Commit ed193ece authored by Jon Paul Maloy's avatar Jon Paul Maloy Committed by David S. Miller

tipc: simplify link mtu negotiation

When a link is being established, the two endpoints advertise their
respective interface MTU in the transmitted RESET and ACTIVATE messages.
If there is any difference, the lower of the two MTUs will be selected
for use by both endpoints.

However, as a remnant of earlier attempts to introduce TIPC level
routing. there also exists an MTU discovery mechanism. If an intermediate
node has a lower MTU than the two endpoints, they will discover this
through a bisectional approach, and finally adopt this MTU for common use.

Since there is no TIPC level routing, and probably never will be,
this mechanism doesn't make any sense, and only serves to make the
link level protocol unecessarily complex.

In this commit, we eliminate the MTU discovery algorithm,and fall back
to the simple MTU advertising approach. This change is fully backwards
compatible.
Reviewed-by: default avatarYing Xue <ying.xue@windriver.com>
Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent dff29b1a
......@@ -413,7 +413,7 @@ static void bclink_accept_pkt(struct tipc_node *node, u32 seqno)
*/
if (((seqno - tn->own_addr) % TIPC_MIN_LINK_WIN) == 0) {
tipc_link_proto_xmit(node->active_links[node->addr & 1],
STATE_MSG, 0, 0, 0, 0, 0);
STATE_MSG, 0, 0, 0, 0);
tn->bcl->stats.sent_acks++;
}
}
......@@ -899,7 +899,7 @@ int tipc_bclink_init(struct net *net)
skb_queue_head_init(&bclink->inputq);
bcl->owner = &bclink->node;
bcl->owner->net = net;
bcl->max_pkt = MAX_PKT_DEFAULT_MCAST;
bcl->mtu = MAX_PKT_DEFAULT_MCAST;
tipc_link_set_queue_limits(bcl, BCLINK_WIN_DEFAULT);
bcl->bearer_id = MAX_BEARERS;
rcu_assign_pointer(tn->bearer_list[MAX_BEARERS], &bcbearer->bearer);
......
This diff is collapsed.
......@@ -123,9 +123,8 @@ struct tipc_stats {
* @backlog_limit: backlog queue congestion thresholds (indexed by importance)
* @exp_msg_count: # of tunnelled messages expected during link changeover
* @reset_checkpoint: seq # of last acknowledged message at time of link reset
* @max_pkt: current maximum packet size for this link
* @max_pkt_target: desired maximum packet size for this link
* @max_pkt_probes: # of probes based on current (max_pkt, max_pkt_target)
* @mtu: current maximum packet size for this link
* @advertised_mtu: advertised own mtu when link is being established
* @transmitq: queue for sent, non-acked messages
* @backlogq: queue for messages waiting to be sent
* @next_out_no: next sequence number to use for outbound messages
......@@ -176,9 +175,8 @@ struct tipc_link {
struct sk_buff *failover_skb;
/* Max packet negotiation */
u32 max_pkt;
u32 max_pkt_target;
u32 max_pkt_probes;
u16 mtu;
u16 advertised_mtu;
/* Sending */
struct sk_buff_head transmq;
......@@ -233,7 +231,7 @@ int tipc_link_xmit(struct net *net, struct sk_buff_head *list, u32 dest,
int __tipc_link_xmit(struct net *net, struct tipc_link *link,
struct sk_buff_head *list);
void tipc_link_proto_xmit(struct tipc_link *l_ptr, u32 msg_typ, int prob,
u32 gap, u32 tolerance, u32 priority, u32 acked_mtu);
u32 gap, u32 tolerance, u32 priority);
void tipc_link_push_packets(struct tipc_link *l_ptr);
u32 tipc_link_defer_pkt(struct sk_buff_head *list, struct sk_buff *buf);
void tipc_link_set_queue_limits(struct tipc_link *l_ptr, u32 window);
......
......@@ -254,8 +254,8 @@ void tipc_node_link_up(struct tipc_node *n_ptr, struct tipc_link *l_ptr)
active[0] = active[1] = l_ptr;
exit:
/* Leave room for changeover header when returning 'mtu' to users: */
n_ptr->act_mtus[0] = active[0]->max_pkt - INT_H_SIZE;
n_ptr->act_mtus[1] = active[1]->max_pkt - INT_H_SIZE;
n_ptr->act_mtus[0] = active[0]->mtu - INT_H_SIZE;
n_ptr->act_mtus[1] = active[1]->mtu - INT_H_SIZE;
}
/**
......@@ -319,11 +319,10 @@ void tipc_node_link_down(struct tipc_node *n_ptr, struct tipc_link *l_ptr)
/* Leave room for changeover header when returning 'mtu' to users: */
if (active[0]) {
n_ptr->act_mtus[0] = active[0]->max_pkt - INT_H_SIZE;
n_ptr->act_mtus[1] = active[1]->max_pkt - INT_H_SIZE;
n_ptr->act_mtus[0] = active[0]->mtu - INT_H_SIZE;
n_ptr->act_mtus[1] = active[1]->mtu - INT_H_SIZE;
return;
}
/* Loopback link went down? No fragmentation needed from now on. */
if (n_ptr->addr == tn->own_addr) {
n_ptr->act_mtus[0] = MAX_MSG_SIZE;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment