
......
......@@ -41,7 +41,6 @@ static const char *wm8741_supply_names[WM8741_NUM_SUPPLIES] = {
/* codec private data */
struct wm8741_priv {
enum snd_soc_control_type control_type;
u16 reg_cache[WM8741_REGISTER_COUNT];
struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES];
unsigned int sysclk;
struct snd_pcm_hw_constraint_list *sysclk_constraints;
......@@ -422,6 +421,7 @@ static int wm8741_resume(struct snd_soc_codec *codec)
static int wm8741_probe(struct snd_soc_codec *codec)
{
struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int ret = 0;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8741->control_type);
......@@ -437,10 +437,10 @@ static int wm8741_probe(struct snd_soc_codec *codec)
}
/* Change some default settings - latch VU */
wm8741->reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL;
wm8741->reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM;
wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL;
wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM;
reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL;
reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM;
reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL;
reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM;
snd_soc_add_controls(codec, wm8741_snd_controls,
ARRAY_SIZE(wm8741_snd_controls));
......
This diff is collapsed.
......@@ -50,8 +50,6 @@ static const char *wm8904_supply_names[WM8904_NUM_SUPPLIES] = {
/* codec private data */
struct wm8904_priv {
u16 reg_cache[WM8904_MAX_REGISTER + 1];
enum wm8904_type devtype;
void *control_data;
......@@ -2094,7 +2092,7 @@ static int wm8904_digital_mute(struct snd_soc_dai *codec_dai, int mute)
static void wm8904_sync_cache(struct snd_soc_codec *codec)
{
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int i;
if (!codec->cache_sync)
......@@ -2105,14 +2103,14 @@ static void wm8904_sync_cache(struct snd_soc_codec *codec)
/* Sync back cached values if they're different from the
* hardware default.
*/
for (i = 1; i < ARRAY_SIZE(wm8904->reg_cache); i++) {
for (i = 1; i < codec->driver->reg_cache_size; i++) {
if (!wm8904_access[i].writable)
continue;
if (wm8904->reg_cache[i] == wm8904_reg[i])
if (reg_cache[i] == wm8904_reg[i])
continue;
snd_soc_write(codec, i, wm8904->reg_cache[i]);
snd_soc_write(codec, i, reg_cache[i]);
}
codec->cache_sync = 0;
......@@ -2371,6 +2369,7 @@ static int wm8904_probe(struct snd_soc_codec *codec)
{
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
struct wm8904_pdata *pdata = wm8904->pdata;
u16 *reg_cache = codec->reg_cache;
int ret, i;
codec->cache_sync = 1;
......@@ -2437,19 +2436,19 @@ static int wm8904_probe(struct snd_soc_codec *codec)
}
/* Change some default settings - latch VU and enable ZC */
wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
wm8904->reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
WM8904_HPOUTLZC;
wm8904->reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
WM8904_HPOUTRZC;
wm8904->reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
WM8904_LINEOUTLZC;
wm8904->reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
WM8904_LINEOUTRZC;
wm8904->reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
/* Apply configuration from the platform data. */
if (wm8904->pdata) {
......@@ -2457,23 +2456,23 @@ static int wm8904_probe(struct snd_soc_codec *codec)
if (!pdata->gpio_cfg[i])
continue;
wm8904->reg_cache[WM8904_GPIO_CONTROL_1 + i]
reg_cache[WM8904_GPIO_CONTROL_1 + i]
= pdata->gpio_cfg[i] & 0xffff;
}
/* Zero is the default value for these anyway */
for (i = 0; i < WM8904_MIC_REGS; i++)
wm8904->reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
= pdata->mic_cfg[i];
}
/* Set Class W by default - this will be managed by the Class
* G widget at runtime where bypass paths are available.
*/
wm8904->reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
/* Use normal bias source */
wm8904->reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
......
......@@ -768,6 +768,7 @@ static __devinit int wm8940_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm8940);
wm8940->control_data = i2c;
wm8940->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8940, &wm8940_dai, 1);
......
......@@ -42,8 +42,6 @@ static const char *wm8955_supply_names[WM8955_NUM_SUPPLIES] = {
struct wm8955_priv {
enum snd_soc_control_type control_type;
u16 reg_cache[WM8955_MAX_REGISTER + 1];
unsigned int mclk_rate;
int deemph;
......@@ -768,6 +766,7 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int ret, i;
switch (level) {
......@@ -800,14 +799,14 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
/* Sync back cached values if they're
* different from the hardware default.
*/
for (i = 0; i < ARRAY_SIZE(wm8955->reg_cache); i++) {
for (i = 0; i < codec->driver->reg_cache_size; i++) {
if (i == WM8955_RESET)
continue;
if (wm8955->reg_cache[i] == wm8955_reg[i])
if (reg_cache[i] == wm8955_reg[i])
continue;
snd_soc_write(codec, i, wm8955->reg_cache[i]);
snd_soc_write(codec, i, reg_cache[i]);
}
/* Enable VREF and VMID */
......@@ -902,6 +901,7 @@ static int wm8955_probe(struct snd_soc_codec *codec)
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
struct wm8955_pdata *pdata = dev_get_platdata(codec->dev);
u16 *reg_cache = codec->reg_cache;
int ret, i;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8955->control_type);
......@@ -934,25 +934,25 @@ static int wm8955_probe(struct snd_soc_codec *codec)
}
/* Change some default settings - latch VU and enable ZC */
wm8955->reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
wm8955->reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
wm8955->reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
wm8955->reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
wm8955->reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
wm8955->reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
wm8955->reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
/* Also enable adaptive bass boost by default */
wm8955->reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
/* Set platform data values */
if (pdata) {
if (pdata->out2_speaker)
wm8955->reg_cache[WM8955_ADDITIONAL_CONTROL_2]
reg_cache[WM8955_ADDITIONAL_CONTROL_2]
|= WM8955_ROUT2INV;
if (pdata->monoin_diff)
wm8955->reg_cache[WM8955_MONO_OUT_MIX_1]
reg_cache[WM8955_MONO_OUT_MIX_1]
|= WM8955_DMEN;
}
......@@ -1003,6 +1003,7 @@ static __devinit int wm8955_i2c_probe(struct i2c_client *i2c,
return -ENOMEM;
i2c_set_clientdata(i2c, wm8955);
wm8955->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8955, &wm8955_dai, 1);
......
......@@ -1013,6 +1013,7 @@ static __devinit int wm8960_i2c_probe(struct i2c_client *i2c,
return -ENOMEM;
i2c_set_clientdata(i2c, wm8960);
wm8960->control_type = SND_SOC_I2C;
wm8960->control_data = i2c;
ret = snd_soc_register_codec(&i2c->dev,
......
......@@ -52,8 +52,6 @@ static const char *wm8962_supply_names[WM8962_NUM_SUPPLIES] = {
struct wm8962_priv {
struct snd_soc_codec *codec;
u16 reg_cache[WM8962_MAX_REGISTER + 1];
int sysclk;
int sysclk_rate;
......@@ -1991,8 +1989,7 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = wm8962->reg_cache;
u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
......@@ -2020,8 +2017,7 @@ static int wm8962_put_spk_sw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = wm8962->reg_cache;
u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
......@@ -2329,8 +2325,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = wm8962->reg_cache;
u16 *reg_cache = codec->reg_cache;
int reg;
switch (w->shift) {
......@@ -2719,7 +2714,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec)
static void wm8962_sync_cache(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int i;
if (!codec->cache_sync)
......@@ -2732,13 +2727,13 @@ static void wm8962_sync_cache(struct snd_soc_codec *codec)
/* Sync back cached values if they're different from the
* hardware default.
*/
for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) {
for (i = 1; i < codec->driver->reg_cache_size; i++) {
if (i == WM8962_SOFTWARE_RESET)
continue;
if (wm8962->reg_cache[i] == wm8962_reg[i])
if (reg_cache[i] == wm8962_reg[i])
continue;
snd_soc_write(codec, i, wm8962->reg_cache[i]);
snd_soc_write(codec, i, reg_cache[i]);
}
codec->cache_sync = 0;
......@@ -3406,12 +3401,11 @@ EXPORT_SYMBOL_GPL(wm8962_mic_detect);
#ifdef CONFIG_PM
static int wm8962_resume(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int i;
/* Restore the registers */
for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) {
for (i = 1; i < codec->driver->reg_cache_size; i++) {
switch (i) {
case WM8962_SOFTWARE_RESET:
continue;
......@@ -3705,6 +3699,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
struct i2c_client *i2c = container_of(codec->dev, struct i2c_client,
dev);
u16 *reg_cache = codec->reg_cache;
int i, trigger, irq_pol;
wm8962->codec = codec;
......@@ -3804,7 +3799,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
/* Put the speakers into mono mode? */
if (pdata->spk_mono)
wm8962->reg_cache[WM8962_CLASS_D_CONTROL_2]
reg_cache[WM8962_CLASS_D_CONTROL_2]
|= WM8962_SPK_MONO;
/* Micbias setup, detection enable and detection
......@@ -3819,16 +3814,16 @@ static int wm8962_probe(struct snd_soc_codec *codec)
}
/* Latch volume update bits */
wm8962->reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
wm8962->reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
wm8962->reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
wm8962->reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;
wm8962->reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
wm8962->reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
wm8962->reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
wm8962->reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
wm8962->reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
wm8962->reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;
reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
wm8962_add_widgets(codec);
......
......@@ -718,6 +718,7 @@ static __devinit int wm8971_i2c_probe(struct i2c_client *i2c,
if (wm8971 == NULL)
return -ENOMEM;
wm8971->control_type = SND_SOC_I2C;
i2c_set_clientdata(i2c, wm8971);
ret = snd_soc_register_codec(&i2c->dev,
......
......@@ -1335,6 +1335,7 @@ static __devinit int wm9081_i2c_probe(struct i2c_client *i2c,
return -ENOMEM;
i2c_set_clientdata(i2c, wm9081);
wm9081->control_type = SND_SOC_I2C;
wm9081->control_data = i2c;
ret = snd_soc_register_codec(&i2c->dev,
......
......@@ -141,7 +141,6 @@ static const u16 wm9090_reg_defaults[] = {
/* This struct is used to save the context */
struct wm9090_priv {
struct mutex mutex;
u16 reg_cache[WM9090_MAX_REGISTER + 1];
struct wm9090_platform_data pdata;
void *control_data;
};
......@@ -552,6 +551,7 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
static int wm9090_probe(struct snd_soc_codec *codec)
{
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int ret;
codec->control_data = wm9090->control_data;
......@@ -576,22 +576,22 @@ static int wm9090_probe(struct snd_soc_codec *codec)
/* Configure some defaults; they will be written out when we
* bring the bias up.
*/
wm9090->reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU
reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU
| WM9090_IN1A_ZC;
wm9090->reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU
reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU
| WM9090_IN1B_ZC;
wm9090->reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU
reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU
| WM9090_IN2A_ZC;
wm9090->reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU
reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU
| WM9090_IN2B_ZC;
wm9090->reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |=
reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |=
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC;
wm9090->reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |=
reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |=
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC;
wm9090->reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |=
reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |=
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC;
wm9090->reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA;
reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA;
wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment