Commit ed4cb133 authored by Arjan van de Ven's avatar Arjan van de Ven Committed by David S. Miller

netdev: uniquify the tx_timeout name

there's several drivers that have use "tx_timeout" for the .. tx
timeout function.  All fine with that, they're static, however for
doing stats on how often which driver hits the timeout it's a tad
unfortunate. The patch below gives the ones I found in the
kerneloops.org database unique names.
Signed-off-by: default avatarArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 21ce4ffb
......@@ -431,7 +431,7 @@ static void getlinktype(struct net_device *dev);
static void getlinkstatus(struct net_device *dev);
static void netdev_timer(unsigned long data);
static void reset_timer(unsigned long data);
static void tx_timeout(struct net_device *dev);
static void fealnx_tx_timeout(struct net_device *dev);
static void init_ring(struct net_device *dev);
static int start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance);
......@@ -658,7 +658,7 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev,
dev->set_multicast_list = &set_rx_mode;
dev->do_ioctl = &mii_ioctl;
dev->ethtool_ops = &netdev_ethtool_ops;
dev->tx_timeout = &tx_timeout;
dev->tx_timeout = &fealnx_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
err = register_netdev(dev);
......@@ -1198,7 +1198,7 @@ static void reset_timer(unsigned long data)
}
static void tx_timeout(struct net_device *dev)
static void fealnx_tx_timeout(struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
void __iomem *ioaddr = np->mem;
......
......@@ -612,7 +612,7 @@ static void undo_cable_magic(struct net_device *dev);
static void check_link(struct net_device *dev);
static void netdev_timer(unsigned long data);
static void dump_ring(struct net_device *dev);
static void tx_timeout(struct net_device *dev);
static void ns_tx_timeout(struct net_device *dev);
static int alloc_ring(struct net_device *dev);
static void refill_rx(struct net_device *dev);
static void init_ring(struct net_device *dev);
......@@ -920,7 +920,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev,
dev->set_multicast_list = &set_rx_mode;
dev->change_mtu = &natsemi_change_mtu;
dev->do_ioctl = &netdev_ioctl;
dev->tx_timeout = &tx_timeout;
dev->tx_timeout = &ns_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
#ifdef CONFIG_NET_POLL_CONTROLLER
......@@ -1875,7 +1875,7 @@ static void dump_ring(struct net_device *dev)
}
}
static void tx_timeout(struct net_device *dev)
static void ns_tx_timeout(struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
void __iomem * ioaddr = ns_ioaddr(dev);
......@@ -3232,7 +3232,7 @@ static void __devexit natsemi_remove1 (struct pci_dev *pdev)
* suspend/resume synchronization:
* entry points:
* netdev_open, netdev_close, netdev_ioctl, set_rx_mode, intr_handler,
* start_tx, tx_timeout
* start_tx, ns_tx_timeout
*
* No function accesses the hardware without checking np->hands_off.
* the check occurs under spin_lock_irq(&np->lock);
......
......@@ -353,7 +353,7 @@ typedef struct local_info_t {
* Some more prototypes
*/
static int do_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void do_tx_timeout(struct net_device *dev);
static void xirc_tx_timeout(struct net_device *dev);
static void xirc2ps_tx_timeout_task(struct work_struct *work);
static struct net_device_stats *do_get_stats(struct net_device *dev);
static void set_addresses(struct net_device *dev);
......@@ -590,7 +590,7 @@ xirc2ps_probe(struct pcmcia_device *link)
dev->open = &do_open;
dev->stop = &do_stop;
#ifdef HAVE_TX_TIMEOUT
dev->tx_timeout = do_tx_timeout;
dev->tx_timeout = xirc_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task);
#endif
......@@ -1335,7 +1335,7 @@ xirc2ps_tx_timeout_task(struct work_struct *work)
}
static void
do_tx_timeout(struct net_device *dev)
xirc_tx_timeout(struct net_device *dev)
{
local_info_t *lp = netdev_priv(dev);
lp->stats.tx_errors++;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment