Commit eacdd6c2 authored by Steve Glendinning's avatar Steve Glendinning Committed by David S. Miller

smsc75xx: fix error handling in suspend failure case

This patch ensures that if we fail to suspend the LAN7500 device
we call usbnet_resume before returning failure, instead of
leaving the usbnet driver in an unusable state.
Signed-off-by: default avatarSteve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f329ccdc
......@@ -1346,7 +1346,7 @@ static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
int ret;
ret = usbnet_suspend(intf, message);
check_warn_return(ret, "usbnet_suspend error\n");
check_warn_goto_done(ret, "usbnet_suspend error\n");
/* determine if link is up using only _nopm functions */
link_up = smsc75xx_link_ok_nopm(dev);
......@@ -1360,28 +1360,29 @@ static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
/* disable energy detect (link up) & wake up events */
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
check_warn_return(ret, "Error reading WUCSR\n");
check_warn_goto_done(ret, "Error reading WUCSR\n");
val &= ~(WUCSR_MPEN | WUCSR_WUEN);
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
check_warn_return(ret, "Error writing WUCSR\n");
check_warn_goto_done(ret, "Error writing WUCSR\n");
ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
check_warn_return(ret, "Error reading PMT_CTL\n");
check_warn_goto_done(ret, "Error reading PMT_CTL\n");
val &= ~(PMT_CTL_ED_EN | PMT_CTL_WOL_EN);
ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
check_warn_return(ret, "Error writing PMT_CTL\n");
check_warn_goto_done(ret, "Error writing PMT_CTL\n");
return smsc75xx_enter_suspend2(dev);
ret = smsc75xx_enter_suspend2(dev);
goto done;
}
if (pdata->wolopts & WAKE_PHY) {
ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
(PHY_INT_MASK_ANEG_COMP | PHY_INT_MASK_LINK_DOWN));
check_warn_return(ret, "error enabling PHY wakeup ints\n");
check_warn_goto_done(ret, "error enabling PHY wakeup ints\n");
/* if link is down then configure EDPD and enter SUSPEND1,
* otherwise enter SUSPEND0 below
......@@ -1393,7 +1394,7 @@ static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
/* enable energy detect power-down mode */
ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id,
PHY_MODE_CTRL_STS);
check_warn_return(ret, "Error reading PHY_MODE_CTRL_STS\n");
check_warn_goto_done(ret, "Error reading PHY_MODE_CTRL_STS\n");
ret |= MODE_CTRL_STS_EDPWRDOWN;
......@@ -1401,7 +1402,8 @@ static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
PHY_MODE_CTRL_STS, ret);
/* enter SUSPEND1 mode */
return smsc75xx_enter_suspend1(dev);
ret = smsc75xx_enter_suspend1(dev);
goto done;
}
}
......@@ -1411,7 +1413,7 @@ static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
/* disable all filters */
for (i = 0; i < WUF_NUM; i++) {
ret = smsc75xx_write_reg_nopm(dev, WUF_CFGX + i * 4, 0);
check_warn_return(ret, "Error writing WUF_CFGX\n");
check_warn_goto_done(ret, "Error writing WUF_CFGX\n");
}
if (pdata->wolopts & WAKE_MCAST) {
......@@ -1421,7 +1423,7 @@ static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
val = WUF_CFGX_EN | WUF_CFGX_ATYPE_MULTICAST
| smsc_crc(mcast, 3);
ret = smsc75xx_write_wuff(dev, filter++, val, 0x0007);
check_warn_return(ret, "Error writing wakeup filter\n");
check_warn_goto_done(ret, "Error writing wakeup filter\n");
}
if (pdata->wolopts & WAKE_ARP) {
......@@ -1431,106 +1433,111 @@ static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
val = WUF_CFGX_EN | WUF_CFGX_ATYPE_ALL | (0x0C << 16)
| smsc_crc(arp, 2);
ret = smsc75xx_write_wuff(dev, filter++, val, 0x0003);
check_warn_return(ret, "Error writing wakeup filter\n");
check_warn_goto_done(ret, "Error writing wakeup filter\n");
}
/* clear any pending pattern match packet status */
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
check_warn_return(ret, "Error reading WUCSR\n");
check_warn_goto_done(ret, "Error reading WUCSR\n");
val |= WUCSR_WUFR;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
check_warn_return(ret, "Error writing WUCSR\n");
check_warn_goto_done(ret, "Error writing WUCSR\n");
netdev_info(dev->net, "enabling packet match detection\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
check_warn_return(ret, "Error reading WUCSR\n");
check_warn_goto_done(ret, "Error reading WUCSR\n");
val |= WUCSR_WUEN;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
check_warn_return(ret, "Error writing WUCSR\n");
check_warn_goto_done(ret, "Error writing WUCSR\n");
} else {
netdev_info(dev->net, "disabling packet match detection\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
check_warn_return(ret, "Error reading WUCSR\n");
check_warn_goto_done(ret, "Error reading WUCSR\n");
val &= ~WUCSR_WUEN;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
check_warn_return(ret, "Error writing WUCSR\n");
check_warn_goto_done(ret, "Error writing WUCSR\n");
}
/* disable magic, bcast & unicast wakeup sources */
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
check_warn_return(ret, "Error reading WUCSR\n");
check_warn_goto_done(ret, "Error reading WUCSR\n");
val &= ~(WUCSR_MPEN | WUCSR_BCST_EN | WUCSR_PFDA_EN);
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
check_warn_return(ret, "Error writing WUCSR\n");
check_warn_goto_done(ret, "Error writing WUCSR\n");
if (pdata->wolopts & WAKE_PHY) {
netdev_info(dev->net, "enabling PHY wakeup\n");
ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
check_warn_return(ret, "Error reading PMT_CTL\n");
check_warn_goto_done(ret, "Error reading PMT_CTL\n");
/* clear wol status, enable energy detection */
val &= ~PMT_CTL_WUPS;
val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN);
ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
check_warn_return(ret, "Error writing PMT_CTL\n");
check_warn_goto_done(ret, "Error writing PMT_CTL\n");
}
if (pdata->wolopts & WAKE_MAGIC) {
netdev_info(dev->net, "enabling magic packet wakeup\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
check_warn_return(ret, "Error reading WUCSR\n");
check_warn_goto_done(ret, "Error reading WUCSR\n");
/* clear any pending magic packet status */
val |= WUCSR_MPR | WUCSR_MPEN;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
check_warn_return(ret, "Error writing WUCSR\n");
check_warn_goto_done(ret, "Error writing WUCSR\n");
}
if (pdata->wolopts & WAKE_BCAST) {
netdev_info(dev->net, "enabling broadcast detection\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
check_warn_return(ret, "Error reading WUCSR\n");
check_warn_goto_done(ret, "Error reading WUCSR\n");
val |= WUCSR_BCAST_FR | WUCSR_BCST_EN;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
check_warn_return(ret, "Error writing WUCSR\n");
check_warn_goto_done(ret, "Error writing WUCSR\n");
}
if (pdata->wolopts & WAKE_UCAST) {
netdev_info(dev->net, "enabling unicast detection\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
check_warn_return(ret, "Error reading WUCSR\n");
check_warn_goto_done(ret, "Error reading WUCSR\n");
val |= WUCSR_WUFR | WUCSR_PFDA_EN;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
check_warn_return(ret, "Error writing WUCSR\n");
check_warn_goto_done(ret, "Error writing WUCSR\n");
}
/* enable receiver to enable frame reception */
ret = smsc75xx_read_reg_nopm(dev, MAC_RX, &val);
check_warn_return(ret, "Failed to read MAC_RX: %d\n", ret);
check_warn_goto_done(ret, "Failed to read MAC_RX: %d\n", ret);
val |= MAC_RX_RXEN;
ret = smsc75xx_write_reg_nopm(dev, MAC_RX, val);
check_warn_return(ret, "Failed to write MAC_RX: %d\n", ret);
check_warn_goto_done(ret, "Failed to write MAC_RX: %d\n", ret);
/* some wol options are enabled, so enter SUSPEND0 */
netdev_info(dev->net, "entering SUSPEND0 mode\n");
return smsc75xx_enter_suspend0(dev);
ret = smsc75xx_enter_suspend0(dev);
done:
if (ret)
usbnet_resume(intf);
return ret;
}
static int smsc75xx_resume(struct usb_interface *intf)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment