ARM: tegra: cardhu: Support CPU frequency and voltage scaling on all board variants

Enable CPU frequency and voltage scaling on all Tegra30 Cardhu board
variants.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

arch/arm/boot/dts/tegra30-cardhu-a04.dts

@@ -2,8 +2,6 @@
 /dts-v1/;
 
 #include "tegra30-cardhu.dtsi"
-#include "tegra30-cpu-opp.dtsi"
-#include "tegra30-cpu-opp-microvolt.dtsi"
 
 /* This dts file support the cardhu A04 and later versions of board */
 
@@ -92,50 +90,4 @@ vdd_bl2_reg: regulator@106 {
 		enable-active-high;
 		gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
 	};
-
-	i2c@7000d000 {
-		pmic: tps65911@2d {
-			regulators {
-				vddctrl_reg: vddctrl {
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1125000>;
-					regulator-coupled-with = <&vddcore_reg>;
-					regulator-coupled-max-spread = <300000>;
-					regulator-max-step-microvolt = <100000>;
-
-					nvidia,tegra-cpu-regulator;
-				};
-			};
-		};
-
-		vddcore_reg: tps62361@60 {
-			regulator-coupled-with = <&vddctrl_reg>;
-			regulator-coupled-max-spread = <300000>;
-			regulator-max-step-microvolt = <100000>;
-
-			nvidia,tegra-core-regulator;
-		};
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@2 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@3 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
 };

arch/arm/boot/dts/tegra30-cardhu.dtsi

 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
 #include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
 
 /**
  * This file contains common DT entry for all fab version of Cardhu.
@@ -272,9 +274,14 @@ vdd2_reg: vdd2 {
 
 				vddctrl_reg: vddctrl {
 					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
 					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
 				};
 
 				vio_reg: vio {
@@ -342,17 +349,22 @@ temperature-sensor@4c {
 			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
 		};
 
-		tps62361@60 {
+		vdd_core: tps62361@60 {
 			compatible = "ti,tps62361";
 			reg = <0x60>;
 
 			regulator-name = "tps62361-vout";
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1500000>;
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
 			regulator-boot-on;
 			regulator-always-on;
 			ti,vsel0-state-high;
 			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
 		};
 	};
 
@@ -424,6 +436,28 @@ clk32k_in: clock@0 {
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu2: cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu3: cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wb01";
 		ddc-i2c-bus = <&panelddc>;