Commit ec08bdb1 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'omap-fixes-for-linus' of...

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (27 commits)
  omap4: Fix ULPI PHY init for ES1.0 SDP
  omap3: beaglexm: fix power on of DVI
  omap3: igep3: Add omap_reserve functionality
  omap3: beaglexm: fix DVI reset GPIO
  omap3: beaglexm: fix EHCI power up GPIO dir
  omap3: igep2: Add keypad support
  omap3: igep3: Fix IGEP module second MMC channel power supply
  omap3: igep3: Add USB EHCI support for IGEP module
  omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  arm: omap4: pandaboard: turn on PHY reference clock at init
  omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared
  omap2plus: voltage: Trivial linking fix 'undefined reference'
  omap2plus: voltage: Trivial warning fix 'no return statement'
  omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  arm: omap: gpio: don't access irq_desc array directly
  omap2+: pm_bus: make functions used as pointers as static
  OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  OMAP2+: TWL: include pm header for init protos
  OMAP2+: TWL: make conversion routines static
  ...

Fix up conflicts in arch/arm/mach-omap2/board-omap3beagle.c ("DVI reset
GPIO" vs "use generic DPI panel driver")
parents 9cefa17e 7d4ca85a
...@@ -554,6 +554,7 @@ static void __init omap_sfh7741prox_init(void) ...@@ -554,6 +554,7 @@ static void __init omap_sfh7741prox_init(void)
#ifdef CONFIG_OMAP_MUX #ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = { static struct omap_board_mux board_mux[] __initdata = {
OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR }, { .reg_offset = OMAP_MUX_TERMINATOR },
}; };
#else #else
...@@ -576,11 +577,12 @@ static void __init omap_4430sdp_init(void) ...@@ -576,11 +577,12 @@ static void __init omap_4430sdp_init(void)
omap4_twl6030_hsmmc_init(mmc); omap4_twl6030_hsmmc_init(mmc);
/* Power on the ULPI PHY */ /* Power on the ULPI PHY */
if (gpio_is_valid(OMAP4SDP_MDM_PWR_EN_GPIO)) { status = gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3");
/* FIXME: Assumes pad is already muxed for GPIO mode */ if (status)
gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3"); pr_err("%s: Could not get USBB1 PHY GPIO\n", __func__);
else
gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1); gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
}
usb_ehci_init(&ehci_pdata); usb_ehci_init(&ehci_pdata);
usb_musb_init(&musb_board_data); usb_musb_init(&musb_board_data);
......
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/regulator/machine.h> #include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h> #include <linux/regulator/fixed.h>
...@@ -541,6 +542,37 @@ static struct twl4030_codec_data igep2_codec_data = { ...@@ -541,6 +542,37 @@ static struct twl4030_codec_data igep2_codec_data = {
.audio = &igep2_audio_data, .audio = &igep2_audio_data,
}; };
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_A),
KEY(0, 3, KEY_B),
KEY(1, 0, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_E),
KEY(1, 3, KEY_F),
KEY(2, 0, KEY_ENTER),
KEY(2, 1, KEY_I),
KEY(2, 2, KEY_J),
KEY(2, 3, KEY_K),
KEY(3, 0, KEY_M),
KEY(3, 1, KEY_N),
KEY(3, 2, KEY_O),
KEY(3, 3, KEY_P)
};
static struct matrix_keymap_data igep2_keymap_data = {
.keymap = igep2_keymap,
.keymap_size = ARRAY_SIZE(igep2_keymap),
};
static struct twl4030_keypad_data igep2_keypad_pdata = {
.keymap_data = &igep2_keymap_data,
.rows = 4,
.cols = 4,
.rep = 1,
};
static struct twl4030_platform_data igep2_twldata = { static struct twl4030_platform_data igep2_twldata = {
.irq_base = TWL4030_IRQ_BASE, .irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END, .irq_end = TWL4030_IRQ_END,
...@@ -549,6 +581,7 @@ static struct twl4030_platform_data igep2_twldata = { ...@@ -549,6 +581,7 @@ static struct twl4030_platform_data igep2_twldata = {
.usb = &igep2_usb_data, .usb = &igep2_usb_data,
.codec = &igep2_codec_data, .codec = &igep2_codec_data,
.gpio = &igep2_twl4030_gpio_pdata, .gpio = &igep2_twl4030_gpio_pdata,
.keypad = &igep2_keypad_pdata,
.vmmc1 = &igep2_vmmc1, .vmmc1 = &igep2_vmmc1,
.vpll2 = &igep2_vpll2, .vpll2 = &igep2_vpll2,
.vio = &igep2_vio, .vio = &igep2_vio,
......
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/regulator/machine.h> #include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/i2c/twl.h> #include <linux/i2c/twl.h>
#include <linux/mmc/host.h> #include <linux/mmc/host.h>
...@@ -43,7 +44,7 @@ ...@@ -43,7 +44,7 @@
#define IGEP3_GPIO_WIFI_NRESET 139 #define IGEP3_GPIO_WIFI_NRESET 139
#define IGEP3_GPIO_BT_NRESET 137 #define IGEP3_GPIO_BT_NRESET 137
#define IGEP3_GPIO_USBH_NRESET 115 #define IGEP3_GPIO_USBH_NRESET 183
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
...@@ -103,7 +104,7 @@ static struct platform_device igep3_onenand_device = { ...@@ -103,7 +104,7 @@ static struct platform_device igep3_onenand_device = {
}, },
}; };
void __init igep3_flash_init(void) static void __init igep3_flash_init(void)
{ {
u8 cs = 0; u8 cs = 0;
u8 onenandcs = GPMC_CS_NUM + 1; u8 onenandcs = GPMC_CS_NUM + 1;
...@@ -137,12 +138,11 @@ void __init igep3_flash_init(void) ...@@ -137,12 +138,11 @@ void __init igep3_flash_init(void)
} }
#else #else
void __init igep3_flash_init(void) {} static void __init igep3_flash_init(void) {}
#endif #endif
static struct regulator_consumer_supply igep3_vmmc1_supply = { static struct regulator_consumer_supply igep3_vmmc1_supply =
.supply = "vmmc", REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep3_vmmc1 = { static struct regulator_init_data igep3_vmmc1 = {
...@@ -159,6 +159,52 @@ static struct regulator_init_data igep3_vmmc1 = { ...@@ -159,6 +159,52 @@ static struct regulator_init_data igep3_vmmc1 = {
.consumer_supplies = &igep3_vmmc1_supply, .consumer_supplies = &igep3_vmmc1_supply,
}; };
static struct regulator_consumer_supply igep3_vio_supply =
REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
static struct regulator_init_data igep3_vio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &igep3_vio_supply,
};
static struct regulator_consumer_supply igep3_vmmc2_supply =
REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
static struct regulator_init_data igep3_vmmc2 = {
.constraints = {
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.always_on = 1,
},
.num_consumer_supplies = 1,
.consumer_supplies = &igep3_vmmc2_supply,
};
static struct fixed_voltage_config igep3_vwlan = {
.supply_name = "vwlan",
.microvolts = 3300000,
.gpio = -EINVAL,
.enabled_at_boot = 1,
.init_data = &igep3_vmmc2,
};
static struct platform_device igep3_vwlan_device = {
.name = "reg-fixed-voltage",
.id = 0,
.dev = {
.platform_data = &igep3_vwlan,
},
};
static struct omap2_hsmmc_info mmc[] = { static struct omap2_hsmmc_info mmc[] = {
[0] = { [0] = {
.mmc = 1, .mmc = 1,
...@@ -254,12 +300,6 @@ static int igep3_twl4030_gpio_setup(struct device *dev, ...@@ -254,12 +300,6 @@ static int igep3_twl4030_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0; mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc); omap2_hsmmc_init(mmc);
/*
* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
igep3_vmmc1_supply.dev = mmc[0].dev;
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
...@@ -287,6 +327,10 @@ static struct twl4030_usb_data igep3_twl4030_usb_data = { ...@@ -287,6 +327,10 @@ static struct twl4030_usb_data igep3_twl4030_usb_data = {
.usb_mode = T2_USB_MODE_ULPI, .usb_mode = T2_USB_MODE_ULPI,
}; };
static struct platform_device *igep3_devices[] __initdata = {
&igep3_vwlan_device,
};
static void __init igep3_init_irq(void) static void __init igep3_init_irq(void)
{ {
omap2_init_common_infrastructure(); omap2_init_common_infrastructure();
...@@ -303,6 +347,7 @@ static struct twl4030_platform_data igep3_twl4030_pdata = { ...@@ -303,6 +347,7 @@ static struct twl4030_platform_data igep3_twl4030_pdata = {
.usb = &igep3_twl4030_usb_data, .usb = &igep3_twl4030_usb_data,
.gpio = &igep3_twl4030_gpio_pdata, .gpio = &igep3_twl4030_gpio_pdata,
.vmmc1 = &igep3_vmmc1, .vmmc1 = &igep3_vmmc1,
.vio = &igep3_vio,
}; };
static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = { static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = {
...@@ -363,8 +408,20 @@ static void __init igep3_wifi_bt_init(void) ...@@ -363,8 +408,20 @@ static void __init igep3_wifi_bt_init(void)
void __init igep3_wifi_bt_init(void) {} void __init igep3_wifi_bt_init(void) {}
#endif #endif
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET,
.reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX #ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = { static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR }, { .reg_offset = OMAP_MUX_TERMINATOR },
}; };
#endif #endif
...@@ -375,9 +432,10 @@ static void __init igep3_init(void) ...@@ -375,9 +432,10 @@ static void __init igep3_init(void)
/* Register I2C busses and drivers */ /* Register I2C busses and drivers */
igep3_i2c_init(); igep3_i2c_init();
platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices));
omap_serial_init(); omap_serial_init();
usb_musb_init(&musb_board_data); usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
igep3_flash_init(); igep3_flash_init();
igep3_leds_init(); igep3_leds_init();
...@@ -392,6 +450,7 @@ static void __init igep3_init(void) ...@@ -392,6 +450,7 @@ static void __init igep3_init(void)
MACHINE_START(IGEP0030, "IGEP OMAP3 module") MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.boot_params = 0x80000100, .boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io, .map_io = omap3_map_io,
.init_irq = igep3_init_irq, .init_irq = igep3_init_irq,
.init_machine = igep3_init, .init_machine = igep3_init,
......
...@@ -207,7 +207,7 @@ static struct omap_dss_device beagle_dvi_device = { ...@@ -207,7 +207,7 @@ static struct omap_dss_device beagle_dvi_device = {
.driver_name = "generic_dpi_panel", .driver_name = "generic_dpi_panel",
.data = &dvi_panel, .data = &dvi_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.reset_gpio = 170, .reset_gpio = -EINVAL,
}; };
static struct omap_dss_device beagle_tv_device = { static struct omap_dss_device beagle_tv_device = {
...@@ -279,6 +279,8 @@ static struct gpio_led gpio_leds[]; ...@@ -279,6 +279,8 @@ static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev, static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio) unsigned gpio, unsigned ngpio)
{ {
int r;
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
mmc[0].gpio_wp = -EINVAL; mmc[0].gpio_wp = -EINVAL;
} else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
...@@ -299,17 +301,63 @@ static int beagle_twl_gpio_setup(struct device *dev, ...@@ -299,17 +301,63 @@ static int beagle_twl_gpio_setup(struct device *dev,
/* REVISIT: need ehci-omap hooks for external VBUS /* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect * power switch and overcurrent detect
*/ */
if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) {
r = gpio_request(gpio + 1, "EHCI_nOC");
if (!r) {
r = gpio_direction_input(gpio + 1);
if (r)
gpio_free(gpio + 1);
}
if (r)
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
gpio_request(gpio + 1, "EHCI_nOC"); /*
gpio_direction_input(gpio + 1); * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
* high / others active low)
/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ */
gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
else
gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
/* DVI reset GPIO is different between beagle revisions */
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
beagle_dvi_device.reset_gpio = 129;
else
beagle_dvi_device.reset_gpio = 170;
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
/*
* gpio + 1 on Xm controls the TFP410's enable line (active low)
* gpio + 2 control varies depending on the board rev as follows:
* P7/P8 revisions(prototype): Camera EN
* A2+ revisions (production): LDO (supplies DVI, serial, led blocks)
*/
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
r = gpio_request(gpio + 1, "nDVI_PWR_EN");
if (!r) {
r = gpio_direction_output(gpio + 1, 0);
if (r)
gpio_free(gpio + 1);
}
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
r = gpio_request(gpio + 2, "DVI_LDO_EN");
if (!r) {
r = gpio_direction_output(gpio + 2, 1);
if (r)
gpio_free(gpio + 2);
}
if (r)
pr_err("%s: unable to configure DVI_LDO_EN\n",
__func__);
}
return 0; return 0;
} }
......
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/leds.h> #include <linux/leds.h>
#include <linux/gpio.h> #include <linux/gpio.h>
...@@ -95,7 +96,16 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { ...@@ -95,7 +96,16 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
static void __init omap4_ehci_init(void) static void __init omap4_ehci_init(void)
{ {
int ret; int ret;
struct clk *phy_ref_clk;
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
phy_ref_clk = clk_get(NULL, "auxclk3_ck");
if (IS_ERR(phy_ref_clk)) {
pr_err("Cannot request auxclk3\n");
goto error1;
}
clk_set_rate(phy_ref_clk, 19200000);
clk_enable(phy_ref_clk);
/* disable the power to the usb hub prior to init */ /* disable the power to the usb hub prior to init */
ret = gpio_request(GPIO_HUB_POWER, "hub_power"); ret = gpio_request(GPIO_HUB_POWER, "hub_power");
......
...@@ -192,7 +192,7 @@ static struct platform_device omap_vwlan_device = { ...@@ -192,7 +192,7 @@ static struct platform_device omap_vwlan_device = {
}, },
}; };
struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO), .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
/* ZOOM ref clock is 26 MHz */ /* ZOOM ref clock is 26 MHz */
.board_ref_clock = 1, .board_ref_clock = 1,
...@@ -286,7 +286,7 @@ static int zoom_twl_gpio_setup(struct device *dev, ...@@ -286,7 +286,7 @@ static int zoom_twl_gpio_setup(struct device *dev,
} }
/* EXTMUTE callback function */ /* EXTMUTE callback function */
void zoom2_set_hs_extmute(int mute) static void zoom2_set_hs_extmute(int mute)
{ {
gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
} }
......
...@@ -3286,7 +3286,7 @@ static struct omap_clk omap3xxx_clks[] = { ...@@ -3286,7 +3286,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("ehci-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2 | CK_AM35XX), CLK("ehci-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX),
CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX),
CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX),
......
...@@ -103,9 +103,7 @@ struct clockdomain { ...@@ -103,9 +103,7 @@ struct clockdomain {
const char *name; const char *name;
struct powerdomain *ptr; struct powerdomain *ptr;
} pwrdm; } pwrdm;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
const u16 clktrctrl_mask; const u16 clktrctrl_mask;
#endif
const u8 flags; const u8 flags;
const u8 dep_bit; const u8 dep_bit;
const u8 prcm_partition; const u8 prcm_partition;
......
...@@ -978,7 +978,7 @@ static int __init omap2_init_devices(void) ...@@ -978,7 +978,7 @@ static int __init omap2_init_devices(void)
arch_initcall(omap2_init_devices); arch_initcall(omap2_init_devices);
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
struct omap_device_pm_latency omap_wdt_latency[] = { static struct omap_device_pm_latency omap_wdt_latency[] = {
[0] = { [0] = {
.deactivate_func = omap_device_idle_hwmods, .deactivate_func = omap_device_idle_hwmods,
.activate_func = omap_device_enable_hwmods, .activate_func = omap_device_enable_hwmods,
......
...@@ -893,7 +893,7 @@ static struct omap_mux * __init omap_mux_list_add( ...@@ -893,7 +893,7 @@ static struct omap_mux * __init omap_mux_list_add(
return NULL; return NULL;
m = &entry->mux; m = &entry->mux;
memcpy(m, src, sizeof(struct omap_mux_entry)); entry->mux = *src;
#ifdef CONFIG_OMAP_MUX #ifdef CONFIG_OMAP_MUX
if (omap_mux_copy_names(src, m)) { if (omap_mux_copy_names(src, m)) {
......
...@@ -703,7 +703,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = { ...@@ -703,7 +703,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
* Signals different on CBC package compared to the superset * Signals different on CBC package compared to the superset
*/ */
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC) #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC)
struct omap_mux __initdata omap3_cbc_subset[] = { static struct omap_mux __initdata omap3_cbc_subset[] = {
{ .reg_offset = OMAP_MUX_TERMINATOR }, { .reg_offset = OMAP_MUX_TERMINATOR },
}; };
#else #else
...@@ -721,7 +721,7 @@ struct omap_mux __initdata omap3_cbc_subset[] = { ...@@ -721,7 +721,7 @@ struct omap_mux __initdata omap3_cbc_subset[] = {
*/ */
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
&& defined(CONFIG_OMAP_PACKAGE_CBC) && defined(CONFIG_OMAP_PACKAGE_CBC)
struct omap_ball __initdata omap3_cbc_ball[] = { static struct omap_ball __initdata omap3_cbc_ball[] = {
_OMAP3_BALLENTRY(CAM_D0, "ae16", NULL), _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL),
_OMAP3_BALLENTRY(CAM_D1, "ae15", NULL), _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL),
_OMAP3_BALLENTRY(CAM_D10, "d25", NULL), _OMAP3_BALLENTRY(CAM_D10, "d25", NULL),
......
...@@ -544,7 +544,7 @@ static struct omap_mux __initdata omap4_core_muxmodes[] = { ...@@ -544,7 +544,7 @@ static struct omap_mux __initdata omap4_core_muxmodes[] = {
*/ */
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
&& defined(CONFIG_OMAP_PACKAGE_CBL) && defined(CONFIG_OMAP_PACKAGE_CBL)
struct omap_ball __initdata omap4_core_cbl_ball[] = { static struct omap_ball __initdata omap4_core_cbl_ball[] = {
_OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL), _OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL),
_OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL), _OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL),
_OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL), _OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL),
...@@ -1262,7 +1262,7 @@ static struct omap_mux __initdata omap4_es2_core_muxmodes[] = { ...@@ -1262,7 +1262,7 @@ static struct omap_mux __initdata omap4_es2_core_muxmodes[] = {
*/ */
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
&& defined(CONFIG_OMAP_PACKAGE_CBS) && defined(CONFIG_OMAP_PACKAGE_CBS)
struct omap_ball __initdata omap4_core_cbs_ball[] = { static struct omap_ball __initdata omap4_core_cbs_ball[] = {
_OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL), _OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL),
_OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL), _OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL),
_OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL), _OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL),
...@@ -1546,7 +1546,7 @@ static struct omap_mux __initdata omap4_wkup_muxmodes[] = { ...@@ -1546,7 +1546,7 @@ static struct omap_mux __initdata omap4_wkup_muxmodes[] = {
*/ */
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
&& defined(CONFIG_OMAP_PACKAGE_CBL) && defined(CONFIG_OMAP_PACKAGE_CBL)
struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = { static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = {
_OMAP4_BALLENTRY(SIM_IO, "h4", NULL), _OMAP4_BALLENTRY(SIM_IO, "h4", NULL),
_OMAP4_BALLENTRY(SIM_CLK, "j2", NULL), _OMAP4_BALLENTRY(SIM_CLK, "j2", NULL),
_OMAP4_BALLENTRY(SIM_RESET, "g2", NULL), _OMAP4_BALLENTRY(SIM_RESET, "g2", NULL),
......
...@@ -20,6 +20,8 @@ ...@@ -20,6 +20,8 @@
#include <plat/voltage.h> #include <plat/voltage.h>
#include "pm.h"
#define OMAP3_SRI2C_SLAVE_ADDR 0x12 #define OMAP3_SRI2C_SLAVE_ADDR 0x12
#define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00 #define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00
#define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01 #define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01
...@@ -60,17 +62,17 @@ static u8 smps_offset; ...@@ -60,17 +62,17 @@ static u8 smps_offset;
#define REG_SMPS_OFFSET 0xE0 #define REG_SMPS_OFFSET 0xE0
unsigned long twl4030_vsel_to_uv(const u8 vsel) static unsigned long twl4030_vsel_to_uv(const u8 vsel)
{ {
return (((vsel * 125) + 6000)) * 100; return (((vsel * 125) + 6000)) * 100;
} }
u8 twl4030_uv_to_vsel(unsigned long uv) static u8 twl4030_uv_to_vsel(unsigned long uv)
{ {
return DIV_ROUND_UP(uv - 600000, 12500); return DIV_ROUND_UP(uv - 600000, 12500);
} }
unsigned long twl6030_vsel_to_uv(const u8 vsel) static unsigned long twl6030_vsel_to_uv(const u8 vsel)
{ {
/* /*
* In TWL6030 depending on the value of SMPS_OFFSET * In TWL6030 depending on the value of SMPS_OFFSET
...@@ -102,7 +104,7 @@ unsigned long twl6030_vsel_to_uv(const u8 vsel) ...@@ -102,7 +104,7 @@ unsigned long twl6030_vsel_to_uv(const u8 vsel)
return ((((vsel - 1) * 125) + 6000)) * 100; return ((((vsel - 1) * 125) + 6000)) * 100;
} }
u8 twl6030_uv_to_vsel(unsigned long uv) static u8 twl6030_uv_to_vsel(unsigned long uv)
{ {
/* /*
* In TWL6030 depending on the value of SMPS_OFFSET * In TWL6030 depending on the value of SMPS_OFFSET
......
...@@ -20,7 +20,7 @@ ...@@ -20,7 +20,7 @@
#include <plat/omap-pm.h> #include <plat/omap-pm.h>
#ifdef CONFIG_PM_RUNTIME #ifdef CONFIG_PM_RUNTIME
int omap_pm_runtime_suspend(struct device *dev) static int omap_pm_runtime_suspend(struct device *dev)
{ {
struct platform_device *pdev = to_platform_device(dev); struct platform_device *pdev = to_platform_device(dev);
int r, ret = 0; int r, ret = 0;
...@@ -37,7 +37,7 @@ int omap_pm_runtime_suspend(struct device *dev) ...@@ -37,7 +37,7 @@ int omap_pm_runtime_suspend(struct device *dev)
return ret; return ret;
}; };
int omap_pm_runtime_resume(struct device *dev) static int omap_pm_runtime_resume(struct device *dev)
{ {
struct platform_device *pdev = to_platform_device(dev); struct platform_device *pdev = to_platform_device(dev);
int r; int r;
......
...@@ -228,7 +228,67 @@ ...@@ -228,7 +228,67 @@
#ifndef __ASSEMBLER__ #ifndef __ASSEMBLER__
/*
* Stub omap2xxx/omap3xxx functions so that common files
* continue to build when custom builds are used
*/
#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP3))
static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
}
static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
{
WARN(1, "prm: omap2xxx/omap3xxx specific function and "
"not suppose to be used on omap4\n");
return 0;
}
#else
/* Power/reset management domain register get/set */ /* Power/reset management domain register get/set */
extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx); extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx); extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
...@@ -242,6 +302,7 @@ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); ...@@ -242,6 +302,7 @@ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
#endif /* CONFIG_ARCH_OMAP4 */
#endif #endif
/* /*
......
...@@ -27,6 +27,7 @@ ...@@ -27,6 +27,7 @@
#include <plat/voltage.h> #include <plat/voltage.h>
#include "control.h" #include "control.h"
#include "pm.h"
static bool sr_enable_on_init; static bool sr_enable_on_init;
......
...@@ -13,6 +13,8 @@ ...@@ -13,6 +13,8 @@
#include <plat/omap_hwmod.h> #include <plat/omap_hwmod.h>
#include "wd_timer.h"
/* /*
* In order to avoid any assumptions from bootloader regarding WDT * In order to avoid any assumptions from bootloader regarding WDT
* settings, WDT module is reset during init. This enables the watchdog * settings, WDT module is reset during init. This enables the watchdog
......
...@@ -644,7 +644,7 @@ config ARM_THUMBEE ...@@ -644,7 +644,7 @@ config ARM_THUMBEE
config SWP_EMULATE config SWP_EMULATE
bool "Emulate SWP/SWPB instructions" bool "Emulate SWP/SWPB instructions"
depends on CPU_V7 depends on CPU_V7 && !CPU_V6
select HAVE_PROC_CPU if PROC_FS select HAVE_PROC_CPU if PROC_FS
default y if SMP default y if SMP
help help
......
...@@ -718,7 +718,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) ...@@ -718,7 +718,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_GPIO_24XX: case METHOD_GPIO_24XX:
case METHOD_GPIO_44XX: case METHOD_GPIO_44XX:
set_24xx_gpio_triggering(bank, gpio, trigger); set_24xx_gpio_triggering(bank, gpio, trigger);
break; return 0;
#endif #endif
default: default:
goto bad; goto bad;
...@@ -756,8 +756,10 @@ static int gpio_irq_type(unsigned irq, unsigned type) ...@@ -756,8 +756,10 @@ static int gpio_irq_type(unsigned irq, unsigned type)
spin_lock_irqsave(&bank->lock, flags); spin_lock_irqsave(&bank->lock, flags);
retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
if (retval == 0) { if (retval == 0) {
irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; struct irq_desc *d = irq_to_desc(irq);
irq_desc[irq].status |= type;
d->status &= ~IRQ_TYPE_SENSE_MASK;
d->status |= type;
} }
spin_unlock_irqrestore(&bank->lock, flags); spin_unlock_irqrestore(&bank->lock, flags);
...@@ -1671,7 +1673,9 @@ static void __init omap_gpio_chip_init(struct gpio_bank *bank) ...@@ -1671,7 +1673,9 @@ static void __init omap_gpio_chip_init(struct gpio_bank *bank)
for (j = bank->virtual_irq_start; for (j = bank->virtual_irq_start;
j < bank->virtual_irq_start + bank_width; j++) { j < bank->virtual_irq_start + bank_width; j++) {
lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); struct irq_desc *d = irq_to_desc(j);
lockdep_set_class(&d->lock, &gpio_lock_class);
set_irq_chip_data(j, bank); set_irq_chip_data(j, bank);
if (bank_is_mpuio(bank)) if (bank_is_mpuio(bank))
set_irq_chip(j, &mpuio_irq_chip); set_irq_chip(j, &mpuio_irq_chip);
......
...@@ -14,6 +14,8 @@ ...@@ -14,6 +14,8 @@
#ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H #ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
#define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H #define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
#include <linux/err.h>
#define VOLTSCALE_VPFORCEUPDATE 1 #define VOLTSCALE_VPFORCEUPDATE 1
#define VOLTSCALE_VCBYPASS 2 #define VOLTSCALE_VCBYPASS 2
...@@ -65,9 +67,6 @@ struct voltagedomain { ...@@ -65,9 +67,6 @@ struct voltagedomain {
char *name; char *name;
}; };
/* API to get the voltagedomain pointer */
struct voltagedomain *omap_voltage_domain_lookup(char *name);
/** /**
* struct omap_volt_data - Omap voltage specific data. * struct omap_volt_data - Omap voltage specific data.
* @voltage_nominal: The possible voltage value in uV * @voltage_nominal: The possible voltage value in uV
...@@ -131,16 +130,26 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm, ...@@ -131,16 +130,26 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm,
struct omap_volt_pmic_info *pmic_info); struct omap_volt_pmic_info *pmic_info);
void omap_change_voltscale_method(struct voltagedomain *voltdm, void omap_change_voltscale_method(struct voltagedomain *voltdm,
int voltscale_method); int voltscale_method);
/* API to get the voltagedomain pointer */
struct voltagedomain *omap_voltage_domain_lookup(char *name);
int omap_voltage_late_init(void); int omap_voltage_late_init(void);
#else #else
static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm, static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
struct omap_volt_pmic_info *pmic_info) {} struct omap_volt_pmic_info *pmic_info)
{
return -EINVAL;
}
static inline void omap_change_voltscale_method(struct voltagedomain *voltdm, static inline void omap_change_voltscale_method(struct voltagedomain *voltdm,
int voltscale_method) {} int voltscale_method) {}
static inline int omap_voltage_late_init(void) static inline int omap_voltage_late_init(void)
{ {
return -EINVAL; return -EINVAL;
} }
static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
{
return ERR_PTR(-EINVAL);
}
#endif #endif
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment