dt-bindings: clock: drop useless consumer example

Consumer examples in the bindings of resource providers are trivial,
useless and duplication of code.  Remove the example code for consumer
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220316130858.93455-2-krzysztof.kozlowski@canonical.comAcked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml

@@ -61,16 +61,4 @@ examples:
         #clock-cells = <1>;
     };
 
-  # Example UART controller node that consumes clock generated by the clock controller:
-  - |
-    uart0: serial@58018000 {
-         compatible = "snps,dw-apb-uart";
-         reg = <0x58018000 0x2000>;
-         clocks = <&clk 45>, <&clk 46>;
-         clock-names = "baudclk", "apb_pclk";
-         interrupts = <0 9 4>;
-         reg-shift = <2>;
-         reg-io-width = <4>;
-    };
-
 ...

Documentation/devicetree/bindings/clock/idt,versaclock5.yaml

@@ -191,11 +191,4 @@ examples:
         };
     };
 
-    /* Consumer referencing the 5P49V5923 pin OUT1 */
-    consumer {
-        /* ... */
-        clocks = <&vc5 1>;
-        /* ... */
-    };
-
 ...

Documentation/devicetree/bindings/clock/imx1-clock.yaml

@@ -40,12 +40,3 @@ examples:
         compatible = "fsl,imx1-ccm";
         reg = <0x0021b000 0x1000>;
     };
-
-    pwm@208000 {
-        #pwm-cells = <2>;
-        compatible = "fsl,imx1-pwm";
-        reg = <0x00208000 0x1000>;
-        interrupts = <34>;
-        clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };

Documentation/devicetree/bindings/clock/imx21-clock.yaml

@@ -40,12 +40,3 @@ examples:
         reg = <0x10027000 0x800>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
-                 <&clks IMX21_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };

Documentation/devicetree/bindings/clock/imx23-clock.yaml

@@ -83,12 +83,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006c000 {
-        compatible = "fsl,imx23-auart";
-        reg = <0x8006c000 0x2000>;
-        interrupts = <24>;
-        clocks = <&clks 32>;
-        dmas = <&dma_apbx 6>, <&dma_apbx 7>;
-        dma-names = "rx", "tx";
-    };

Documentation/devicetree/bindings/clock/imx25-clock.yaml

@@ -176,11 +176,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 79>, <&clks 50>;
-        clock-names = "ipg", "per";
-    };

Documentation/devicetree/bindings/clock/imx27-clock.yaml

@@ -44,12 +44,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-                 <&clks IMX27_CLK_PER1_GATE>;
-        clock-names = "ipg", "per";
-    };

Documentation/devicetree/bindings/clock/imx28-clock.yaml

@@ -106,12 +106,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006a000 {
-        compatible = "fsl,imx28-auart";
-        reg = <0x8006a000 0x2000>;
-        interrupts = <112>;
-        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-        dma-names = "rx", "tx";
-        clocks = <&clks 45>;
-    };

Documentation/devicetree/bindings/clock/imx31-clock.yaml

@@ -110,11 +110,3 @@ examples:
         interrupts = <31>, <53>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 10>, <&clks 30>;
-        clock-names = "ipg", "per";
-    };

Documentation/devicetree/bindings/clock/imx35-clock.yaml

@@ -129,11 +129,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    mmc@53fb4000 {
-        compatible = "fsl,imx35-esdhc";
-        reg = <0x53fb4000 0x4000>;
-        interrupts = <7>;
-        clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-        clock-names = "ipg", "ahb", "per";
-    };

Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml

@@ -108,14 +108,3 @@ examples:
                        "upll", "sosc_bus_clk", "firc_bus_clk",
                        "rosc", "spll_bus_clk";
     };
-
-    mmc@40380000 {
-        compatible = "fsl,imx7ulp-usdhc";
-        reg = <0x40380000 0x10000>;
-        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-                 <&pcc2 IMX7ULP_CLK_USDHC1>;
-        clock-names ="ipg", "ahb", "per";
-        bus-width = <4>;
-    };

Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml

@@ -86,14 +86,3 @@ examples:
                       "firc", "upll";
         #clock-cells = <1>;
     };
-
-    mmc@40380000 {
-        compatible = "fsl,imx7ulp-usdhc";
-        reg = <0x40380000 0x10000>;
-        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-                 <&pcc2 IMX7ULP_CLK_USDHC1>;
-        clock-names ="ipg", "ahb", "per";
-        bus-width = <4>;
-    };

Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml

@@ -101,14 +101,3 @@ examples:
                              "sdhc0_lpcg_ahb_clk";
         power-domains = <&pd IMX_SC_R_SDHC_0>;
     };
-
-    mmc@5b010000 {
-        compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-        interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-        reg = <0x5b010000 0x10000>;
-        clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-        clock-names = "ipg", "ahb", "per";
-        power-domains = <&pd IMX_SC_R_SDHC_0>;
-    };

Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml

@@ -57,11 +57,3 @@ examples:
         clock-names = "osc";
         #clock-cells = <1>;
     };
-
-    lpuart1: serial@40184000 {
-        compatible = "fsl,imxrt1050-lpuart";
-        reg = <0x40184000 0x4000>;
-        interrupts = <20>;
-        clocks = <&clks IMXRT1050_CLK_LPUART1>;
-        clock-names = "ipg";
-    };

Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml

@@ -106,10 +106,3 @@ examples:
         #clock-cells = <1>;
         #reset-cells = <1>;
     };
-
-    usb-controller@c5004000 {
-        compatible = "nvidia,tegra20-ehci";
-        reg = <0xc5004000 0x4000>;
-        clocks = <&car TEGRA124_CLK_USB2>;
-        resets = <&car TEGRA124_CLK_USB2>;
-    };

Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml

@@ -97,10 +97,3 @@ examples:
             power-domains = <&domain>;
         };
     };
-
-    usb-controller@c5004000 {
-        compatible = "nvidia,tegra20-ehci";
-        reg = <0xc5004000 0x4000>;
-        clocks = <&car TEGRA20_CLK_USB2>;
-        resets = <&car TEGRA20_CLK_USB2>;
-    };