drm/i915: Make downclock deduction common for all panels

If one mode of a internal panel has more than one refresh rate, then a reduced
clock is found for the LFP (LVDS/eDP). This enables switching between low
and high frequency dynamically. Moving downclock calculation to intel_panel
so that it is common for LVDS and eDP.
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_drv.h

@@ -155,6 +155,7 @@ struct intel_encoder {
 
 struct intel_panel {
 	struct drm_display_mode *fixed_mode;
+	struct drm_display_mode *downclock_mode;
 	int fitting_mode;
 
 	/* backlight */
@@ -823,7 +824,10 @@ void intel_panel_disable_backlight(struct intel_connector *connector);
 void intel_panel_destroy_backlight(struct drm_connector *connector);
 void intel_panel_init_backlight_funcs(struct drm_device *dev);
 enum drm_connector_status intel_panel_detect(struct drm_device *dev);
-
+extern struct drm_display_mode *intel_find_panel_downclock(
+				struct drm_device *dev,
+				struct drm_display_mode *fixed_mode,
+				struct drm_connector *connector);
 
 /* intel_pm.c */
 void intel_init_clock_gating(struct drm_device *dev);

drivers/gpu/drm/i915/intel_lvds.c

@@ -755,57 +755,6 @@ static const struct dmi_system_id intel_no_lvds[] = {
 	{ }	/* terminating entry */
 };
 
-/**
- * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
- * @dev: drm device
- * @connector: LVDS connector
- *
- * Find the reduced downclock for LVDS in EDID.
- */
-static void intel_find_lvds_downclock(struct drm_device *dev,
-				      struct drm_display_mode *fixed_mode,
-				      struct drm_connector *connector)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_display_mode *scan;
-	int temp_downclock;
-
-	temp_downclock = fixed_mode->clock;
-	list_for_each_entry(scan, &connector->probed_modes, head) {
-		/*
-		 * If one mode has the same resolution with the fixed_panel
-		 * mode while they have the different refresh rate, it means
-		 * that the reduced downclock is found for the LVDS. In such
-		 * case we can set the different FPx0/1 to dynamically select
-		 * between low and high frequency.
-		 */
-		if (scan->hdisplay == fixed_mode->hdisplay &&
-		    scan->hsync_start == fixed_mode->hsync_start &&
-		    scan->hsync_end == fixed_mode->hsync_end &&
-		    scan->htotal == fixed_mode->htotal &&
-		    scan->vdisplay == fixed_mode->vdisplay &&
-		    scan->vsync_start == fixed_mode->vsync_start &&
-		    scan->vsync_end == fixed_mode->vsync_end &&
-		    scan->vtotal == fixed_mode->vtotal) {
-			if (scan->clock < temp_downclock) {
-				/*
-				 * The downclock is already found. But we
-				 * expect to find the lower downclock.
-				 */
-				temp_downclock = scan->clock;
-			}
-		}
-	}
-	if (temp_downclock < fixed_mode->clock && i915_lvds_downclock) {
-		/* We found the downclock for LVDS. */
-		dev_priv->lvds_downclock_avail = 1;
-		dev_priv->lvds_downclock = temp_downclock;
-		DRM_DEBUG_KMS("LVDS downclock is found in EDID. "
-			      "Normal clock %dKhz, downclock %dKhz\n",
-			      fixed_mode->clock, temp_downclock);
-	}
-}
-
 /*
  * Enumerate the child dev array parsed from VBT to check whether
  * the LVDS is present.
@@ -1083,8 +1032,22 @@ void intel_lvds_init(struct drm_device *dev)
 
 			fixed_mode = drm_mode_duplicate(dev, scan);
 			if (fixed_mode) {
-				intel_find_lvds_downclock(dev, fixed_mode,
-							  connector);
+				intel_connector->panel.downclock_mode =
+					intel_find_panel_downclock(dev,
+					fixed_mode, connector);
+				if (intel_connector->panel.downclock_mode !=
+					NULL &&	i915_lvds_downclock) {
+					/* We found the downclock for LVDS. */
+					dev_priv->lvds_downclock_avail = true;
+					dev_priv->lvds_downclock =
+						intel_connector->panel.
+						downclock_mode->clock;
+					DRM_DEBUG_KMS("LVDS downclock is found"
+					" in EDID. Normal clock %dKhz, "
+					"downclock %dKhz\n",
+					fixed_mode->clock,
+					dev_priv->lvds_downclock);
+				}
 				goto out;
 			}
 		}

drivers/gpu/drm/i915/intel_panel.c

@@ -1104,6 +1104,59 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
 	intel_backlight_device_unregister(intel_connector);
 }
 
+/**
+ * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
+ * @dev: drm device
+ * @fixed_mode : panel native mode
+ * @connector: LVDS/eDP connector
+ *
+ * Return downclock_avail
+ * Find the reduced downclock for LVDS/eDP in EDID.
+ */
+struct drm_display_mode *
+intel_find_panel_downclock(struct drm_device *dev,
+			struct drm_display_mode *fixed_mode,
+			struct drm_connector *connector)
+{
+	struct drm_display_mode *scan, *tmp_mode;
+	int temp_downclock;
+
+	temp_downclock = fixed_mode->clock;
+	tmp_mode = NULL;
+
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		/*
+		 * If one mode has the same resolution with the fixed_panel
+		 * mode while they have the different refresh rate, it means
+		 * that the reduced downclock is found. In such
+		 * case we can set the different FPx0/1 to dynamically select
+		 * between low and high frequency.
+		 */
+		if (scan->hdisplay == fixed_mode->hdisplay &&
+		    scan->hsync_start == fixed_mode->hsync_start &&
+		    scan->hsync_end == fixed_mode->hsync_end &&
+		    scan->htotal == fixed_mode->htotal &&
+		    scan->vdisplay == fixed_mode->vdisplay &&
+		    scan->vsync_start == fixed_mode->vsync_start &&
+		    scan->vsync_end == fixed_mode->vsync_end &&
+		    scan->vtotal == fixed_mode->vtotal) {
+			if (scan->clock < temp_downclock) {
+				/*
+				 * The downclock is already found. But we
+				 * expect to find the lower downclock.
+				 */
+				temp_downclock = scan->clock;
+				tmp_mode = scan;
+			}
+		}
+	}
+
+	if (temp_downclock < fixed_mode->clock)
+		return drm_mode_duplicate(dev, tmp_mode);
+	else
+		return NULL;
+}
+
 /* Set up chip specific backlight functions */
 void intel_panel_init_backlight_funcs(struct drm_device *dev)
 {
@@ -1157,4 +1210,8 @@ void intel_panel_fini(struct intel_panel *panel)
 
 	if (panel->fixed_mode)
 		drm_mode_destroy(intel_connector->base.dev, panel->fixed_mode);
+
+	if (panel->downclock_mode)
+		drm_mode_destroy(intel_connector->base.dev,
+				panel->downclock_mode);
 }