Merge tag 'qcom-arm64-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm into next/dt

Pull "Qualcomm ARM64 Updates for v4.4" from Andy Gross:

* Add RNG device tree node
* Add MSM8x16 serial UART1 node
* Enable eMMC on apq8016-sbc board
* Fix I2C pinconf sleep state function
* Add MSM8916 I2C nodes
* Enable I2C busses on LS and HS on APQ8016-sbc
* Enable SPI busses on LS and HS on APQ8016-sbc

* tag 'qcom-arm64-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm:
  arm64: dts: apq8016-sbc: enable spi buses on LS and HS
  arm64: dts: apq8016-sbc: enable i2c buses on LS and HS
  arm64: dts: qcom: Add msm8916 I2C nodes.
  arm64: dts: fix i2c pinconf sleep state function
  arm64: dts: qcom: Enable eMMC on apq8016-sbc board
  arm64: dts: qcom: Add 8x16 Serial UART1 node
  arm64: dts: qcom: Add RNG device tree node

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -19,6 +19,7 @@
 / {
 	aliases {
 		serial0 = &blsp1_uart2;
+		serial1 = &blsp1_uart1;
 	};
 
 	chosen {
@@ -33,6 +34,31 @@ serial@78b0000 {
 			pinctrl-1 = <&blsp1_uart2_sleep>;
 		};
 
+		i2c@78b6000 {
+		/* On Low speed expansion */
+			status = "okay";
+		};
+
+		i2c@78b8000 {
+		/* On High speed expansion */
+			status = "okay";
+		};
+
+		i2c@78ba000 {
+		/* On Low speed expansion */
+			status = "okay";
+		};
+
+		spi@78b7000 {
+		/* On High speed expansion */
+			status = "okay";
+		};
+
+		spi@78b9000 {
+		/* On Low speed expansion */
+			status = "okay";
+		};
+
 		leds {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msmgpio_leds>,
@@ -85,3 +111,7 @@ led@6 {
 		};
 	};
 };
+
+&sdhc_1 {
+	status = "okay";
+};

arch/arm64/boot/dts/qcom/msm8916-pins.dtsi

@@ -13,6 +13,30 @@
 
 &msmgpio {
 
+	blsp1_uart1_default: blsp1_uart1_default {
+		pinmux {
+			function = "blsp_uart1";
+			pins = "gpio0", "gpio1";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp1_uart1_sleep: blsp1_uart1_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio0", "gpio1";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
 	blsp1_uart2_default: blsp1_uart2_default {
 		pinmux {
 			function = "blsp_uart2";
@@ -27,7 +51,7 @@ pinconf {
 
 	blsp1_uart2_sleep: blsp1_uart2_sleep {
 		pinmux {
-			function = "blsp_uart2";
+			function = "gpio";
 			pins = "gpio4", "gpio5";
 		};
 		pinconf {
@@ -241,6 +265,30 @@ pinconf {
 		};
 	};
 
+	i2c2_default: i2c2_default {
+		pinmux {
+			function = "blsp_i2c2";
+			pins = "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio6", "gpio7";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c2_sleep: i2c2_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio6", "gpio7";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
 	i2c4_default: i2c4_default {
 		pinmux {
 			function = "blsp_i2c4";
@@ -255,7 +303,7 @@ pinconf {
 
 	i2c4_sleep: i2c4_sleep {
 		pinmux {
-			function = "blsp_i2c4";
+			function = "gpio";
 			pins = "gpio14", "gpio15";
 		};
 		pinconf {
@@ -265,6 +313,30 @@ pinconf {
 		};
 	};
 
+	i2c6_default: i2c6_default {
+		pinmux {
+			function = "blsp_i2c6";
+			pins = "gpio22", "gpio23";
+		};
+		pinconf {
+			pins = "gpio22", "gpio23";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c6_sleep: i2c6_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio22", "gpio23";
+		};
+		pinconf {
+			pins = "gpio22", "gpio23";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
 	sdhc2_cd_pin {
 		sdc2_cd_on: cd_on {
 			pinmux {

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -103,6 +103,15 @@ gcc: qcom,gcc@1800000 {
 			reg = <0x1800000 0x80000>;
 		};
 
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart2: serial@78b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78b0000 0x200>;
@@ -225,6 +234,21 @@ blsp_spi6: spi@78ba000 {
 			status = "disabled";
 		};
 
+		blsp_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b6000 0x1000>;
+			interrupts = <GIC_SPI 96 0>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		blsp_i2c4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x78b8000 0x1000>;
@@ -240,6 +264,21 @@ blsp_i2c4: i2c@78b8000 {
 			status = "disabled";
 		};
 
+		blsp_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78ba000 0x1000>;
+			interrupts = <GIC_SPI 100 0>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		sdhc_1: sdhci@07824000 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
@@ -391,6 +430,13 @@ spmi_bus: spmi@200f000 {
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
 	};
 };