Merge tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
 "These update thermal drivers for ARM platforms by adding new hardware
  support (r8a779h0, H616 THS), addressing issues (Mediatek LVTS,
  Mediatek MT7896, thermal-of) and cleaning up code.

  Specifics:

   - Fix memory leak in the error path at probe time in the Mediatek
     LVTS driver (Christophe Jaillet)

   - Fix control buffer enablement regression on Meditek MT7896 (Frank
     Wunderlich)

   - Drop spaces before TABs in different places: thermal-of, ST drivers
     and Makefile (Geert Uytterhoeven)

   - Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
     among several SoC versions (Fabio Estevam)

   - Add support for the H616 THS controller on Sun8i platforms (Martin
     Botka)

   - Don't fail probe due to zone registration failure because there is
     no trip points defined in the DT (Mark Brown)

   - Support variable TMU array size for new platforms (Peng Fan)

   - Adjust the DT binding for thermal-of and make the polling time not
     required and assume it is zero when not found in the DT (Konrad
     Dybcio)

   - Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
     Uytterhoeven)"

* tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/drivers/rcar_gen3: Add support for R-Car V4M
  dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
  thermal/of: Assume polling-delay(-passive) 0 when absent
  dt-bindings: thermal-zones: Don't require polling-delay(-passive)
  thermal/drivers/qoriq: Fix getting tmu range
  thermal/drivers/sun8i: Don't fail probe due to zone registration failure
  thermal/drivers/sun8i: Add support for H616 THS controller
  thermal/drivers/sun8i: Add SRAM register access code
  thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
  thermal/drivers/sun8i: Explain unknown H6 register value
  dt-bindings: thermal: sun8i: Add H616 THS controller
  soc: sunxi: sram: export register 0 for THS on H616
  dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
  thermal: Drop spaces before TABs
  thermal/drivers/mediatek: Fix control buffer enablement on MT7896
  thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path

Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml

@@ -21,6 +21,7 @@ properties:
       - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
       - allwinner,sun50i-h6-ths
+      - allwinner,sun50i-h616-ths
 
   clocks:
     minItems: 1
@@ -50,6 +51,10 @@ properties:
   nvmem-cell-names:
     const: calibration
 
+  allwinner,sram:
+    maxItems: 1
+    description: phandle to device controlling temperate offset SYS_CFG register
+
   # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     enum:
@@ -65,6 +70,7 @@ allOf:
               - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h6-ths
+              - allwinner,sun50i-h616-ths
 
     then:
       properties:
@@ -82,6 +88,17 @@ allOf:
         clock-names:
           minItems: 2
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: allwinner,sun50i-h616-ths
+
+    then:
+      properties:
+        allwinner,sram: false
+
   - if:
       properties:
         compatible:
@@ -101,17 +118,12 @@ allOf:
           const: 1
 
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - allwinner,sun8i-h3-ths
-              - allwinner,sun8i-r40-ths
-              - allwinner,sun20i-d1-ths
-              - allwinner,sun50i-a64-ths
-              - allwinner,sun50i-a100-ths
-              - allwinner,sun50i-h5-ths
-              - allwinner,sun50i-h6-ths
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - allwinner,sun8i-a83t-ths
 
     then:
       required:

Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml

@@ -33,7 +33,8 @@ properties:
     description: |
       The values to be programmed into TTRnCR, as specified by the SoC
       reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
-    maxItems: 4
+    minItems: 2
+    maxItems: 7
 
   fsl,tmu-calibration:
     $ref: /schemas/types.yaml#/definitions/uint32-matrix

Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml

@@ -29,6 +29,7 @@ properties:
       - renesas,r8a779a0-thermal # R-Car V3U
       - renesas,r8a779f0-thermal # R-Car S4-8
       - renesas,r8a779g0-thermal # R-Car V4H
+      - renesas,r8a779h0-thermal # R-Car V4M
 
   reg: true
 
@@ -90,6 +91,7 @@ else:
             enum:
               - renesas,r8a779f0-thermal
               - renesas,r8a779g0-thermal
+              - renesas,r8a779h0-thermal
   then:
     required:
       - interrupts

Documentation/devicetree/bindings/thermal/thermal-zones.yaml

@@ -228,8 +228,6 @@ patternProperties:
             additionalProperties: false
 
     required:
-      - polling-delay
-      - polling-delay-passive
       - thermal-sensors
       - trips
 

drivers/soc/sunxi/sunxi_sram.c

@@ -287,6 +287,7 @@ EXPORT_SYMBOL(sunxi_sram_release);
 struct sunxi_sramc_variant {
 	int num_emac_clocks;
 	bool has_ldo_ctrl;
+	bool has_ths_offset;
 };
 
 static const struct sunxi_sramc_variant sun4i_a10_sramc_variant = {
@@ -308,8 +309,10 @@ static const struct sunxi_sramc_variant sun50i_a64_sramc_variant = {
 
 static const struct sunxi_sramc_variant sun50i_h616_sramc_variant = {
 	.num_emac_clocks = 2,
+	.has_ths_offset = true,
 };
 
+#define SUNXI_SRAM_THS_OFFSET_REG	0x0
 #define SUNXI_SRAM_EMAC_CLOCK_REG	0x30
 #define SUNXI_SYS_LDO_CTRL_REG		0x150
 
@@ -318,6 +321,8 @@ static bool sunxi_sram_regmap_accessible_reg(struct device *dev,
 {
 	const struct sunxi_sramc_variant *variant = dev_get_drvdata(dev);
 
+	if (reg == SUNXI_SRAM_THS_OFFSET_REG && variant->has_ths_offset)
+		return true;
 	if (reg >= SUNXI_SRAM_EMAC_CLOCK_REG &&
 	    reg <  SUNXI_SRAM_EMAC_CLOCK_REG + variant->num_emac_clocks * 4)
 		return true;
@@ -327,6 +332,20 @@ static bool sunxi_sram_regmap_accessible_reg(struct device *dev,
 	return false;
 }
 
+static void sunxi_sram_lock(void *_lock)
+{
+	spinlock_t *lock = _lock;
+
+	spin_lock(lock);
+}
+
+static void sunxi_sram_unlock(void *_lock)
+{
+	spinlock_t *lock = _lock;
+
+	spin_unlock(lock);
+}
+
 static struct regmap_config sunxi_sram_regmap_config = {
 	.reg_bits       = 32,
 	.val_bits       = 32,
@@ -336,6 +355,9 @@ static struct regmap_config sunxi_sram_regmap_config = {
 	/* other devices have no business accessing other registers */
 	.readable_reg	= sunxi_sram_regmap_accessible_reg,
 	.writeable_reg	= sunxi_sram_regmap_accessible_reg,
+	.lock		= sunxi_sram_lock,
+	.unlock		= sunxi_sram_unlock,
+	.lock_arg	= &sram_lock,
 };
 
 static int __init sunxi_sram_probe(struct platform_device *pdev)

drivers/thermal/Makefile

@@ -43,7 +43,7 @@ obj-$(CONFIG_RCAR_GEN3_THERMAL)	+= rcar_gen3_thermal.o
 obj-$(CONFIG_RZG2L_THERMAL)	+= rzg2l_thermal.o
 obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
 obj-y				+= samsung/
-obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
+obj-$(CONFIG_DOVE_THERMAL)	+= dove_thermal.o
 obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
 obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
 obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o

drivers/thermal/mediatek/auxadc_thermal.c

@@ -690,6 +690,9 @@ static const struct mtk_thermal_data mt7986_thermal_data = {
 	.adcpnp = mt7986_adcpnp,
 	.sensor_mux_values = mt7986_mux_values,
 	.version = MTK_THERMAL_V3,
+	.apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
+	.apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3),
+	.apmixed_buffer_ctl_set = BIT(0),
 };
 
 static bool mtk_thermal_temp_is_valid(int temp)

drivers/thermal/mediatek/lvts_thermal.c

@@ -719,8 +719,10 @@ static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td
 
 		lvts_td->calib = devm_krealloc(dev, lvts_td->calib,
 					       lvts_td->calib_len + len, GFP_KERNEL);
-		if (!lvts_td->calib)
+		if (!lvts_td->calib) {
+			kfree(efuse);
 			return -ENOMEM;
+		}
 
 		memcpy(lvts_td->calib + lvts_td->calib_len, efuse, len);
 

drivers/thermal/qoriq_thermal.c

@@ -57,6 +57,9 @@
 #define REGS_TTRnCR(n)	(0xf10 + 4 * (n)) /* Temperature Range n
 					   * Control Register
 					   */
+#define NUM_TTRCR_V1	4
+#define NUM_TTRCR_MAX	16
+
 #define REGS_IPBRR(n)		(0xbf8 + 4 * (n)) /* IP Block Revision
 						   * Register n
 						   */
@@ -71,6 +74,7 @@ struct qoriq_sensor {
 
 struct qoriq_tmu_data {
 	int ver;
+	u32 ttrcr[NUM_TTRCR_MAX];
 	struct regmap *regmap;
 	struct clk *clk;
 	struct qoriq_sensor	sensor[SITES_MAX];
@@ -182,17 +186,17 @@ static int qoriq_tmu_calibration(struct device *dev,
 				 struct qoriq_tmu_data *data)
 {
 	int i, val, len;
-	u32 range[4];
 	const u32 *calibration;
 	struct device_node *np = dev->of_node;
 
 	len = of_property_count_u32_elems(np, "fsl,tmu-range");
-	if (len < 0 || len > 4) {
+	if (len < 0 || (data->ver == TMU_VER1 && len > NUM_TTRCR_V1) ||
+	    (data->ver > TMU_VER1 && len > NUM_TTRCR_MAX)) {
 		dev_err(dev, "invalid range data.\n");
 		return len;
 	}
 
-	val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
+	val = of_property_read_u32_array(np, "fsl,tmu-range", data->ttrcr, len);
 	if (val != 0) {
 		dev_err(dev, "failed to read range data.\n");
 		return val;
@@ -200,7 +204,7 @@ static int qoriq_tmu_calibration(struct device *dev,
 
 	/* Init temperature range registers */
 	for (i = 0; i < len; i++)
-		regmap_write(data->regmap, REGS_TTRnCR(i), range[i]);
+		regmap_write(data->regmap, REGS_TTRnCR(i), data->ttrcr[i]);
 
 	calibration = of_get_property(np, "fsl,tmu-calibration", &len);
 	if (calibration == NULL || len % 8) {

drivers/thermal/rcar_gen3_thermal.c

@@ -428,6 +428,10 @@ static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
 		.compatible = "renesas,r8a779g0-thermal",
 		.data = &rcar_gen4_thermal_info,
 	},
+	{
+		.compatible = "renesas,r8a779h0-thermal",
+		.data = &rcar_gen4_thermal_info,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);

drivers/thermal/st/st_thermal.h

@@ -38,10 +38,10 @@ struct st_thermal_sensor;
  *
  * @power_ctrl:		Function for powering on/off a sensor. Clock to the
  *			sensor is also controlled from this function.
- * @alloc_regfields: 	Allocate regmap register fields, specific to a sensor.
- * @do_memmap_regmap: 	Memory map the thermal register space and init regmap
+ * @alloc_regfields:	Allocate regmap register fields, specific to a sensor.
+ * @do_memmap_regmap:	Memory map the thermal register space and init regmap
  *			instance or find regmap instance.
- * @register_irq: 	Register an interrupt handler for a sensor.
+ * @register_irq:	Register an interrupt handler for a sensor.
  */
 struct st_thermal_sensor_ops {
 	int (*power_ctrl)(struct st_thermal_sensor *, enum st_thermal_power_state);
@@ -56,15 +56,15 @@ struct st_thermal_sensor_ops {
  *
  * @reg_fields:		Pointer to the regfields array for a sensor.
  * @sys_compat:		Pointer to the syscon node compatible string.
- * @ops: 		Pointer to private thermal ops for a sensor.
- * @calibration_val: 	Default calibration value to be written to the DCORRECT
+ * @ops:		Pointer to private thermal ops for a sensor.
+ * @calibration_val:	Default calibration value to be written to the DCORRECT
  *			register field for a sensor.
- * @temp_adjust_val: 	Value to be added/subtracted from the data read from
+ * @temp_adjust_val:	Value to be added/subtracted from the data read from
  *			the sensor. If value needs to be added please provide a
  *			positive value and if it is to be subtracted please
- * 			provide a negative value.
- * @crit_temp: 		The temperature beyond which the SoC should be shutdown
- * 			to prevent damage.
+ *			provide a negative value.
+ * @crit_temp:		The temperature beyond which the SoC should be shutdown
+ *			to prevent damage.
  */
 struct st_thermal_compat_data {
 	char *sys_compat;

drivers/thermal/st/st_thermal_memmap.c

@@ -27,7 +27,7 @@ static const struct reg_field st_mmap_thermal_regfields[MAX_REGFIELDS] = {
 	 * written simultaneously for powering on and off the temperature
 	 * sensor. regmap_update_bits() will be used to update the register.
 	 */
-	[INT_THRESH_HI]	= REG_FIELD(STIH416_MPE_INT_THRESH, 	0,  7),
+	[INT_THRESH_HI]	= REG_FIELD(STIH416_MPE_INT_THRESH,	0,  7),
 	[DCORRECT]	= REG_FIELD(STIH416_MPE_CONF,		5,  9),
 	[OVERFLOW]	= REG_FIELD(STIH416_MPE_STATUS,		9,  9),
 	[DATA]		= REG_FIELD(STIH416_MPE_STATUS,		11, 18),

drivers/thermal/sun8i_thermal.c

@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
@@ -50,7 +51,8 @@
 #define SUN8I_THS_CTRL2_T_ACQ1(x)		((GENMASK(15, 0) & (x)) << 16)
 #define SUN8I_THS_DATA_IRQ_STS(x)		BIT(x + 8)
 
-#define SUN50I_THS_CTRL0_T_ACQ(x)		((GENMASK(15, 0) & (x)) << 16)
+#define SUN50I_THS_CTRL0_T_ACQ(x)		(GENMASK(15, 0) & ((x) - 1))
+#define SUN50I_THS_CTRL0_T_SAMPLE_PER(x)	((GENMASK(15, 0) & ((x) - 1)) << 16)
 #define SUN50I_THS_FILTER_EN			BIT(2)
 #define SUN50I_THS_FILTER_TYPE(x)		(GENMASK(1, 0) & (x))
 #define SUN50I_H6_THS_PC_TEMP_PERIOD(x)		((GENMASK(19, 0) & (x)) << 12)
@@ -65,6 +67,7 @@ struct tsensor {
 struct ths_thermal_chip {
 	bool            has_mod_clk;
 	bool            has_bus_clk_reset;
+	bool		needs_sram;
 	int		sensor_num;
 	int		offset;
 	int		scale;
@@ -82,12 +85,16 @@ struct ths_device {
 	const struct ths_thermal_chip		*chip;
 	struct device				*dev;
 	struct regmap				*regmap;
+	struct regmap_field			*sram_regmap_field;
 	struct reset_control			*reset;
 	struct clk				*bus_clk;
 	struct clk                              *mod_clk;
 	struct tsensor				sensor[MAX_SENSOR_NUM];
 };
 
+/* The H616 needs to have a bit 16 in the SRAM control register cleared. */
+static const struct reg_field sun8i_ths_sram_reg_field = REG_FIELD(0x0, 16, 16);
+
 /* Temp Unit: millidegree Celsius */
 static int sun8i_ths_calc_temp(struct ths_device *tmdev,
 			       int id, int reg)
@@ -188,6 +195,9 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data)
 	int i;
 
 	for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) {
+		/* We allow some zones to not register. */
+		if (IS_ERR(tmdev->sensor[i].tzd))
+			continue;
 		thermal_zone_device_update(tmdev->sensor[i].tzd,
 					   THERMAL_EVENT_UNSPECIFIED);
 	}
@@ -221,16 +231,21 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	struct device *dev = tmdev->dev;
 	int i, ft_temp;
 
-	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+	if (!caldata[0])
 		return -EINVAL;
 
 	/*
 	 * efuse layout:
 	 *
-	 *	0   11  16	 32
-	 *	+-------+-------+-------+
-	 *	|temp|  |sensor0|sensor1|
-	 *	+-------+-------+-------+
+	 * 0      11  16     27   32     43   48    57
+	 * +----------+-----------+-----------+-----------+
+	 * |  temp |  |sensor0|   |sensor1|   |sensor2|   |
+	 * +----------+-----------+-----------+-----------+
+	 *                      ^           ^           ^
+	 *                      |           |           |
+	 *                      |           |           sensor3[11:8]
+	 *                      |           sensor3[7:4]
+	 *                      sensor3[3:0]
 	 *
 	 * The calibration data on the H6 is the ambient temperature and
 	 * sensor values that are filled during the factory test stage.
@@ -243,9 +258,16 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
 
 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
-		int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
-		int cdata, offset;
-		int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
+		int sensor_reg, sensor_temp, cdata, offset;
+
+		if (i == 3)
+			sensor_reg = (caldata[1] >> 12)
+				     | ((caldata[2] >> 12) << 4)
+				     | ((caldata[3] >> 12) << 8);
+		else
+			sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
+
+		sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
 
 		/*
 		 * Calibration data is CALIBRATE_DEFAULT - (calculated
@@ -324,6 +346,34 @@ static void sun8i_ths_reset_control_assert(void *data)
 	reset_control_assert(data);
 }
 
+static struct regmap *sun8i_ths_get_sram_regmap(struct device_node *node)
+{
+	struct device_node *sram_node;
+	struct platform_device *sram_pdev;
+	struct regmap *regmap = NULL;
+
+	sram_node = of_parse_phandle(node, "allwinner,sram", 0);
+	if (!sram_node)
+		return ERR_PTR(-ENODEV);
+
+	sram_pdev = of_find_device_by_node(sram_node);
+	if (!sram_pdev) {
+		/* platform device might not be probed yet */
+		regmap = ERR_PTR(-EPROBE_DEFER);
+		goto out_put_node;
+	}
+
+	/* If no regmap is found then the other device driver is at fault */
+	regmap = dev_get_regmap(&sram_pdev->dev, NULL);
+	if (!regmap)
+		regmap = ERR_PTR(-EINVAL);
+
+	platform_device_put(sram_pdev);
+out_put_node:
+	of_node_put(sram_node);
+	return regmap;
+}
+
 static int sun8i_ths_resource_init(struct ths_device *tmdev)
 {
 	struct device *dev = tmdev->dev;
@@ -368,6 +418,19 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
 	if (ret)
 		return ret;
 
+	if (tmdev->chip->needs_sram) {
+		struct regmap *regmap;
+
+		regmap = sun8i_ths_get_sram_regmap(dev->of_node);
+		if (IS_ERR(regmap))
+			return PTR_ERR(regmap);
+		tmdev->sram_regmap_field = devm_regmap_field_alloc(dev,
+						      regmap,
+						      sun8i_ths_sram_reg_field);
+		if (IS_ERR(tmdev->sram_regmap_field))
+			return PTR_ERR(tmdev->sram_regmap_field);
+	}
+
 	ret = sun8i_ths_calibrate(tmdev);
 	if (ret)
 		return ret;
@@ -410,25 +473,31 @@ static int sun8i_h3_thermal_init(struct ths_device *tmdev)
 	return 0;
 }
 
-/*
- * Without this undocumented value, the returned temperatures would
- * be higher than real ones by about 20C.
- */
-#define SUN50I_H6_CTRL0_UNK 0x0000002f
-
 static int sun50i_h6_thermal_init(struct ths_device *tmdev)
 {
 	int val;
 
+	/* The H616 needs to have a bit in the SRAM control register cleared. */
+	if (tmdev->sram_regmap_field)
+		regmap_field_write(tmdev->sram_regmap_field, 0);
+
 	/*
-	 * T_acq = 20us
-	 * clkin = 24MHz
-	 *
-	 * x = T_acq * clkin - 1
-	 *   = 479
+	 * The manual recommends an overall sample frequency of 50 KHz (20us,
+	 * 480 cycles at 24 MHz), which provides plenty of time for both the
+	 * acquisition time (>24 cycles) and the actual conversion time
+	 * (>14 cycles).
+	 * The lower half of the CTRL register holds the "acquire time", in
+	 * clock cycles, which the manual recommends to be 2us:
+	 * 24MHz * 2us = 48 cycles.
+	 * The high half of THS_CTRL encodes the sample frequency, in clock
+	 * cycles: 24MHz * 20us = 480 cycles.
+	 * This is explained in the H616 manual, but apparently wrongly
+	 * described in the H6 manual, although the BSP code does the same
+	 * for both SoCs.
 	 */
 	regmap_write(tmdev->regmap, SUN50I_THS_CTRL0,
-		     SUN50I_H6_CTRL0_UNK | SUN50I_THS_CTRL0_T_ACQ(479));
+		     SUN50I_THS_CTRL0_T_ACQ(48) |
+		     SUN50I_THS_CTRL0_T_SAMPLE_PER(480));
 	/* average over 4 samples */
 	regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC,
 		     SUN50I_THS_FILTER_EN |
@@ -465,8 +534,17 @@ static int sun8i_ths_register(struct ths_device *tmdev)
 						      i,
 						      &tmdev->sensor[i],
 						      &ths_ops);
-		if (IS_ERR(tmdev->sensor[i].tzd))
-			return PTR_ERR(tmdev->sensor[i].tzd);
+
+		/*
+		 * If an individual zone fails to register for reasons
+		 * other than probe deferral (eg, a bad DT) then carry
+		 * on, other zones might register successfully.
+		 */
+		if (IS_ERR(tmdev->sensor[i].tzd)) {
+			if (PTR_ERR(tmdev->sensor[i].tzd) == -EPROBE_DEFER)
+				return PTR_ERR(tmdev->sensor[i].tzd);
+			continue;
+		}
 
 		devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd);
 	}
@@ -618,6 +696,20 @@ static const struct ths_thermal_chip sun20i_d1_ths = {
 	.calc_temp = sun8i_ths_calc_temp,
 };
 
+static const struct ths_thermal_chip sun50i_h616_ths = {
+	.sensor_num = 4,
+	.has_bus_clk_reset = true,
+	.needs_sram = true,
+	.ft_deviation = 8000,
+	.offset = 263655,
+	.scale = 810,
+	.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+	.calibrate = sun50i_h6_ths_calibrate,
+	.init = sun50i_h6_thermal_init,
+	.irq_ack = sun50i_h6_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
 static const struct of_device_id of_ths_match[] = {
 	{ .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
 	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
@@ -627,6 +719,7 @@ static const struct of_device_id of_ths_match[] = {
 	{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
 	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
 	{ .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths },
+	{ .compatible = "allwinner,sun50i-h616-ths", .data = &sun50i_h616_ths },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, of_ths_match);

drivers/thermal/thermal_of.c

@@ -227,14 +227,18 @@ static int thermal_of_monitor_init(struct device_node *np, int *delay, int *pdel
 	int ret;
 
 	ret = of_property_read_u32(np, "polling-delay-passive", pdelay);
-	if (ret < 0) {
-		pr_err("%pOFn: missing polling-delay-passive property\n", np);
+	if (ret == -EINVAL) {
+		*pdelay = 0;
+	} else if (ret < 0) {
+		pr_err("%pOFn: Couldn't get polling-delay-passive: %d\n", np, ret);
 		return ret;
 	}
 
 	ret = of_property_read_u32(np, "polling-delay", delay);
-	if (ret < 0) {
-		pr_err("%pOFn: missing polling-delay property\n", np);
+	if (ret == -EINVAL) {
+		*delay = 0;
+	} else if (ret < 0) {
+		pr_err("%pOFn: Couldn't get polling-delay: %d\n", np, ret);
 		return ret;
 	}
 
@@ -460,7 +464,7 @@ static void thermal_of_zone_unregister(struct thermal_zone_device *tz)
  * @ops: A set of thermal sensor ops
  *
  * Return: a valid thermal zone structure pointer on success.
- * 	- EINVAL: if the device tree thermal description is malformed
+ *	- EINVAL: if the device tree thermal description is malformed
  *	- ENOMEM: if one structure can not be allocated
  *	- Other negative errors are returned by the underlying called functions
  */