Merge branch 'create-a-binding-for-the-marvell-mv88e6xxx-dsa-switches'

Linus Walleij says:

====================
Create a binding for the Marvell MV88E6xxx DSA switches

The Marvell switches are lacking DT bindings.

I need proper schema checking to add LED support to the
Marvell switch. Just how it is, it can't go on like this.

Some Device Tree fixes are included in the series, these
remove the major and most annoying warnings fallout noise:
some warnings remain, and these are of more serious nature,
such as missing phy-mode. They can be applied individually,
or to the networking tree with the rest of the patches.

Thanks to Andrew Lunn, Vladimir Oltean and Russell King
for excellent review and feedback!

This latest version employs special compatibles in the
odd ABI device trees.

v8: https://lore.kernel.org/r/20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org
v7: https://lore.kernel.org/r/20231024-marvell-88e6152-wan-led-v7-0-2869347697d1@linaro.org
v6: https://lore.kernel.org/r/20231024-marvell-88e6152-wan-led-v6-0-993ab0949344@linaro.org
v5: https://lore.kernel.org/r/20231023-marvell-88e6152-wan-led-v5-0-0e82952015a7@linaro.org
v4: https://lore.kernel.org/r/20231018-marvell-88e6152-wan-led-v4-0-3ee0c67383be@linaro.org
v3: https://lore.kernel.org/r/20231016-marvell-88e6152-wan-led-v3-0-38cd449dfb15@linaro.org
v2: https://lore.kernel.org/r/20231014-marvell-88e6152-wan-led-v2-0-7fca08b68849@linaro.org
v1: https://lore.kernel.org/r/20231013-marvell-88e6152-wan-led-v1-0-0712ba99857c@linaro.org
====================

Link: https://lore.kernel.org/r/20231127-marvell-88e6152-wan-led-v9-0-272934e04681@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/devicetree/bindings/net/dsa/dsa.yaml

@@ -46,4 +46,10 @@ $defs:
             $ref: dsa-port.yaml#
             unevaluatedProperties: false
 
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
 ...

Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MV88E6060 DSA switch
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description:
+  The Marvell MV88E6060 switch has been produced and sold by Marvell
+  since at least 2008. The switch has one pin ADDR4 that controls the
+  MDIO address of the switch to be 0x10 or 0x00, and on the MDIO bus
+  connected to the switch, the PHYs inside the switch appear as
+  independent devices on address 0x00-0x04 or 0x10-0x14, so in difference
+  from many other DSA switches this switch does not have an internal
+  MDIO bus for the PHY devices.
+
+properties:
+  compatible:
+    const: marvell,mv88e6060
+    description:
+      The MV88E6060 is the oldest Marvell DSA switch product, and
+      as such a bit limited in features compared to later hardware.
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO to be used to reset the whole device
+    maxItems: 1
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@16 {
+            compatible = "marvell,mv88e6060";
+            reg = <16>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ethernet-port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                ethernet-port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                ethernet-port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                ethernet-port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                ethernet-port@5 {
+                    reg = <5>;
+                    phy-mode = "rev-mii";
+                    ethernet = <&ethc>;
+                    fixed-link {
+                        speed = <100>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };

Documentation/devicetree/bindings/net/dsa/marvell.txt

-Marvell DSA Switch Device Tree Bindings
----------------------------------------
-
-WARNING: This binding is currently unstable. Do not program it into a
-FLASH never to be changed again. Once this binding is stable, this
-warning will be removed.
-
-If you need a stable binding, use the old dsa.txt binding.
-
-Marvell Switches are MDIO devices. The following properties should be
-placed as a child node of an mdio device.
-
-The properties described here are those specific to Marvell devices.
-Additional required and optional properties can be found in dsa.txt.
-
-The compatibility string is used only to find an identification register,
-which is at a different MDIO base address in different switch families.
-- "marvell,mv88e6085"	: Switch has base address 0x10. Use with models:
-			  6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165,
-			  6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
-			  6341, 6350, 6351, 6352
-- "marvell,mv88e6190"	: Switch has base address 0x00. Use with models:
-			  6190, 6190X, 6191, 6290, 6361, 6390, 6390X
-- "marvell,mv88e6250"	: Switch has base address 0x08 or 0x18. Use with model:
-			  6220, 6250
-
-Required properties:
-- compatible		: Should be one of "marvell,mv88e6085",
-			  "marvell,mv88e6190" or "marvell,mv88e6250" as
-			  indicated above
-- reg			: Address on the MII bus for the switch.
-
-Optional properties:
-
-- reset-gpios		: Should be a gpio specifier for a reset line
-- interrupts		: Interrupt from the switch
-- interrupt-controller	: Indicates the switch is itself an interrupt
-			  controller. This is used for the PHY interrupts.
-#interrupt-cells = <2>	: Controller uses two cells, number and flag
-- eeprom-length		: Set to the length of an EEPROM connected to the
-			  switch. Must be set if the switch can not detect
-			  the presence and/or size of a connected EEPROM,
-			  otherwise optional.
-- mdio			: Container of PHY and devices on the switches MDIO
-			  bus.
-- mdio?		: Container of PHYs and devices on the external MDIO
-			  bus. The node must contains a compatible string of
-			  "marvell,mv88e6xxx-mdio-external"
-
-Example:
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		switch0: switch@0 {
-			compatible = "marvell,mv88e6085";
-			reg = <0>;
-			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				switch1phy0: switch1phy0@0 {
-					reg = <0>;
-					interrupt-parent = <&switch0>;
-					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-		};
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		switch0: switch@0 {
-			compatible = "marvell,mv88e6190";
-			reg = <0>;
-			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				switch1phy0: switch1phy0@0 {
-					reg = <0>;
-					interrupt-parent = <&switch0>;
-					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-
-			mdio1 {
-				compatible = "marvell,mv88e6xxx-mdio-external";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				switch1phy9: switch1phy0@9 {
-					reg = <9>;
-				};
-			};
-		};
-	};

Documentation/devicetree/bindings/net/ethernet-switch.yaml

@@ -20,9 +20,26 @@ description:
 
 select: false
 
-properties:
-  $nodename:
-    pattern: "^(ethernet-)?switch(@.*)?$"
+allOf:
+  # This condition is here to satisfy the case where certain device
+  # nodes have to preserve non-standard names because of
+  # backward-compatibility with boot loaders inspecting certain
+  # node names.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,turris-mox-mv88e6085
+              - marvell,turris-mox-mv88e6190
+    then:
+      properties:
+        $nodename:
+          pattern: "switch[0-3]@[0-3]+$"
+    else:
+      properties:
+        $nodename:
+          pattern: "^(ethernet-)?switch(@.*)?$"
 
 patternProperties:
   "^(ethernet-)?ports$":

Documentation/devicetree/bindings/net/marvell,mvusb.yaml

@@ -50,11 +50,14 @@ examples:
                     #address-cells = <1>;
                     #size-cells = <0>;
 
-                    switch@0 {
+                    ethernet-switch@0 {
                             compatible = "marvell,mv88e6190";
                             reg = <0x0>;
 
-                            ports {
+                            ethernet-ports {
+                                    #address-cells = <1>;
+                                    #size-cells = <0>;
+
                                     /* Port definitions */
                             };
 

MAINTAINERS

@@ -12773,7 +12773,8 @@ MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER
 M:	Andrew Lunn <andrew@lunn.ch>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/dsa/marvell.txt
+F:	Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml
+F:	Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml
 F:	Documentation/networking/devlink/mv88e6xxx.rst
 F:	drivers/net/dsa/mv88e6xxx/
 F:	include/linux/dsa/mv88e6xxx.h